Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED)
0.1.0 - ci-build

Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED) - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: MOPEDCondition - Detailed Descriptions

Draft as of 2024-11-21

Definitions for the MOPEDCondition resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Condition
2. Condition.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..?
SlicingThis element introduces a set of slices on Condition.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ type.coding.code
  • 4. Condition.identifier:MOPEDConditionIdentifier
    Slice NameMOPEDConditionIdentifier
    ShortMOPED Identifier = Aufnahmezahl+ICD10Code
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control1..1
    6. Condition.identifier:MOPEDConditionIdentifier.type
    BindingThe codes SHALL be taken from hl7VS-identifierType
    (required to http://terminology.hl7.org/ValueSet/v2-0203)
    8. Condition.identifier:MOPEDConditionIdentifier.type.coding
    10. Condition.identifier:MOPEDConditionIdentifier.type.coding.code
    Control1..?
    Fixed ValueRI
    12. Condition.clinicalStatus
    14. Condition.clinicalStatus.extension
    Control1..?
    16. Condition.clinicalStatus.extension:data-absent-reason
    Slice Namedata-absent-reason
    Control1..1
    TypeExtension(Data Absent Reason) (Extension Type: code)
    18. Condition.clinicalStatus.extension:data-absent-reason.value[x]
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Pattern Valuenot-asked
    20. Condition.verificationStatus
    Control1..?
    22. Condition.code
    Control1..?
    24. Condition.code.coding
    Control2..?
    SlicingThis element introduces a set of slices on Condition.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ system
    • 26. Condition.code.coding:ICD10
      Slice NameICD10
      Control1..1
      BindingThe codes SHALL be taken from https://termgit.elga.gv.at/CodeSystem/bmg-icd-10-2024
      (required to https://termgit.elga.gv.at/CodeSystem/bmg-icd-10-2024)
      28. Condition.code.coding:ICD10.system
      Control1..?
      Pattern Valuehttps://termgit.elga.gv.at/CodeSystem/bmg-icd-10-2024
      30. Condition.code.coding:HDG
      Slice NameHDG
      Control1..1
      BindingThe codes SHALL be taken from LKF Hauptdiagnosegruppen
      (required to http://example.org/ValueSet/moped-LKFHauptdiagnosegruppen-valueset)
      32. Condition.code.coding:HDG.system
      Control1..?
      Pattern Valuehttp://tbd.at/MOPED-LKFHauptdiagnosegruppen
      34. Condition.subject
      TypeReference(HL7® AT Core Patient Profile)
      36. Condition.encounter
      Control1..?
      TypeReference(MOPEDEncounter)

      Guidance on how to interpret the contents of this table can be found here

      0. Condition
      Definition

      A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

      ShortDetailed information about conditions, problems or diagnoses
      Control0..*
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantscon-2: If category is problems list item, the clinicalStatus should not be unknown (category.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-category' and code='problem-list-item').exists() implies clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and code='unknown').exists().not())
      con-3: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission. (abatement.exists() implies (clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='inactive' or code='resolved' or code='remission')).exists()))
      dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. Condition.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      4. Condition.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

      Control0..*
      This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
      TypeResource
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      6. Condition.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Must Supportfalse
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      8. Condition.identifier
      Definition

      Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

      ShortExternal Ids for this condition
      Comments

      This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control10..*
      TypeIdentifier
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Requirements

      Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Condition.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ type.coding.code
      • 10. Condition.identifier:MOPEDConditionIdentifier
        Slice NameMOPEDConditionIdentifier
        Definition

        Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

        ShortMOPED Identifier = Aufnahmezahl+ICD10CodeExternal Ids for this condition
        Comments

        This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control10..1*
        TypeIdentifier
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Requirements

        Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. Condition.identifier:MOPEDConditionIdentifier.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..1
        BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|5.0.0
        (required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. Condition.identifier:MOPEDConditionIdentifier.type
        Definition

        A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

        ShortDescription of identifier
        Comments

        This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

        Control0..1
        BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from hl7VS-identifierTypehttp://hl7.org/fhir/ValueSet/identifier-type
        (required to http://terminology.hl7.org/ValueSet/v2-0203)
        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows users to make use of identifiers when the identifier system is not known.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. Condition.clinicalStatus
        Definition

        The clinical status of the condition.

        Shortactive | recurrence | relapse | inactive | remission | resolved | unknown
        Comments

        The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity. clinicalStatus is required since it is a modifier element. For conditions that are problems list items, the clinicalStatus should not be unknown. For conditions that are not problem list items, the clinicalStatus may be unknown. For example, conditions derived from a claim are point in time, so those conditions may have a clinicalStatus of unknown

        Control1..1
        This element is affected by the following invariants: con-3, con-2
        BindingThe codes SHALL be taken from ConditionClinicalStatusCodeshttp://hl7.org/fhir/ValueSet/condition-clinical|5.0.0
        (required to http://hl7.org/fhir/ValueSet/condition-clinical|5.0.0)

        The clinical status of the condition or diagnosis.

        TypeCodeableConcept
        Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        18. Condition.clinicalStatus.extension
        Definition

        An Extension


        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortExtensionAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control10..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Condition.clinicalStatus.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 20. Condition.clinicalStatus.extension:data-absent-reason
          Slice Namedata-absent-reason
          Definition

          Provides a reason why the expected value or elements in the element that is extended are missing.

          Shortunknown | asked | temp | notasked | masked | unsupported | astext | error
          Control1..1
          TypeExtension(Data Absent Reason) (Extension Type: code)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          22. Condition.clinicalStatus.extension:data-absent-reason.extension
          Definition

          An Extension


          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortExtensionAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..0*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Condition.clinicalStatus.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 24. Condition.clinicalStatus.extension:data-absent-reason.url
            Definition

            Source of the definition for the extension code - a logical name or a URL.

            Shortidentifies the meaning of the extension
            Comments

            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

            Control1..1
            Typeuri
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            Fixed Valuehttp://hl7.org/fhir/StructureDefinition/data-absent-reason
            26. Condition.clinicalStatus.extension:data-absent-reason.value[x]
            Definition

            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

            ShortValue of extension
            Control10..1
            This element is affected by the following invariants: ext-1
            BindingThe codes SHALL be taken from For codes, see DataAbsentReason
            (required to http://hl7.org/fhir/ValueSet/data-absent-reason)
            Typecode, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Pattern Valuenot-asked
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            28. Condition.verificationStatus
            Definition

            The verification status to support the clinical status of the condition. The verification status pertains to the condition, itself, not to any specific condition attribute.

            Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
            Comments

            verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

            Control10..1
            BindingThe codes SHALL be taken from ConditionVerificationStatushttp://hl7.org/fhir/ValueSet/condition-ver-status|5.0.0
            (required to http://hl7.org/fhir/ValueSet/condition-ver-status|5.0.0)

            The verification status to support or decline the clinical status of the condition or diagnosis.

            TypeCodeableConcept
            Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. Condition.code
            Definition

            Identification of the condition, problem or diagnosis.

            ShortIdentification of the condition, problem or diagnosis
            Control10..1
            BindingFor example codes, see ConditionProblemDiagnosisCodeshttp://hl7.org/fhir/ValueSet/condition-code
            (example to http://hl7.org/fhir/ValueSet/condition-code)

            Identification of the condition or diagnosis.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Requirements

            0..1 to account for primarily narrative only resources.

            Alternate Namestype
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            32. Condition.code.coding
            Definition

            A reference to a code defined by a terminology system.

            ShortCode defined by a terminology system
            Comments

            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

            Control20..*
            TypeCoding
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows for alternative encodings within a code system, and translations to other code systems.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Condition.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ system
            • 34. Condition.code.coding:ICD10
              Slice NameICD10
              Definition

              A reference to a code defined by a terminology system.

              ShortCode defined by a terminology system
              Comments

              Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

              Control10..1*
              BindingThe codes SHALL be taken from For codes, see https://termgit.elga.gv.at/CodeSystem/bmg-icd-10-2024
              (required to https://termgit.elga.gv.at/CodeSystem/bmg-icd-10-2024)
              TypeCoding
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows for alternative encodings within a code system, and translations to other code systems.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              36. Condition.code.coding:ICD10.system
              Definition

              The identification of the code system that defines the meaning of the symbol in the code.

              ShortIdentity of the terminology system
              Comments

              The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

              Control10..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Need to be unambiguous about the source of the definition of the symbol.

              Pattern Valuehttps://termgit.elga.gv.at/CodeSystem/bmg-icd-10-2024
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              38. Condition.code.coding:HDG
              Slice NameHDG
              Definition

              A reference to a code defined by a terminology system.

              ShortCode defined by a terminology system
              Comments

              Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

              Control10..1*
              BindingThe codes SHALL be taken from For codes, see LKF Hauptdiagnosegruppen
              (required to http://example.org/ValueSet/moped-LKFHauptdiagnosegruppen-valueset)
              TypeCoding
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows for alternative encodings within a code system, and translations to other code systems.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              40. Condition.code.coding:HDG.system
              Definition

              The identification of the code system that defines the meaning of the symbol in the code.

              ShortIdentity of the terminology system
              Comments

              The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

              Control10..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Need to be unambiguous about the source of the definition of the symbol.

              Pattern Valuehttp://tbd.at/MOPED-LKFHauptdiagnosegruppen
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              42. Condition.subject
              Definition

              Indicates the patient or group who the condition record is associated with.

              ShortWho has the condition?
              Control1..1
              TypeReference(HL7® AT Core Patient Profile, Patient, Group)
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Requirements

              Group is typically used for veterinary or public health use cases.

              Alternate Namespatient
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. Condition.encounter
              Definition

              The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

              ShortThe Encounter during which this Condition was created
              Comments

              This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

              Control10..1
              TypeReference(MOPEDEncounter, Encounter)
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

              Guidance on how to interpret the contents of this table can be found here

              0. Condition
              Definition

              A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

              ShortDetailed information about conditions, problems or diagnoses
              Control0..*
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantscon-2: If category is problems list item, the clinicalStatus should not be unknown (category.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-category' and code='problem-list-item').exists() implies clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and code='unknown').exists().not())
              con-3: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission. (abatement.exists() implies (clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='inactive' or code='resolved' or code='remission')).exists()))
              dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              2. Condition.id
              Definition

              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              ShortLogical id of this artifact
              Comments

              Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

              Control0..1
              Typeid
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              4. Condition.meta
              Definition

              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              ShortMetadata about the resource
              Control0..1
              TypeMeta
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. Condition.implicitRules
              Definition

              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

              ShortA set of rules under which this content was created
              Comments

              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

              Control0..1
              Typeuri
              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              8. Condition.language
              Definition

              The base language in which the resource is written.

              ShortLanguage of the resource content
              Comments

              Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

              Control0..1
              BindingThe codes SHALL be taken from AllLanguages
              (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

              IETF language tag for a human language

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              10. Condition.text
              Definition

              A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

              ShortText summary of the resource, for human interpretation
              Comments

              Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

              Control0..1
              This element is affected by the following invariants: dom-6
              TypeNarrative
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate Namesnarrative, html, xhtml, display
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              12. Condition.contained
              Definition

              These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

              ShortContained, inline Resources
              Comments

              This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

              Control0..*
              This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
              TypeResource
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate Namesinline resources, anonymous resources, contained resources
              14. Condition.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              16. Condition.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
              Must Supportfalse
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              18. Condition.identifier
              Definition

              Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

              ShortExternal Ids for this condition
              Comments

              This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control1..*
              TypeIdentifier
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Requirements

              Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Condition.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ type.coding.code
              • 20. Condition.identifier:MOPEDConditionIdentifier
                Slice NameMOPEDConditionIdentifier
                Definition

                Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

                ShortMOPED Identifier = Aufnahmezahl+ICD10Code
                Comments

                This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control1..1
                TypeIdentifier
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Requirements

                Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                22. Condition.identifier:MOPEDConditionIdentifier.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typeid
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                24. Condition.identifier:MOPEDConditionIdentifier.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Condition.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 26. Condition.identifier:MOPEDConditionIdentifier.use
                  Definition

                  The purpose of this identifier.

                  Shortusual | official | temp | secondary | old (If known)
                  Comments

                  Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                  Control0..1
                  BindingThe codes SHALL be taken from IdentifierUse
                  (required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

                  Identifies the purpose for this identifier, if known .

                  Typecode
                  Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  28. Condition.identifier:MOPEDConditionIdentifier.type
                  Definition

                  A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                  ShortDescription of identifier
                  Comments

                  This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                  Control0..1
                  BindingThe codes SHALL be taken from hl7VS-identifierType
                  (required to http://terminology.hl7.org/ValueSet/v2-0203)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Allows users to make use of identifiers when the identifier system is not known.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  30. Condition.identifier:MOPEDConditionIdentifier.type.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typeid
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  32. Condition.identifier:MOPEDConditionIdentifier.type.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Condition.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 34. Condition.identifier:MOPEDConditionIdentifier.type.coding
                    Definition

                    A reference to a code defined by a terminology system.

                    ShortCode defined by a terminology system
                    Comments

                    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                    Control0..*
                    TypeCoding
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Allows for alternative encodings within a code system, and translations to other code systems.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    36. Condition.identifier:MOPEDConditionIdentifier.type.coding.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typeid
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    38. Condition.identifier:MOPEDConditionIdentifier.type.coding.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Condition.identifier.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 40. Condition.identifier:MOPEDConditionIdentifier.type.coding.system
                      Definition

                      The identification of the code system that defines the meaning of the symbol in the code.

                      ShortIdentity of the terminology system
                      Comments

                      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

                      Control0..1
                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Need to be unambiguous about the source of the definition of the symbol.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      42. Condition.identifier:MOPEDConditionIdentifier.type.coding.version
                      Definition

                      The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                      ShortVersion of the system - if relevant
                      Comments

                      Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                      NoteThis is a business version Id, not a resource version Id (see discussion)
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      44. Condition.identifier:MOPEDConditionIdentifier.type.coding.code
                      Definition

                      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                      ShortSymbol in syntax defined by the system
                      Control1..1
                      This element is affected by the following invariants: cod-1
                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Need to refer to a particular code in the system.

                      Fixed ValueRI
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      46. Condition.identifier:MOPEDConditionIdentifier.type.coding.display
                      Definition

                      A representation of the meaning of the code in the system, following the rules of the system.

                      ShortRepresentation defined by the system
                      Control0..1
                      This element is affected by the following invariants: cod-1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      48. Condition.identifier:MOPEDConditionIdentifier.type.coding.userSelected
                      Definition

                      Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                      ShortIf this coding was chosen directly by the user
                      Comments

                      Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                      Control0..1
                      Typeboolean
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      50. Condition.identifier:MOPEDConditionIdentifier.type.text
                      Definition

                      A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                      ShortPlain text representation of the concept
                      Comments

                      Very often the text is the same as a displayName of one of the codings.

                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      52. Condition.identifier:MOPEDConditionIdentifier.system
                      Definition

                      Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

                      ShortThe namespace for the identifier value
                      Comments

                      Identifier.system is always case sensitive.

                      Control0..1
                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      54. Condition.identifier:MOPEDConditionIdentifier.value
                      Definition

                      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                      ShortThe value that is unique
                      Comments

                      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                      Control0..1
                      This element is affected by the following invariants: ident-1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Example<br/><b>General</b>:123456
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      56. Condition.identifier:MOPEDConditionIdentifier.period
                      Definition

                      Time period during which identifier is/was valid for use.

                      ShortTime period when id is/was valid for use
                      Control0..1
                      TypePeriod
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      58. Condition.identifier:MOPEDConditionIdentifier.assigner
                      Definition

                      Organization that issued/manages the identifier.

                      ShortOrganization that issued id (may be just text)
                      Comments

                      The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                      Control0..1
                      TypeReference(Organization)
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      60. Condition.clinicalStatus
                      Definition

                      The clinical status of the condition.

                      Shortactive | recurrence | relapse | inactive | remission | resolved | unknown
                      Comments

                      The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity. clinicalStatus is required since it is a modifier element. For conditions that are problems list items, the clinicalStatus should not be unknown. For conditions that are not problem list items, the clinicalStatus may be unknown. For example, conditions derived from a claim are point in time, so those conditions may have a clinicalStatus of unknown

                      Control1..1
                      This element is affected by the following invariants: con-3, con-2
                      BindingThe codes SHALL be taken from ConditionClinicalStatusCodes
                      (required to http://hl7.org/fhir/ValueSet/condition-clinical|5.0.0)

                      The clinical status of the condition or diagnosis.

                      TypeCodeableConcept
                      Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
                      Must Supportfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      62. Condition.clinicalStatus.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typeid
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      64. Condition.clinicalStatus.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control1..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Condition.clinicalStatus.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 66. Condition.clinicalStatus.extension:data-absent-reason
                        Slice Namedata-absent-reason
                        Definition

                        Provides a reason why the expected value or elements in the element that is extended are missing.

                        Shortunknown | asked | temp | notasked | masked | unsupported | astext | error
                        Control1..1
                        TypeExtension(Data Absent Reason) (Extension Type: code)
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        68. Condition.clinicalStatus.extension:data-absent-reason.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typeid
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        70. Condition.clinicalStatus.extension:data-absent-reason.extension
                        Definition

                        An Extension

                        ShortExtension
                        Control0..0
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Condition.clinicalStatus.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 72. Condition.clinicalStatus.extension:data-absent-reason.url
                          Definition

                          Source of the definition for the extension code - a logical name or a URL.

                          Shortidentifies the meaning of the extension
                          Comments

                          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                          Control1..1
                          Typeuri
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          Fixed Valuehttp://hl7.org/fhir/StructureDefinition/data-absent-reason
                          74. Condition.clinicalStatus.extension:data-absent-reason.value[x]
                          Definition

                          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                          ShortValue of extension
                          Control1..1
                          This element is affected by the following invariants: ext-1
                          BindingThe codes SHALL be taken from DataAbsentReason
                          (required to http://hl7.org/fhir/ValueSet/data-absent-reason)
                          Typecode
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Pattern Valuenot-asked
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          76. Condition.clinicalStatus.coding
                          Definition

                          A reference to a code defined by a terminology system.

                          ShortCode defined by a terminology system
                          Comments

                          Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                          Control0..*
                          TypeCoding
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Allows for alternative encodings within a code system, and translations to other code systems.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          78. Condition.clinicalStatus.text
                          Definition

                          A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                          ShortPlain text representation of the concept
                          Comments

                          Very often the text is the same as a displayName of one of the codings.

                          Control0..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          80. Condition.verificationStatus
                          Definition

                          The verification status to support the clinical status of the condition. The verification status pertains to the condition, itself, not to any specific condition attribute.

                          Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
                          Comments

                          verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

                          Control1..1
                          BindingThe codes SHALL be taken from ConditionVerificationStatus
                          (required to http://hl7.org/fhir/ValueSet/condition-ver-status|5.0.0)

                          The verification status to support or decline the clinical status of the condition or diagnosis.

                          TypeCodeableConcept
                          Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
                          Must Supportfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          82. Condition.category
                          Definition

                          A category assigned to the condition.

                          Shortproblem-list-item | encounter-diagnosis
                          Comments

                          The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

                          Control0..*
                          This element is affected by the following invariants: con-2
                          BindingThe codes SHOULD be taken from ConditionCategoryCodes
                          (preferred to http://hl7.org/fhir/ValueSet/condition-category)

                          A category assigned to the condition.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Must Supportfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          84. Condition.severity
                          Definition

                          A subjective assessment of the severity of the condition as evaluated by the clinician.

                          ShortSubjective severity of condition
                          Comments

                          Coding of the severity with a terminology is preferred, where possible.

                          Control0..1
                          BindingThe codes SHOULD be taken from ConditionDiagnosisSeverity
                          (preferred to http://hl7.org/fhir/ValueSet/condition-severity)

                          A subjective assessment of the severity of the condition as evaluated by the clinician.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Must Supportfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          86. Condition.code
                          Definition

                          Identification of the condition, problem or diagnosis.

                          ShortIdentification of the condition, problem or diagnosis
                          Control1..1
                          BindingFor example codes, see ConditionProblemDiagnosisCodes
                          (example to http://hl7.org/fhir/ValueSet/condition-code)

                          Identification of the condition or diagnosis.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Must Supportfalse
                          Summarytrue
                          Requirements

                          0..1 to account for primarily narrative only resources.

                          Alternate Namestype
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          88. Condition.code.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          This element is affected by the following invariants: ele-1
                          Typeid
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          90. Condition.code.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Condition.code.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 92. Condition.code.coding
                            Definition

                            A reference to a code defined by a terminology system.

                            ShortCode defined by a terminology system
                            Comments

                            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                            Control2..*
                            TypeCoding
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            Allows for alternative encodings within a code system, and translations to other code systems.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            SlicingThis element introduces a set of slices on Condition.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ system
                            • 94. Condition.code.coding:ICD10
                              Slice NameICD10
                              Definition

                              A reference to a code defined by a terminology system.

                              ShortCode defined by a terminology system
                              Comments

                              Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                              Control1..1
                              BindingThe codes SHALL be taken from https://termgit.elga.gv.at/CodeSystem/bmg-icd-10-2024
                              (required to https://termgit.elga.gv.at/CodeSystem/bmg-icd-10-2024)
                              TypeCoding
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              Allows for alternative encodings within a code system, and translations to other code systems.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              96. Condition.code.coding:ICD10.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              Typeid
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              98. Condition.code.coding:ICD10.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Condition.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 100. Condition.code.coding:ICD10.system
                                Definition

                                The identification of the code system that defines the meaning of the symbol in the code.

                                ShortIdentity of the terminology system
                                Comments

                                The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

                                Control1..1
                                Typeuri
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Need to be unambiguous about the source of the definition of the symbol.

                                Pattern Valuehttps://termgit.elga.gv.at/CodeSystem/bmg-icd-10-2024
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                102. Condition.code.coding:ICD10.version
                                Definition

                                The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                ShortVersion of the system - if relevant
                                Comments

                                Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                NoteThis is a business version Id, not a resource version Id (see discussion)
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                104. Condition.code.coding:ICD10.code
                                Definition

                                A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                                ShortSymbol in syntax defined by the system
                                Control0..1
                                This element is affected by the following invariants: cod-1
                                Typecode
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Need to refer to a particular code in the system.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                106. Condition.code.coding:ICD10.display
                                Definition

                                A representation of the meaning of the code in the system, following the rules of the system.

                                ShortRepresentation defined by the system
                                Control0..1
                                This element is affected by the following invariants: cod-1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                108. Condition.code.coding:ICD10.userSelected
                                Definition

                                Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                ShortIf this coding was chosen directly by the user
                                Comments

                                Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                Control0..1
                                Typeboolean
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                110. Condition.code.coding:HDG
                                Slice NameHDG
                                Definition

                                A reference to a code defined by a terminology system.

                                ShortCode defined by a terminology system
                                Comments

                                Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                Control1..1
                                BindingThe codes SHALL be taken from LKF Hauptdiagnosegruppen
                                (required to http://example.org/ValueSet/moped-LKFHauptdiagnosegruppen-valueset)
                                TypeCoding
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                Allows for alternative encodings within a code system, and translations to other code systems.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                112. Condition.code.coding:HDG.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typeid
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                114. Condition.code.coding:HDG.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Condition.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                • 116. Condition.code.coding:HDG.system
                                  Definition

                                  The identification of the code system that defines the meaning of the symbol in the code.

                                  ShortIdentity of the terminology system
                                  Comments

                                  The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

                                  Control1..1
                                  Typeuri
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  Need to be unambiguous about the source of the definition of the symbol.

                                  Pattern Valuehttp://tbd.at/MOPED-LKFHauptdiagnosegruppen
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  118. Condition.code.coding:HDG.version
                                  Definition

                                  The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                  ShortVersion of the system - if relevant
                                  Comments

                                  Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                  NoteThis is a business version Id, not a resource version Id (see discussion)
                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  120. Condition.code.coding:HDG.code
                                  Definition

                                  A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                                  ShortSymbol in syntax defined by the system
                                  Control0..1
                                  This element is affected by the following invariants: cod-1
                                  Typecode
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  Need to refer to a particular code in the system.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  122. Condition.code.coding:HDG.display
                                  Definition

                                  A representation of the meaning of the code in the system, following the rules of the system.

                                  ShortRepresentation defined by the system
                                  Control0..1
                                  This element is affected by the following invariants: cod-1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  124. Condition.code.coding:HDG.userSelected
                                  Definition

                                  Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                  ShortIf this coding was chosen directly by the user
                                  Comments

                                  Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                  Control0..1
                                  Typeboolean
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  126. Condition.code.text
                                  Definition

                                  A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                  ShortPlain text representation of the concept
                                  Comments

                                  Very often the text is the same as a displayName of one of the codings.

                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  128. Condition.bodySite
                                  Definition

                                  The anatomical location where this condition manifests itself.

                                  ShortAnatomical location, if relevant
                                  Comments

                                  Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodyStructure resource (e.g. to identify and track separately) then use the standard extension http://hl7.org/fhir/StructureDefinition/bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

                                  Control0..*
                                  BindingFor example codes, see SNOMEDCTBodyStructures
                                  (example to http://hl7.org/fhir/ValueSet/body-site)

                                  SNOMED CT Body site concepts

                                  TypeCodeableConcept
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  130. Condition.subject
                                  Definition

                                  Indicates the patient or group who the condition record is associated with.

                                  ShortWho has the condition?
                                  Control1..1
                                  TypeReference(HL7® AT Core Patient Profile)
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summarytrue
                                  Requirements

                                  Group is typically used for veterinary or public health use cases.

                                  Alternate Namespatient
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  132. Condition.encounter
                                  Definition

                                  The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

                                  ShortThe Encounter during which this Condition was created
                                  Comments

                                  This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

                                  Control1..1
                                  TypeReference(MOPEDEncounter)
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  134. Condition.onset[x]
                                  Definition

                                  Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                                  ShortEstimated or actual date, date-time, or age
                                  Comments

                                  Age is generally used when the patient reports an age at which the Condition began to occur. Period is generally used to convey an imprecise onset that occurred within the time period. For example, Period is not intended to convey the transition period before the chronic bronchitis or COPD condition was diagnosed, but Period can be used to convey an imprecise diagnosis date. Range is generally used to convey an imprecise age range (e.g. 4 to 6 years old). Because a Condition.code can represent multiple levels of granularity and can be modified over time, the onset and abatement dates can have ambiguity whether those dates apply to the current Condition.code or an earlier representation of that Condition.code. For example, if the Condition.code was initially documented as severe asthma, then it is ambiguous whether the onset and abatement dates apply to asthma (overall in that subject's lifetime) or when asthma transitioned to become severe.

                                  Control0..1
                                  TypeChoice of: dateTime, Age, Period, Range, string
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supportfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  136. Condition.abatement[x]
                                  Definition

                                  The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Some conditions, such as chronic conditions, are never really resolved, but they can abate.

                                  ShortWhen in resolution/remission
                                  Comments

                                  There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated. Because a Condition.code can represent multiple levels of granularity and can be modified over time, the onset and abatement dates can have ambiguity whether those dates apply to the current Condition.code or an earlier representation of that Condition.code. For example, if the Condition.code was initially documented as severe asthma, then it is ambiguous whether the onset and abatement dates apply to asthma (overall in that subject's lifetime) or when asthma transitioned to become severe.

                                  Control0..1
                                  This element is affected by the following invariants: con-3
                                  TypeChoice of: dateTime, Age, Period, Range, string
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  138. Condition.recordedDate
                                  Definition

                                  The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date.

                                  ShortDate condition was first recorded
                                  Comments

                                  When onset date is unknown, recordedDate can be used to establish if the condition was present on or before a given date. If the recordedDate is known and provided by a sending system, it is preferred that the receiving system preserve that recordedDate value. If the recordedDate is not provided by the sending system, the receipt timestamp is sometimes used as the recordedDate.

                                  Control0..1
                                  TypedateTime
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supportfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  140. Condition.participant
                                  Definition

                                  Indicates who or what participated in the activities related to the condition and how they were involved.

                                  ShortWho or what participated in the activities related to the condition and how they were involved
                                  Control0..*
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  142. Condition.participant.id
                                  Definition

                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                  ShortUnique id for inter-element referencing
                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  Typestring
                                  Is Modifierfalse
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  Summaryfalse
                                  144. Condition.participant.extension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                  ShortAdditional content defined by implementations
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate Namesextensions, user content
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  146. Condition.participant.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  148. Condition.participant.function
                                  Definition

                                  Distinguishes the type of involvement of the actor in the activities related to the condition.

                                  ShortType of involvement
                                  Control0..1
                                  BindingUnless not suitable, these codes SHALL be taken from ParticipationRoleType
                                  (extensible to http://hl7.org/fhir/ValueSet/participation-role-type)
                                  TypeCodeableConcept
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  150. Condition.participant.actor
                                  Definition

                                  Indicates who or what participated in the activities related to the condition.

                                  ShortWho or what participated in the activities related to the condition
                                  Control1..1
                                  TypeReference(Practitioner, PractitionerRole, Patient, RelatedPerson, Device, Organization, CareTeam)
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  152. Condition.stage
                                  Definition

                                  A simple summary of the stage such as "Stage 3" or "Early Onset". The determination of the stage is disease-specific, such as cancer, retinopathy of prematurity, kidney diseases, Alzheimer's, or Parkinson disease.

                                  ShortStage/grade, usually assessed formally
                                  Control0..*
                                  TypeBackboneElement
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantscon-1: Stage SHALL have summary or assessment (summary.exists() or assessment.exists())
                                  ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  154. Condition.stage.id
                                  Definition

                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                  ShortUnique id for inter-element referencing
                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  Typestring
                                  Is Modifierfalse
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  Summaryfalse
                                  156. Condition.stage.extension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                  ShortAdditional content defined by implementations
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate Namesextensions, user content
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  158. Condition.stage.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  160. Condition.stage.summary
                                  Definition

                                  A simple summary of the stage such as "Stage 3" or "Early Onset". The determination of the stage is disease-specific, such as cancer, retinopathy of prematurity, kidney diseases, Alzheimer's, or Parkinson disease.

                                  ShortSimple summary (disease specific)
                                  Control0..1
                                  This element is affected by the following invariants: con-1
                                  BindingFor example codes, see ConditionStage
                                  (example to http://hl7.org/fhir/ValueSet/condition-stage)

                                  Codes describing condition stages (e.g. Cancer stages).

                                  TypeCodeableConcept
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  162. Condition.stage.assessment
                                  Definition

                                  Reference to a formal record of the evidence on which the staging assessment is based.

                                  ShortFormal record of assessment
                                  Control0..*
                                  This element is affected by the following invariants: con-1
                                  TypeReference(ClinicalImpression, DiagnosticReport, Observation)
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  164. Condition.stage.type
                                  Definition

                                  The kind of staging, such as pathological or clinical staging.

                                  ShortKind of staging
                                  Control0..1
                                  BindingFor example codes, see ConditionStageType
                                  (example to http://hl7.org/fhir/ValueSet/condition-stage-type)

                                  Codes describing the kind of condition staging (e.g. clinical or pathological).

                                  TypeCodeableConcept
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  166. Condition.evidence
                                  Definition

                                  Supporting evidence / manifestations that are the basis of the Condition's verification status, such as evidence that confirmed or refuted the condition.

                                  ShortSupporting evidence for the verification status
                                  Comments

                                  If the condition was confirmed, but subsequently refuted, then the evidence can be cumulative including all evidence over time. The evidence may be a simple list of coded symptoms/manifestations, or references to observations or formal assessments, or both. For example, if the Condition.code is pneumonia, then there could be an evidence list where Condition.evidence.concept = fever (CodeableConcept), Condition.evidence.concept = cough (CodeableConcept), and Condition.evidence.reference = bronchitis (reference to Condition).

                                  Control0..*
                                  BindingFor example codes, see SNOMEDCTClinicalFindings
                                  (example to http://hl7.org/fhir/ValueSet/clinical-findings)
                                  TypeCodeableReference(Resource)
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  168. Condition.note
                                  Definition

                                  Additional information about the Condition. This is a general notes/comments entry for description of the Condition, its diagnosis and prognosis.

                                  ShortAdditional information about the Condition
                                  Control0..*
                                  TypeAnnotation
                                  Is Modifierfalse
                                  Must Supportfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))