Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED)
0.1.0 - ci-build

Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED) - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: MopedVAEResponse - Detailed Descriptions

Draft as of 2025-10-31

Definitions for the MopedVAEResponse resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. ClaimResponse
Definition

This resource provides the adjudication details from the processing of a Claim resource.

ShortResponse to a claim predetermination or preauthorization
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesRemittance Advice
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. ClaimResponse.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. ClaimResponse.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. ClaimResponse.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control30..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ClaimResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. ClaimResponse.extension:MopedSupportingInfoSonderklasse
    Slice NameMopedSupportingInfoSonderklasse
    Definition

    Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues

    ShortKaOrg: Allgemeine Gebührenklasse/Sonderklasse
    Control1..1
    TypeExtension(Supporting Info Extension for ClaimResponse - Sonderklasse Slice) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Obligations
      ObligationsActor
      SHALL:populateMoped SV Actor
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      10. ClaimResponse.extension:VerpflegskostenBeitragsbefreiung
      Slice NameVerpflegskostenBeitragsbefreiung
      Definition

      VKBEFR – Verpflegskosten-Beitragsbefreiung

      ShortKaOrg: Verpflegskosten-Beitragsbefreiung
      Control1..1
      TypeExtension(VerpflegskostenBeitragsbefreiung) (Complex Extension)
      Is Modifierfalse
      Must Supportfalse
      Obligations
        ObligationsActor
        SHALL:populateMoped SV Actor
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        12. ClaimResponse.extension:MopedSupportingInfoVortageanzahlAufKostenbeitrag
        Slice NameMopedSupportingInfoVortageanzahlAufKostenbeitrag
        Definition

        Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues

        ShortKaOrg: Vortageanzahl auf Kostenbeitrag
        Control1..1
        TypeExtension(Supporting Info Extension for ClaimResponse - Vortageanzahl auf Kostenbeitrag) (Complex Extension)
        Is Modifierfalse
        Must Supportfalse
        Obligations
          ObligationsActor
          SHALL:populateMoped SV Actor
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          14. ClaimResponse.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
          Must Supportfalse
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          16. ClaimResponse.status
          Definition

          The status of the resource instance.

          Shortactive | cancelled | draft | entered-in-error
          Comments

          This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

          Control1..1
          BindingThe codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|5.0.0
          (required to http://hl7.org/fhir/ValueSet/fm-status|5.0.0)

          A code specifying the state of the resource instance.

          Typecode
          Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Obligations
            ObligationsActor
            SHALL:populateMoped SV Actor
            SHALL:handleMoped Device Actor
            Summarytrue
            Requirements

            Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

            Pattern Valueactive
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            18. ClaimResponse.type
            Definition

            A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

            ShortMore granular claim type
            Comments

            This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodeshttp://hl7.org/fhir/ValueSet/claim-type|5.0.0
            (extensible to http://hl7.org/fhir/ValueSet/claim-type|5.0.0)

            The type or discipline-style of the claim.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Obligations
              ObligationsActor
              SHALL:populateMoped SV Actor
              Summarytrue
              Requirements

              Some jurisdictions need a finer grained claim type for routing and adjudication.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              20. ClaimResponse.type.coding
              Definition

              A reference to a code defined by a terminology system.

              ShortCode defined by a terminology system
              Comments

              Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

              Control10..*
              TypeCoding
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows for alternative encodings within a code system, and translations to other code systems.

              Pattern Value{
                "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
                "code" : "institutional"
              }
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              22. ClaimResponse.use
              Definition

              A code to indicate whether the nature of the request is: Claim - A request to an Insurer to adjudicate the supplied charges for health care goods and services under the identified policy and to pay the determined Benefit amount, if any; Preauthorization - A request to an Insurer to adjudicate the supplied proposed future charges for health care goods and services under the identified policy and to approve the services and provide the expected benefit amounts and potentially to reserve funds to pay the benefits when Claims for the indicated services are later submitted; or, Pre-determination - A request to an Insurer to adjudicate the supplied 'what if' charges for health care goods and services under the identified policy and report back what the Benefit payable would be had the services actually been provided.

              Shortclaim | preauthorization | predetermination
              Control1..1
              BindingThe codes SHALL be taken from Usehttp://hl7.org/fhir/ValueSet/claim-use|5.0.0
              (required to http://hl7.org/fhir/ValueSet/claim-use|5.0.0)

              Claim, preauthorization, predetermination.

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Obligations
                ObligationsActor
                SHALL:populateMoped SV Actor
                Summarytrue
                Requirements

                This element is required to understand the nature of the request for adjudication.

                Pattern Valuepreauthorization
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                24. ClaimResponse.patient
                Definition

                The party to whom the professional services and/or products have been supplied or are being considered and for whom actual for facast reimbursement is sought.

                ShortThe recipient of the products and services
                Control1..1
                TypeReference(HL7® AT Core Patient Profile, Patient)
                Is Modifierfalse
                Must Supportfalse
                Obligations
                  ObligationsActor
                  SHALL:handleMoped Device Actor
                  Summarytrue
                  Requirements

                  The patient must be supplied to the insurer so that confirmation of coverage and service hstory may be considered as part of the authorization and/or adjudiction.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  26. ClaimResponse.created
                  Definition

                  The date this resource was created.

                  ShortResponse creation date
                  Control1..1
                  TypedateTime
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  Need to record a timestamp for use by both the recipient and the issuer.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  28. ClaimResponse.insurer
                  Definition

                  The party responsible for authorization, adjudication and reimbursement.

                  ShortParty responsible for reimbursement
                  Control10..1
                  TypeReference(SV Organization, Organization)
                  Is Modifierfalse
                  Must Supportfalse
                  Obligations
                    ObligationsActor
                    SHALL:populateMoped SV Actor
                    Summarytrue
                    Requirements

                    To be a valid claim, preauthorization or predetermination there must be a party who is responsible for adjudicating the contents against a policy which provides benefits for the patient.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    30. ClaimResponse.requestor
                    Definition

                    The provider which is responsible for the claim, predetermination or preauthorization.

                    ShortParty responsible for the claim
                    Comments

                    Typically this field would be 1..1 where this party is accountable for the data content within the claim but is not necessarily the facility, provider group or practitioner who provided the products and services listed within this claim resource. This field is the Billing Provider, for example, a facility, provider group, lab or practitioner..

                    Control10..1
                    TypeReference(KH Organization, Practitioner, PractitionerRole, Organization)
                    Is Modifierfalse
                    Must Supportfalse
                    Obligations
                      ObligationsActor
                      SHALL:handleMoped Device Actor
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      32. ClaimResponse.request
                      Definition

                      Original request resource reference.

                      ShortId of resource triggering adjudication
                      Control10..1
                      TypeReference(MOPED VAERequest, Claim)
                      Is Modifierfalse
                      Must Supportfalse
                      Obligations
                        ObligationsActor
                        SHALL:populateMoped SV Actor
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        34. ClaimResponse.outcome
                        Definition

                        The outcome of the claim, predetermination, or preauthorization processing.

                        ShortVAE Bewilligung/Ablehnungqueued | complete | error | partial
                        Comments

                        The resource may be used to indicate that the Claim/Preauthorization/Pre-determination has been received but processing has not begun (queued); that it has been processed and one or more errors have been detected (error); no errors were detected and some of the adjudication processing has been performed (partial); or all of the adjudication processing has completed without errors (complete).

                        Control1..1
                        BindingThe codes SHALL be taken from ClaimProcessingCodeshttp://hl7.org/fhir/ValueSet/claim-outcome|5.0.0
                        (required to http://hl7.org/fhir/ValueSet/claim-outcome|5.0.0)

                        The result of the claim processing.

                        Typecode
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supportfalse
                        Obligations
                          ObligationsActor
                          SHALL:populateMoped SV Actor
                          Summarytrue
                          Requirements

                          To advise the requestor of an overall processing outcome.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          36. ClaimResponse.decision
                          Definition

                          "VAEST - Status der Versichertenanspruchserklärung"


                          The result of the claim, predetermination, or preauthorization adjudication.

                          ShortKaOrg: Status der VAEResult of the adjudication
                          Comments

                          The element is used to indicate the current state of the adjudication overall for the claim resource, for example: the request has been held (pended) for adjudication processing, for manual review or other reasons; that it has been processed and will be paid, or the outstanding paid, as submitted (approved); that no amount will be paid (denied); or that some amount between zero and the submitted amount will be paid (partial).

                          Control10..1
                          BindingThe codes SHALL be taken from For example codes, see Status der Versichertenanspruchserklärunghttp://hl7.org/fhir/ValueSet/claim-decision|5.0.0
                          (required to https://elga.moped.at/ValueSet/VAEStatusVS)
                          TypeCodeableConcept
                          Is Modifierfalse
                          Must Supportfalse
                          Obligations
                            ObligationsActor
                            SHALL:populateMoped SV Actor
                            Summarytrue
                            Requirements

                            To advise the requestor of the result of the adjudication process.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            38. ClaimResponse.preAuthPeriod
                            Definition

                            Ist diese Zeitspanne angegeben so gibt es ein Fristende. Befristungen sind in folgenden Fällen vorgesehen:

                            • Bei zeitlichen Beschränkungen aufgrund einer zu erwartenden, nachfolgenden medizini- schen Hauskrankenpflege
                            • Bei Vorhersehbarkeit des Eintritts einer Asylierung
                            • Bei unsicherer, versicherungsrechtlicher Entwicklung Bei den ersten beiden Punkten wird von den Krankenversicherungsträgern das Fristende individuell gesetzt. Beim dritten Punkt wird im Regelfall eine generelle Tagesbeschränkung erfolgen, weil die Versichertenanspruchserklärung in die Zukunft gerichtet ist und der Krankenversicherungsträger seine Zuständigkeit von vornherein nur für einen bestimmten Zeitraum annehmen kann (Ausleis- tungssituation gem. § 122 ASVG). Durch die Angabe eines Fristendes wird signalisiert, dass bei einem über das Fristende hinaus dau- ernden Aufenthalt eine Verlängerungsanzeige vorzulegen ist.

                            The time frame during which this authorization is effective.

                            ShortPreauthorization reference effective period
                            Control10..1
                            TypePeriod
                            Is Modifierfalse
                            Must Supportfalse
                            Obligations
                              ObligationsActor
                              SHALL:populateMoped SV Actor
                              Summaryfalse
                              Requirements

                              To convey to the provider when the authorized products and services must be supplied for the authorized adjudication to apply.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              40. ClaimResponse.preAuthPeriod.start
                              Definition

                              The start of the period. The boundary is inclusive.

                              ShortKaOrg: VAE BeginndatumStarting time with inclusive boundary
                              Comments

                              If the low element is missing, the meaning is that the low boundary is not known.

                              Control10..1
                              This element is affected by the following invariants: per-1
                              TypedateTime
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              42. ClaimResponse.preAuthPeriod.end
                              Definition

                              The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

                              ShortKaOrg: Fristende + VAE Endedatum; VAE Enddatum und Indikator, ob es ein Fristende gibtEnd time with inclusive boundary, if not ongoing
                              Comments

                              The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

                              Control0..1
                              This element is affected by the following invariants: per-1
                              TypedateTime
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                              Guidance on how to interpret the contents of this table can be foundhere

                              0. ClaimResponse
                              2. ClaimResponse.extension
                              Control3..?
                              SlicingThis element introduces a set of slices on ClaimResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 4. ClaimResponse.extension:MopedSupportingInfoSonderklasse
                                Slice NameMopedSupportingInfoSonderklasse
                                ShortKaOrg: Allgemeine Gebührenklasse/Sonderklasse
                                Control1..1
                                TypeExtension(Supporting Info Extension for ClaimResponse - Sonderklasse Slice) (Complex Extension)
                                Obligations
                                  ObligationsActor
                                  SHALL:populateMoped SV Actor
                                  6. ClaimResponse.extension:VerpflegskostenBeitragsbefreiung
                                  Slice NameVerpflegskostenBeitragsbefreiung
                                  ShortKaOrg: Verpflegskosten-Beitragsbefreiung
                                  Control1..1
                                  TypeExtension(VerpflegskostenBeitragsbefreiung) (Complex Extension)
                                  Obligations
                                    ObligationsActor
                                    SHALL:populateMoped SV Actor
                                    8. ClaimResponse.extension:MopedSupportingInfoVortageanzahlAufKostenbeitrag
                                    Slice NameMopedSupportingInfoVortageanzahlAufKostenbeitrag
                                    ShortKaOrg: Vortageanzahl auf Kostenbeitrag
                                    Control1..1
                                    TypeExtension(Supporting Info Extension for ClaimResponse - Vortageanzahl auf Kostenbeitrag) (Complex Extension)
                                    Obligations
                                      ObligationsActor
                                      SHALL:populateMoped SV Actor
                                      10. ClaimResponse.status
                                      Obligations
                                        ObligationsActor
                                        SHALL:populateMoped SV Actor
                                        SHALL:handleMoped Device Actor
                                        Pattern Valueactive
                                        12. ClaimResponse.type
                                        Obligations
                                          ObligationsActor
                                          SHALL:populateMoped SV Actor
                                          14. ClaimResponse.type.coding
                                          Control1..?
                                          Pattern Value{
                                            "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
                                            "code" : "institutional"
                                          }
                                          16. ClaimResponse.use
                                          Obligations
                                            ObligationsActor
                                            SHALL:populateMoped SV Actor
                                            Pattern Valuepreauthorization
                                            18. ClaimResponse.patient
                                            TypeReference(HL7® AT Core Patient Profile)
                                            Obligations
                                              ObligationsActor
                                              SHALL:handleMoped Device Actor
                                              20. ClaimResponse.insurer
                                              Control1..?
                                              TypeReference(SV Organization)
                                              Obligations
                                                ObligationsActor
                                                SHALL:populateMoped SV Actor
                                                22. ClaimResponse.requestor
                                                Control1..?
                                                TypeReference(KH Organization)
                                                Obligations
                                                  ObligationsActor
                                                  SHALL:handleMoped Device Actor
                                                  24. ClaimResponse.request
                                                  Control1..?
                                                  TypeReference(MOPED VAERequest)
                                                  Obligations
                                                    ObligationsActor
                                                    SHALL:populateMoped SV Actor
                                                    26. ClaimResponse.outcome
                                                    ShortVAE Bewilligung/Ablehnung
                                                    Obligations
                                                      ObligationsActor
                                                      SHALL:populateMoped SV Actor
                                                      28. ClaimResponse.decision
                                                      Definition

                                                      "VAEST - Status der Versichertenanspruchserklärung"

                                                      ShortKaOrg: Status der VAE
                                                      Control1..?
                                                      BindingThe codes SHALL be taken from Status der Versichertenanspruchserklärung
                                                      (required to https://elga.moped.at/ValueSet/VAEStatusVS)
                                                      Obligations
                                                        ObligationsActor
                                                        SHALL:populateMoped SV Actor
                                                        30. ClaimResponse.preAuthPeriod
                                                        Definition

                                                        Ist diese Zeitspanne angegeben so gibt es ein Fristende. Befristungen sind in folgenden Fällen vorgesehen:

                                                        • Bei zeitlichen Beschränkungen aufgrund einer zu erwartenden, nachfolgenden medizini- schen Hauskrankenpflege
                                                        • Bei Vorhersehbarkeit des Eintritts einer Asylierung
                                                        • Bei unsicherer, versicherungsrechtlicher Entwicklung Bei den ersten beiden Punkten wird von den Krankenversicherungsträgern das Fristende individuell gesetzt. Beim dritten Punkt wird im Regelfall eine generelle Tagesbeschränkung erfolgen, weil die Versichertenanspruchserklärung in die Zukunft gerichtet ist und der Krankenversicherungsträger seine Zuständigkeit von vornherein nur für einen bestimmten Zeitraum annehmen kann (Ausleis- tungssituation gem. § 122 ASVG). Durch die Angabe eines Fristendes wird signalisiert, dass bei einem über das Fristende hinaus dau- ernden Aufenthalt eine Verlängerungsanzeige vorzulegen ist.
                                                        Control1..?
                                                        Obligations
                                                          ObligationsActor
                                                          SHALL:populateMoped SV Actor
                                                          32. ClaimResponse.preAuthPeriod.start
                                                          ShortKaOrg: VAE Beginndatum
                                                          Control1..?
                                                          34. ClaimResponse.preAuthPeriod.end
                                                          ShortKaOrg: Fristende + VAE Endedatum; VAE Enddatum und Indikator, ob es ein Fristende gibt
                                                          36. ClaimResponse.addItem
                                                          38. ClaimResponse.addItem.extension
                                                          SlicingThis element introduces a set of slices on ClaimResponse.addItem.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                          • value @ url
                                                          • 40. ClaimResponse.addItem.extension:AddItemCategory
                                                            Slice NameAddItemCategory
                                                            Control0..1
                                                            TypeExtension(AddItemCategory) (Extension Type: CodeableConcept)
                                                            Obligations
                                                              ObligationsActor
                                                              SHALL:populateMoped SV Actor

                                                              Guidance on how to interpret the contents of this table can be foundhere

                                                              0. ClaimResponse
                                                              Definition

                                                              This resource provides the adjudication details from the processing of a Claim resource.

                                                              ShortResponse to a claim predetermination or preauthorization
                                                              Control0..*
                                                              Is Modifierfalse
                                                              Must Supportfalse
                                                              Summaryfalse
                                                              Alternate NamesRemittance Advice
                                                              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                                                              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                                                              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                                                              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                                                              dom-6: A resource should have narrative for robust management (text.`div`.exists())
                                                              2. ClaimResponse.id
                                                              Definition

                                                              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                                                              ShortLogical id of this artifact
                                                              Comments

                                                              Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

                                                              Control0..1
                                                              Typeid
                                                              Is Modifierfalse
                                                              Must Supportfalse
                                                              Summarytrue
                                                              4. ClaimResponse.meta
                                                              Definition

                                                              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                                                              ShortMetadata about the resource
                                                              Control0..1
                                                              TypeMeta
                                                              Is Modifierfalse
                                                              Must Supportfalse
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              6. ClaimResponse.implicitRules
                                                              Definition

                                                              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                                                              ShortA set of rules under which this content was created
                                                              Comments

                                                              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

                                                              Control0..1
                                                              Typeuri
                                                              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Must Supportfalse
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              8. ClaimResponse.language
                                                              Definition

                                                              The base language in which the resource is written.

                                                              ShortLanguage of the resource content
                                                              Comments

                                                              Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                                                              Control0..1
                                                              BindingThe codes SHALL be taken from AllLanguages
                                                              (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

                                                              IETF language tag for a human language

                                                              Typecode
                                                              Is Modifierfalse
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Must Supportfalse
                                                              Summaryfalse
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              10. ClaimResponse.text
                                                              Definition

                                                              A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                                                              ShortText summary of the resource, for human interpretation
                                                              Comments

                                                              Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                                                              Control0..1
                                                              This element is affected by the following invariants: dom-6
                                                              TypeNarrative
                                                              Is Modifierfalse
                                                              Must Supportfalse
                                                              Summaryfalse
                                                              Alternate Namesnarrative, html, xhtml, display
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              12. ClaimResponse.contained
                                                              Definition

                                                              These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

                                                              ShortContained, inline Resources
                                                              Comments

                                                              This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

                                                              Control0..*
                                                              This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
                                                              TypeResource
                                                              Is Modifierfalse
                                                              Must Supportfalse
                                                              Summaryfalse
                                                              Alternate Namesinline resources, anonymous resources, contained resources
                                                              14. ClaimResponse.extension
                                                              Definition

                                                              An Extension

                                                              ShortExtension
                                                              Control3..*
                                                              TypeExtension
                                                              Is Modifierfalse
                                                              Must Supportfalse
                                                              Summaryfalse
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                              SlicingThis element introduces a set of slices on ClaimResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                              • value @ url
                                                              • 16. ClaimResponse.extension:MopedSupportingInfoSonderklasse
                                                                Slice NameMopedSupportingInfoSonderklasse
                                                                Definition

                                                                Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues

                                                                ShortKaOrg: Allgemeine Gebührenklasse/Sonderklasse
                                                                Control1..1
                                                                TypeExtension(Supporting Info Extension for ClaimResponse - Sonderklasse Slice) (Complex Extension)
                                                                Is Modifierfalse
                                                                Must Supportfalse
                                                                Obligations
                                                                  ObligationsActor
                                                                  SHALL:populateMoped SV Actor
                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                  18. ClaimResponse.extension:VerpflegskostenBeitragsbefreiung
                                                                  Slice NameVerpflegskostenBeitragsbefreiung
                                                                  Definition

                                                                  VKBEFR – Verpflegskosten-Beitragsbefreiung

                                                                  ShortKaOrg: Verpflegskosten-Beitragsbefreiung
                                                                  Control1..1
                                                                  TypeExtension(VerpflegskostenBeitragsbefreiung) (Complex Extension)
                                                                  Is Modifierfalse
                                                                  Must Supportfalse
                                                                  Obligations
                                                                    ObligationsActor
                                                                    SHALL:populateMoped SV Actor
                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                    20. ClaimResponse.extension:MopedSupportingInfoVortageanzahlAufKostenbeitrag
                                                                    Slice NameMopedSupportingInfoVortageanzahlAufKostenbeitrag
                                                                    Definition

                                                                    Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues

                                                                    ShortKaOrg: Vortageanzahl auf Kostenbeitrag
                                                                    Control1..1
                                                                    TypeExtension(Supporting Info Extension for ClaimResponse - Vortageanzahl auf Kostenbeitrag) (Complex Extension)
                                                                    Is Modifierfalse
                                                                    Must Supportfalse
                                                                    Obligations
                                                                      ObligationsActor
                                                                      SHALL:populateMoped SV Actor
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      22. ClaimResponse.modifierExtension
                                                                      Definition

                                                                      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                      ShortExtensions that cannot be ignored
                                                                      Comments

                                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                      Control0..*
                                                                      TypeExtension
                                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                                                                      Must Supportfalse
                                                                      Summarytrue
                                                                      Requirements

                                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                      Alternate Namesextensions, user content
                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                      24. ClaimResponse.identifier
                                                                      Definition

                                                                      A unique identifier assigned to this claim response.

                                                                      ShortBusiness Identifier for a claim response
                                                                      NoteThis is a business identifier, not a resource identifier (see discussion)
                                                                      Control0..*
                                                                      TypeIdentifier
                                                                      Is Modifierfalse
                                                                      Must Supportfalse
                                                                      Summaryfalse
                                                                      Requirements

                                                                      Allows claim responses to be distinguished and referenced.

                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      26. ClaimResponse.traceNumber
                                                                      Definition

                                                                      Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                                                                      ShortNumber for tracking
                                                                      Control0..*
                                                                      TypeIdentifier
                                                                      Is Modifierfalse
                                                                      Must Supportfalse
                                                                      Summaryfalse
                                                                      Requirements

                                                                      Allows partners to uniquely identify components for tracking.

                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                      28. ClaimResponse.status
                                                                      Definition

                                                                      The status of the resource instance.

                                                                      Shortactive | cancelled | draft | entered-in-error
                                                                      Comments

                                                                      This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

                                                                      Control1..1
                                                                      BindingThe codes SHALL be taken from FinancialResourceStatusCodes
                                                                      (required to http://hl7.org/fhir/ValueSet/fm-status|5.0.0)

                                                                      A code specifying the state of the resource instance.

                                                                      Typecode
                                                                      Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                      Must Supportfalse
                                                                      Obligations
                                                                        ObligationsActor
                                                                        SHALL:populateMoped SV Actor
                                                                        SHALL:handleMoped Device Actor
                                                                        Summarytrue
                                                                        Requirements

                                                                        Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

                                                                        Pattern Valueactive
                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                        30. ClaimResponse.type
                                                                        Definition

                                                                        A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

                                                                        ShortMore granular claim type
                                                                        Comments

                                                                        This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

                                                                        Control1..1
                                                                        BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodes
                                                                        (extensible to http://hl7.org/fhir/ValueSet/claim-type|5.0.0)

                                                                        The type or discipline-style of the claim.

                                                                        TypeCodeableConcept
                                                                        Is Modifierfalse
                                                                        Must Supportfalse
                                                                        Obligations
                                                                          ObligationsActor
                                                                          SHALL:populateMoped SV Actor
                                                                          Summarytrue
                                                                          Requirements

                                                                          Some jurisdictions need a finer grained claim type for routing and adjudication.

                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          32. ClaimResponse.type.id
                                                                          Definition

                                                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                          ShortUnique id for inter-element referencing
                                                                          Control0..1
                                                                          This element is affected by the following invariants: ele-1
                                                                          Typeid
                                                                          Is Modifierfalse
                                                                          XML FormatIn the XML format, this property is represented as an attribute.
                                                                          Summaryfalse
                                                                          34. ClaimResponse.type.extension
                                                                          Definition

                                                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                          ShortAdditional content defined by implementations
                                                                          Comments

                                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                          Control0..*
                                                                          TypeExtension
                                                                          Is Modifierfalse
                                                                          Summaryfalse
                                                                          Alternate Namesextensions, user content
                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                          SlicingThis element introduces a set of slices on ClaimResponse.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                          • value @ url
                                                                          • 36. ClaimResponse.type.coding
                                                                            Definition

                                                                            A reference to a code defined by a terminology system.

                                                                            ShortCode defined by a terminology system
                                                                            Comments

                                                                            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                                                            Control1..*
                                                                            TypeCoding
                                                                            Is Modifierfalse
                                                                            Summarytrue
                                                                            Requirements

                                                                            Allows for alternative encodings within a code system, and translations to other code systems.

                                                                            Pattern Value{
                                                                              "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
                                                                              "code" : "institutional"
                                                                            }
                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            38. ClaimResponse.type.text
                                                                            Definition

                                                                            A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                                                            ShortPlain text representation of the concept
                                                                            Comments

                                                                            Very often the text is the same as a displayName of one of the codings.

                                                                            Control0..1
                                                                            Typestring
                                                                            Is Modifierfalse
                                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                            Summarytrue
                                                                            Requirements

                                                                            The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            40. ClaimResponse.subType
                                                                            Definition

                                                                            A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

                                                                            ShortMore granular claim type
                                                                            Comments

                                                                            This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

                                                                            Control0..1
                                                                            BindingFor example codes, see ExampleClaimSubTypeCodes
                                                                            (example to http://hl7.org/fhir/ValueSet/claim-subtype|5.0.0)

                                                                            A more granular claim typecode.

                                                                            TypeCodeableConcept
                                                                            Is Modifierfalse
                                                                            Must Supportfalse
                                                                            Summaryfalse
                                                                            Requirements

                                                                            Some jurisdictions need a finer grained claim type for routing and adjudication.

                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                            42. ClaimResponse.use
                                                                            Definition

                                                                            A code to indicate whether the nature of the request is: Claim - A request to an Insurer to adjudicate the supplied charges for health care goods and services under the identified policy and to pay the determined Benefit amount, if any; Preauthorization - A request to an Insurer to adjudicate the supplied proposed future charges for health care goods and services under the identified policy and to approve the services and provide the expected benefit amounts and potentially to reserve funds to pay the benefits when Claims for the indicated services are later submitted; or, Pre-determination - A request to an Insurer to adjudicate the supplied 'what if' charges for health care goods and services under the identified policy and report back what the Benefit payable would be had the services actually been provided.

                                                                            Shortclaim | preauthorization | predetermination
                                                                            Control1..1
                                                                            BindingThe codes SHALL be taken from Use
                                                                            (required to http://hl7.org/fhir/ValueSet/claim-use|5.0.0)

                                                                            Claim, preauthorization, predetermination.

                                                                            Typecode
                                                                            Is Modifierfalse
                                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                            Must Supportfalse
                                                                            Obligations
                                                                              ObligationsActor
                                                                              SHALL:populateMoped SV Actor
                                                                              Summarytrue
                                                                              Requirements

                                                                              This element is required to understand the nature of the request for adjudication.

                                                                              Pattern Valuepreauthorization
                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                              44. ClaimResponse.patient
                                                                              Definition

                                                                              The party to whom the professional services and/or products have been supplied or are being considered and for whom actual for facast reimbursement is sought.

                                                                              ShortThe recipient of the products and services
                                                                              Control1..1
                                                                              TypeReference(HL7® AT Core Patient Profile)
                                                                              Is Modifierfalse
                                                                              Must Supportfalse
                                                                              Obligations
                                                                                ObligationsActor
                                                                                SHALL:handleMoped Device Actor
                                                                                Summarytrue
                                                                                Requirements

                                                                                The patient must be supplied to the insurer so that confirmation of coverage and service hstory may be considered as part of the authorization and/or adjudiction.

                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                46. ClaimResponse.created
                                                                                Definition

                                                                                The date this resource was created.

                                                                                ShortResponse creation date
                                                                                Control1..1
                                                                                TypedateTime
                                                                                Is Modifierfalse
                                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                Must Supportfalse
                                                                                Summarytrue
                                                                                Requirements

                                                                                Need to record a timestamp for use by both the recipient and the issuer.

                                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                48. ClaimResponse.insurer
                                                                                Definition

                                                                                The party responsible for authorization, adjudication and reimbursement.

                                                                                ShortParty responsible for reimbursement
                                                                                Control1..1
                                                                                TypeReference(SV Organization)
                                                                                Is Modifierfalse
                                                                                Must Supportfalse
                                                                                Obligations
                                                                                  ObligationsActor
                                                                                  SHALL:populateMoped SV Actor
                                                                                  Summarytrue
                                                                                  Requirements

                                                                                  To be a valid claim, preauthorization or predetermination there must be a party who is responsible for adjudicating the contents against a policy which provides benefits for the patient.

                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                  50. ClaimResponse.requestor
                                                                                  Definition

                                                                                  The provider which is responsible for the claim, predetermination or preauthorization.

                                                                                  ShortParty responsible for the claim
                                                                                  Comments

                                                                                  Typically this field would be 1..1 where this party is accountable for the data content within the claim but is not necessarily the facility, provider group or practitioner who provided the products and services listed within this claim resource. This field is the Billing Provider, for example, a facility, provider group, lab or practitioner..

                                                                                  Control1..1
                                                                                  TypeReference(KH Organization)
                                                                                  Is Modifierfalse
                                                                                  Must Supportfalse
                                                                                  Obligations
                                                                                    ObligationsActor
                                                                                    SHALL:handleMoped Device Actor
                                                                                    Summaryfalse
                                                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                    52. ClaimResponse.request
                                                                                    Definition

                                                                                    Original request resource reference.

                                                                                    ShortId of resource triggering adjudication
                                                                                    Control1..1
                                                                                    TypeReference(MOPED VAERequest)
                                                                                    Is Modifierfalse
                                                                                    Must Supportfalse
                                                                                    Obligations
                                                                                      ObligationsActor
                                                                                      SHALL:populateMoped SV Actor
                                                                                      Summarytrue
                                                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                      54. ClaimResponse.outcome
                                                                                      Definition

                                                                                      The outcome of the claim, predetermination, or preauthorization processing.

                                                                                      ShortVAE Bewilligung/Ablehnung
                                                                                      Comments

                                                                                      The resource may be used to indicate that the Claim/Preauthorization/Pre-determination has been received but processing has not begun (queued); that it has been processed and one or more errors have been detected (error); no errors were detected and some of the adjudication processing has been performed (partial); or all of the adjudication processing has completed without errors (complete).

                                                                                      Control1..1
                                                                                      BindingThe codes SHALL be taken from ClaimProcessingCodes
                                                                                      (required to http://hl7.org/fhir/ValueSet/claim-outcome|5.0.0)

                                                                                      The result of the claim processing.

                                                                                      Typecode
                                                                                      Is Modifierfalse
                                                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                      Must Supportfalse
                                                                                      Obligations
                                                                                        ObligationsActor
                                                                                        SHALL:populateMoped SV Actor
                                                                                        Summarytrue
                                                                                        Requirements

                                                                                        To advise the requestor of an overall processing outcome.

                                                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                        56. ClaimResponse.decision
                                                                                        Definition

                                                                                        "VAEST - Status der Versichertenanspruchserklärung"

                                                                                        ShortKaOrg: Status der VAE
                                                                                        Comments

                                                                                        The element is used to indicate the current state of the adjudication overall for the claim resource, for example: the request has been held (pended) for adjudication processing, for manual review or other reasons; that it has been processed and will be paid, or the outstanding paid, as submitted (approved); that no amount will be paid (denied); or that some amount between zero and the submitted amount will be paid (partial).

                                                                                        Control1..1
                                                                                        BindingThe codes SHALL be taken from Status der Versichertenanspruchserklärung
                                                                                        (required to https://elga.moped.at/ValueSet/VAEStatusVS)
                                                                                        TypeCodeableConcept
                                                                                        Is Modifierfalse
                                                                                        Must Supportfalse
                                                                                        Obligations
                                                                                          ObligationsActor
                                                                                          SHALL:populateMoped SV Actor
                                                                                          Summarytrue
                                                                                          Requirements

                                                                                          To advise the requestor of the result of the adjudication process.

                                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                          58. ClaimResponse.disposition
                                                                                          Definition

                                                                                          A human readable description of the status of the adjudication.

                                                                                          ShortDisposition Message
                                                                                          Control0..1
                                                                                          Typestring
                                                                                          Is Modifierfalse
                                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                          Must Supportfalse
                                                                                          Summaryfalse
                                                                                          Requirements

                                                                                          Provided for user display.

                                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                          60. ClaimResponse.preAuthRef
                                                                                          Definition

                                                                                          Reference from the Insurer which is used in later communications which refers to this adjudication.

                                                                                          ShortPreauthorization reference
                                                                                          Comments

                                                                                          This value is only present on preauthorization adjudications.

                                                                                          Control0..1
                                                                                          Typestring
                                                                                          Is Modifierfalse
                                                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                          Must Supportfalse
                                                                                          Summaryfalse
                                                                                          Requirements

                                                                                          On subsequent claims, the insurer may require the provider to quote this value.

                                                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                          62. ClaimResponse.preAuthPeriod
                                                                                          Definition

                                                                                          Ist diese Zeitspanne angegeben so gibt es ein Fristende. Befristungen sind in folgenden Fällen vorgesehen:

                                                                                          • Bei zeitlichen Beschränkungen aufgrund einer zu erwartenden, nachfolgenden medizini- schen Hauskrankenpflege
                                                                                          • Bei Vorhersehbarkeit des Eintritts einer Asylierung
                                                                                          • Bei unsicherer, versicherungsrechtlicher Entwicklung Bei den ersten beiden Punkten wird von den Krankenversicherungsträgern das Fristende individuell gesetzt. Beim dritten Punkt wird im Regelfall eine generelle Tagesbeschränkung erfolgen, weil die Versichertenanspruchserklärung in die Zukunft gerichtet ist und der Krankenversicherungsträger seine Zuständigkeit von vornherein nur für einen bestimmten Zeitraum annehmen kann (Ausleis- tungssituation gem. § 122 ASVG). Durch die Angabe eines Fristendes wird signalisiert, dass bei einem über das Fristende hinaus dau- ernden Aufenthalt eine Verlängerungsanzeige vorzulegen ist.
                                                                                          ShortPreauthorization reference effective period
                                                                                          Control1..1
                                                                                          TypePeriod
                                                                                          Is Modifierfalse
                                                                                          Must Supportfalse
                                                                                          Obligations
                                                                                            ObligationsActor
                                                                                            SHALL:populateMoped SV Actor
                                                                                            Summaryfalse
                                                                                            Requirements

                                                                                            To convey to the provider when the authorized products and services must be supplied for the authorized adjudication to apply.

                                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                            64. ClaimResponse.preAuthPeriod.id
                                                                                            Definition

                                                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                            ShortUnique id for inter-element referencing
                                                                                            Control0..1
                                                                                            This element is affected by the following invariants: ele-1
                                                                                            Typeid
                                                                                            Is Modifierfalse
                                                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                                                            Summaryfalse
                                                                                            66. ClaimResponse.preAuthPeriod.extension
                                                                                            Definition

                                                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                            ShortAdditional content defined by implementations
                                                                                            Comments

                                                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                            Control0..*
                                                                                            TypeExtension
                                                                                            Is Modifierfalse
                                                                                            Summaryfalse
                                                                                            Alternate Namesextensions, user content
                                                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                            SlicingThis element introduces a set of slices on ClaimResponse.preAuthPeriod.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                                            • value @ url
                                                                                            • 68. ClaimResponse.preAuthPeriod.start
                                                                                              Definition

                                                                                              The start of the period. The boundary is inclusive.

                                                                                              ShortKaOrg: VAE Beginndatum
                                                                                              Comments

                                                                                              If the low element is missing, the meaning is that the low boundary is not known.

                                                                                              Control1..1
                                                                                              This element is affected by the following invariants: per-1
                                                                                              TypedateTime
                                                                                              Is Modifierfalse
                                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                              Summarytrue
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              70. ClaimResponse.preAuthPeriod.end
                                                                                              Definition

                                                                                              The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

                                                                                              ShortKaOrg: Fristende + VAE Endedatum; VAE Enddatum und Indikator, ob es ein Fristende gibt
                                                                                              Comments

                                                                                              The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

                                                                                              Control0..1
                                                                                              This element is affected by the following invariants: per-1
                                                                                              TypedateTime
                                                                                              Is Modifierfalse
                                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                              Summarytrue
                                                                                              Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              72. ClaimResponse.event
                                                                                              Definition

                                                                                              Information code for an event with a corresponding date or period.

                                                                                              ShortEvent information
                                                                                              Control0..*
                                                                                              TypeBackboneElement
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              74. ClaimResponse.event.id
                                                                                              Definition

                                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                              ShortUnique id for inter-element referencing
                                                                                              Control0..1
                                                                                              This element is affected by the following invariants: ele-1
                                                                                              Typestring
                                                                                              Is Modifierfalse
                                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                                              Summaryfalse
                                                                                              76. ClaimResponse.event.extension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                              ShortAdditional content defined by implementations
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifierfalse
                                                                                              Summaryfalse
                                                                                              Alternate Namesextensions, user content
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              78. ClaimResponse.event.modifierExtension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                              Summarytrue
                                                                                              Requirements

                                                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                              Alternate Namesextensions, user content, modifiers
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              80. ClaimResponse.event.type
                                                                                              Definition

                                                                                              A coded event such as when a service is expected or a card printed.

                                                                                              ShortSpecific event
                                                                                              Control1..1
                                                                                              BindingFor example codes, see DatesTypeCodes
                                                                                              (example to http://hl7.org/fhir/ValueSet/datestype|5.0.0)
                                                                                              TypeCodeableConcept
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              82. ClaimResponse.event.when[x]
                                                                                              Definition

                                                                                              A date or period in the past or future indicating when the event occurred or is expectd to occur.

                                                                                              ShortOccurance date or period
                                                                                              Control1..1
                                                                                              TypeChoice of: dateTime, Period
                                                                                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                              Is Modifierfalse
                                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              84. ClaimResponse.payeeType
                                                                                              Definition

                                                                                              Type of Party to be reimbursed: subscriber, provider, other.

                                                                                              ShortParty to be paid any benefits payable
                                                                                              Control0..1
                                                                                              BindingFor example codes, see ClaimPayeeTypeCodes
                                                                                              (example to http://hl7.org/fhir/ValueSet/payeetype|5.0.0)

                                                                                              A code for the party to be reimbursed.

                                                                                              TypeCodeableConcept
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Need to know who should receive payment with the most common situations being the Provider (assignment of benefits) or the Subscriber.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              86. ClaimResponse.encounter
                                                                                              Definition

                                                                                              Healthcare encounters related to this claim.

                                                                                              ShortEncounters associated with the listed treatments
                                                                                              Comments

                                                                                              This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

                                                                                              Control0..*
                                                                                              TypeReference(Encounter)
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Used in some jurisdictions to link clinical events to claim items.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              88. ClaimResponse.diagnosisRelatedGroup
                                                                                              Definition

                                                                                              A package billing code or bundle code used to group products and services to a particular health condition (such as heart attack) which is based on a predetermined grouping code system.

                                                                                              ShortPackage billing code
                                                                                              Comments

                                                                                              For example DRG (Diagnosis Related Group) or a bundled billing code. A patient may have a diagnosis of a Myocardial Infarction and a DRG for HeartAttack would be assigned. The Claim item (and possible subsequent claims) would refer to the DRG for those line items that were for services related to the heart attack event.

                                                                                              Control0..1
                                                                                              BindingFor example codes, see ExampleDiagnosisRelatedGroupCodes
                                                                                              (example to http://hl7.org/fhir/ValueSet/ex-diagnosisrelatedgroup|5.0.0)
                                                                                              TypeCodeableConcept
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Required to relate the current diagnosis to a package billing code that is then referenced on the individual claim items which are specific to the health condition covered by the package code.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              90. ClaimResponse.item
                                                                                              Definition

                                                                                              A claim line. Either a simple (a product or service) or a 'group' of details which can also be a simple items or groups of sub-details.

                                                                                              ShortAdjudication for claim line items
                                                                                              Control0..*
                                                                                              TypeBackboneElement
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              The adjudication for items provided on the claim.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              92. ClaimResponse.item.id
                                                                                              Definition

                                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                              ShortUnique id for inter-element referencing
                                                                                              Control0..1
                                                                                              This element is affected by the following invariants: ele-1
                                                                                              Typestring
                                                                                              Is Modifierfalse
                                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                                              Summaryfalse
                                                                                              94. ClaimResponse.item.extension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                              ShortAdditional content defined by implementations
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifierfalse
                                                                                              Summaryfalse
                                                                                              Alternate Namesextensions, user content
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              96. ClaimResponse.item.modifierExtension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                              Summarytrue
                                                                                              Requirements

                                                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                              Alternate Namesextensions, user content, modifiers
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              98. ClaimResponse.item.itemSequence
                                                                                              Definition

                                                                                              A number to uniquely reference the claim item entries.

                                                                                              ShortClaim item instance identifier
                                                                                              Control1..1
                                                                                              TypepositiveInt
                                                                                              Is Modifierfalse
                                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Necessary to provide a mechanism to link the adjudication result to the submitted claim item.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              100. ClaimResponse.item.traceNumber
                                                                                              Definition

                                                                                              Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                                                                                              ShortNumber for tracking
                                                                                              Control0..*
                                                                                              TypeIdentifier
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Allows partners to uniquely identify components for tracking.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              102. ClaimResponse.item.noteNumber
                                                                                              Definition

                                                                                              The numbers associated with notes below which apply to the adjudication of this item.

                                                                                              ShortApplicable note numbers
                                                                                              Control0..*
                                                                                              TypepositiveInt
                                                                                              Is Modifierfalse
                                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              104. ClaimResponse.item.reviewOutcome
                                                                                              Definition

                                                                                              The high-level results of the adjudication if adjudication has been performed.

                                                                                              ShortAdjudication results
                                                                                              Control0..1
                                                                                              TypeBackboneElement
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              106. ClaimResponse.item.reviewOutcome.id
                                                                                              Definition

                                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                              ShortUnique id for inter-element referencing
                                                                                              Control0..1
                                                                                              This element is affected by the following invariants: ele-1
                                                                                              Typestring
                                                                                              Is Modifierfalse
                                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                                              Summaryfalse
                                                                                              108. ClaimResponse.item.reviewOutcome.extension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                              ShortAdditional content defined by implementations
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifierfalse
                                                                                              Summaryfalse
                                                                                              Alternate Namesextensions, user content
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              110. ClaimResponse.item.reviewOutcome.modifierExtension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                              Summarytrue
                                                                                              Requirements

                                                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                              Alternate Namesextensions, user content, modifiers
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              112. ClaimResponse.item.reviewOutcome.decision
                                                                                              Definition

                                                                                              The result of the claim, predetermination, or preauthorization adjudication.

                                                                                              ShortResult of the adjudication
                                                                                              Comments

                                                                                              The element is used to indicate the current state of the adjudication overall for the claim resource, for example: the request has been held (pended) for adjudication processing, for manual review or other reasons; that it has been processed and will be paid, or the outstanding paid, as submitted (approved); that no amount will be paid (denied); or that some amount between zero and the submitted amount will be paid (partial).

                                                                                              Control0..1
                                                                                              BindingFor example codes, see ClaimAdjudicationDecisionsCodes
                                                                                              (example to http://hl7.org/fhir/ValueSet/claim-decision|5.0.0)
                                                                                              TypeCodeableConcept
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              To advise the requestor of the result of the adjudication process.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              114. ClaimResponse.item.reviewOutcome.reason
                                                                                              Definition

                                                                                              The reasons for the result of the claim, predetermination, or preauthorization adjudication.

                                                                                              ShortReason for result of the adjudication
                                                                                              Control0..*
                                                                                              BindingFor example codes, see ClaimAdjudicationDecisionReasonCodes
                                                                                              (example to http://hl7.org/fhir/ValueSet/claim-decision-reason|5.0.0)
                                                                                              TypeCodeableConcept
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              To advise the requestor of the contributors to the result of the adjudication process.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              116. ClaimResponse.item.reviewOutcome.preAuthRef
                                                                                              Definition

                                                                                              Reference from the Insurer which is used in later communications which refers to this adjudication.

                                                                                              ShortPreauthorization reference
                                                                                              Comments

                                                                                              This value is only present on preauthorization adjudications.

                                                                                              Control0..1
                                                                                              Typestring
                                                                                              Is Modifierfalse
                                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              On subsequent claims, the insurer may require the provider to quote this value.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              118. ClaimResponse.item.reviewOutcome.preAuthPeriod
                                                                                              Definition

                                                                                              The time frame during which this authorization is effective.

                                                                                              ShortPreauthorization reference effective period
                                                                                              Control0..1
                                                                                              TypePeriod
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              To convey to the provider when the authorized products and services must be supplied for the authorized adjudication to apply.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              120. ClaimResponse.item.adjudication
                                                                                              Definition

                                                                                              If this item is a group then the values here are a summary of the adjudication of the detail items. If this item is a simple product or service then this is the result of the adjudication of this item.

                                                                                              ShortAdjudication details
                                                                                              Control0..*
                                                                                              TypeBackboneElement
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              The adjudication results conveys the insurer's assessment of the item provided in the claim under the terms of the patient's insurance coverage.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              122. ClaimResponse.item.adjudication.id
                                                                                              Definition

                                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                              ShortUnique id for inter-element referencing
                                                                                              Control0..1
                                                                                              This element is affected by the following invariants: ele-1
                                                                                              Typestring
                                                                                              Is Modifierfalse
                                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                                              Summaryfalse
                                                                                              124. ClaimResponse.item.adjudication.extension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                              ShortAdditional content defined by implementations
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifierfalse
                                                                                              Summaryfalse
                                                                                              Alternate Namesextensions, user content
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              126. ClaimResponse.item.adjudication.modifierExtension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                              Summarytrue
                                                                                              Requirements

                                                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                              Alternate Namesextensions, user content, modifiers
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              128. ClaimResponse.item.adjudication.category
                                                                                              Definition

                                                                                              A code to indicate the information type of this adjudication record. Information types may include the value submitted, maximum values or percentages allowed or payable under the plan, amounts that: the patient is responsible for in aggregate or pertaining to this item; amounts paid by other coverages; and, the benefit payable for this item.

                                                                                              ShortType of adjudication information
                                                                                              Comments

                                                                                              For example codes indicating: Co-Pay, deductible, eligible, benefit, tax, etc.

                                                                                              Control1..1
                                                                                              BindingFor example codes, see AdjudicationValueCodes
                                                                                              (example to http://hl7.org/fhir/ValueSet/adjudication|5.0.0)

                                                                                              The adjudication codes.

                                                                                              TypeCodeableConcept
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Needed to enable understanding of the context of the other information in the adjudication.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              130. ClaimResponse.item.adjudication.reason
                                                                                              Definition

                                                                                              A code supporting the understanding of the adjudication result and explaining variance from expected amount.

                                                                                              ShortExplanation of adjudication outcome
                                                                                              Comments

                                                                                              For example may indicate that the funds for this benefit type have been exhausted.

                                                                                              Control0..1
                                                                                              BindingFor example codes, see AdjudicationReasonCodes
                                                                                              (example to http://hl7.org/fhir/ValueSet/adjudication-reason|5.0.0)

                                                                                              The adjudication reason codes.

                                                                                              TypeCodeableConcept
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              To support understanding of variance from adjudication expectations.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              132. ClaimResponse.item.adjudication.amount
                                                                                              Definition

                                                                                              Monetary amount associated with the category.

                                                                                              ShortMonetary amount
                                                                                              Comments

                                                                                              For example: amount submitted, eligible amount, co-payment, and benefit payable.

                                                                                              Control0..1
                                                                                              TypeMoney
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Most adjudication categories convey a monetary amount.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              134. ClaimResponse.item.adjudication.quantity
                                                                                              Definition

                                                                                              A non-monetary value associated with the category. Mutually exclusive to the amount element above.

                                                                                              ShortNon-monetary value
                                                                                              Comments

                                                                                              For example: eligible percentage or co-payment percentage.

                                                                                              Control0..1
                                                                                              TypeQuantity
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Some adjudication categories convey a percentage or a fixed value.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              136. ClaimResponse.item.detail
                                                                                              Definition

                                                                                              A claim detail. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

                                                                                              ShortAdjudication for claim details
                                                                                              Control0..*
                                                                                              TypeBackboneElement
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              The adjudication for details provided on the claim.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              138. ClaimResponse.item.detail.id
                                                                                              Definition

                                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                              ShortUnique id for inter-element referencing
                                                                                              Control0..1
                                                                                              This element is affected by the following invariants: ele-1
                                                                                              Typestring
                                                                                              Is Modifierfalse
                                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                                              Summaryfalse
                                                                                              140. ClaimResponse.item.detail.extension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                              ShortAdditional content defined by implementations
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifierfalse
                                                                                              Summaryfalse
                                                                                              Alternate Namesextensions, user content
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              142. ClaimResponse.item.detail.modifierExtension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                              Summarytrue
                                                                                              Requirements

                                                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                              Alternate Namesextensions, user content, modifiers
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              144. ClaimResponse.item.detail.detailSequence
                                                                                              Definition

                                                                                              A number to uniquely reference the claim detail entry.

                                                                                              ShortClaim detail instance identifier
                                                                                              Control1..1
                                                                                              TypepositiveInt
                                                                                              Is Modifierfalse
                                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Necessary to provide a mechanism to link the adjudication result to the submitted claim detail.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              146. ClaimResponse.item.detail.traceNumber
                                                                                              Definition

                                                                                              Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                                                                                              ShortNumber for tracking
                                                                                              Control0..*
                                                                                              TypeIdentifier
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Allows partners to uniquely identify components for tracking.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              148. ClaimResponse.item.detail.noteNumber
                                                                                              Definition

                                                                                              The numbers associated with notes below which apply to the adjudication of this item.

                                                                                              ShortApplicable note numbers
                                                                                              Control0..*
                                                                                              TypepositiveInt
                                                                                              Is Modifierfalse
                                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              150. ClaimResponse.item.detail.reviewOutcome
                                                                                              Definition

                                                                                              The high-level results of the adjudication if adjudication has been performed.

                                                                                              ShortDetail level adjudication results
                                                                                              Control0..1
                                                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              152. ClaimResponse.item.detail.adjudication
                                                                                              Definition

                                                                                              The adjudication results.

                                                                                              ShortDetail level adjudication details
                                                                                              Control0..*
                                                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              154. ClaimResponse.item.detail.subDetail
                                                                                              Definition

                                                                                              A sub-detail adjudication of a simple product or service.

                                                                                              ShortAdjudication for claim sub-details
                                                                                              Control0..*
                                                                                              TypeBackboneElement
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              The adjudication for sub-details provided on the claim.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              156. ClaimResponse.item.detail.subDetail.id
                                                                                              Definition

                                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                              ShortUnique id for inter-element referencing
                                                                                              Control0..1
                                                                                              This element is affected by the following invariants: ele-1
                                                                                              Typestring
                                                                                              Is Modifierfalse
                                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                                              Summaryfalse
                                                                                              158. ClaimResponse.item.detail.subDetail.extension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                              ShortAdditional content defined by implementations
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifierfalse
                                                                                              Summaryfalse
                                                                                              Alternate Namesextensions, user content
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              160. ClaimResponse.item.detail.subDetail.modifierExtension
                                                                                              Definition

                                                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                                                              Comments

                                                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                              Summarytrue
                                                                                              Requirements

                                                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                              Alternate Namesextensions, user content, modifiers
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              162. ClaimResponse.item.detail.subDetail.subDetailSequence
                                                                                              Definition

                                                                                              A number to uniquely reference the claim sub-detail entry.

                                                                                              ShortClaim sub-detail instance identifier
                                                                                              Control1..1
                                                                                              TypepositiveInt
                                                                                              Is Modifierfalse
                                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Necessary to provide a mechanism to link the adjudication result to the submitted claim sub-detail.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              164. ClaimResponse.item.detail.subDetail.traceNumber
                                                                                              Definition

                                                                                              Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                                                                                              ShortNumber for tracking
                                                                                              Control0..*
                                                                                              TypeIdentifier
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Allows partners to uniquely identify components for tracking.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              166. ClaimResponse.item.detail.subDetail.noteNumber
                                                                                              Definition

                                                                                              The numbers associated with notes below which apply to the adjudication of this item.

                                                                                              ShortApplicable note numbers
                                                                                              Control0..*
                                                                                              TypepositiveInt
                                                                                              Is Modifierfalse
                                                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              168. ClaimResponse.item.detail.subDetail.reviewOutcome
                                                                                              Definition

                                                                                              The high-level results of the adjudication if adjudication has been performed.

                                                                                              ShortSubdetail level adjudication results
                                                                                              Control0..1
                                                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              170. ClaimResponse.item.detail.subDetail.adjudication
                                                                                              Definition

                                                                                              The adjudication results.

                                                                                              ShortSubdetail level adjudication details
                                                                                              Control0..*
                                                                                              TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              172. ClaimResponse.addItem
                                                                                              Definition

                                                                                              The first-tier service adjudications for payor added product or service lines.

                                                                                              ShortInsurer added line items
                                                                                              Control0..*
                                                                                              TypeBackboneElement
                                                                                              Is Modifierfalse
                                                                                              Must Supportfalse
                                                                                              Summaryfalse
                                                                                              Requirements

                                                                                              Insurers may redefine the provided product or service or may package and/or decompose groups of products and services. The addItems allows the insurer to provide their line item list with linkage to the submitted items/details/sub-details. In a preauthorization the insurer may use the addItem structure to provide additional information on authorized products and services.

                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              174. ClaimResponse.addItem.id
                                                                                              Definition

                                                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                              ShortUnique id for inter-element referencing
                                                                                              Control0..1
                                                                                              This element is affected by the following invariants: ele-1
                                                                                              Typestring
                                                                                              Is Modifierfalse
                                                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                                                              Summaryfalse
                                                                                              176. ClaimResponse.addItem.extension
                                                                                              Definition

                                                                                              An Extension

                                                                                              ShortExtension
                                                                                              Control0..*
                                                                                              TypeExtension
                                                                                              Is Modifierfalse
                                                                                              Summaryfalse
                                                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                              SlicingThis element introduces a set of slices on ClaimResponse.addItem.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                                                              • value @ url
                                                                                              • 178. ClaimResponse.addItem.extension:AddItemCategory
                                                                                                Slice NameAddItemCategory
                                                                                                Definition

                                                                                                Benefit classification

                                                                                                ShortAddItemCategory
                                                                                                Control0..1
                                                                                                TypeExtension(AddItemCategory) (Extension Type: CodeableConcept)
                                                                                                Is Modifierfalse
                                                                                                Obligations
                                                                                                  ObligationsActor
                                                                                                  SHALL:populateMoped SV Actor
                                                                                                  Summaryfalse
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  180. ClaimResponse.addItem.modifierExtension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  182. ClaimResponse.addItem.itemSequence
                                                                                                  Definition

                                                                                                  Claim items which this service line is intended to replace.

                                                                                                  ShortItem sequence number
                                                                                                  Control0..*
                                                                                                  TypepositiveInt
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides references to the claim items.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  184. ClaimResponse.addItem.detailSequence
                                                                                                  Definition

                                                                                                  The sequence number of the details within the claim item which this line is intended to replace.

                                                                                                  ShortDetail sequence number
                                                                                                  Control0..*
                                                                                                  TypepositiveInt
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides references to the claim details within the claim item.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  186. ClaimResponse.addItem.subdetailSequence
                                                                                                  Definition

                                                                                                  The sequence number of the sub-details within the details within the claim item which this line is intended to replace.

                                                                                                  ShortSubdetail sequence number
                                                                                                  Control0..*
                                                                                                  TypepositiveInt
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides references to the claim sub-details within the claim detail.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  188. ClaimResponse.addItem.traceNumber
                                                                                                  Definition

                                                                                                  Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                                                                                                  ShortNumber for tracking
                                                                                                  Control0..*
                                                                                                  TypeIdentifier
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Allows partners to uniquely identify components for tracking.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  190. ClaimResponse.addItem.provider
                                                                                                  Definition

                                                                                                  The providers who are authorized for the services rendered to the patient.

                                                                                                  ShortAuthorized providers
                                                                                                  Control0..*
                                                                                                  TypeReference(Practitioner, PractitionerRole, Organization)
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Insurer may provide authorization specifically to a restricted set of providers rather than an open authorization.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  192. ClaimResponse.addItem.revenue
                                                                                                  Definition

                                                                                                  The type of revenue or cost center providing the product and/or service.

                                                                                                  ShortRevenue or cost center code
                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see ExampleRevenueCenterCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/ex-revenue-center|5.0.0)

                                                                                                  Codes for the revenue or cost centers supplying the service and/or products.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Needed in the processing of institutional claims.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  194. ClaimResponse.addItem.productOrService
                                                                                                  Definition

                                                                                                  When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                                                                                                  ShortBilling, service, product, or drug code
                                                                                                  Comments

                                                                                                  If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see USCLSCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/service-uscls|5.0.0)

                                                                                                  Allowable service and product codes.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Necessary to state what was provided or done.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  196. ClaimResponse.addItem.productOrServiceEnd
                                                                                                  Definition

                                                                                                  This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                                                                                                  ShortEnd of a range of codes
                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see USCLSCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/service-uscls|5.0.0)
                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  198. ClaimResponse.addItem.request
                                                                                                  Definition

                                                                                                  Request or Referral for Goods or Service to be rendered.

                                                                                                  ShortRequest or Referral for Service
                                                                                                  Control0..*
                                                                                                  TypeReference(DeviceRequest, MedicationRequest, NutritionOrder, ServiceRequest, SupplyRequest, VisionPrescription)
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  May identify the service to be provided or provider authorization for the service.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  200. ClaimResponse.addItem.modifier
                                                                                                  Definition

                                                                                                  Item typification or modifiers codes to convey additional context for the product or service.

                                                                                                  ShortService/Product billing modifiers
                                                                                                  Comments

                                                                                                  For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

                                                                                                  Control0..*
                                                                                                  BindingFor example codes, see ModifierTypeCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/claim-modifiers|5.0.0)

                                                                                                  Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  To support inclusion of the item for adjudication or to charge an elevated fee.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  202. ClaimResponse.addItem.programCode
                                                                                                  Definition

                                                                                                  Identifies the program under which this may be recovered.

                                                                                                  ShortProgram the product or service is provided under
                                                                                                  Comments

                                                                                                  For example: Neonatal program, child dental program or drug users recovery program.

                                                                                                  Control0..*
                                                                                                  BindingFor example codes, see ExampleProgramReasonCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/ex-program-code|5.0.0)

                                                                                                  Program specific reason codes.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  204. ClaimResponse.addItem.serviced[x]
                                                                                                  Definition

                                                                                                  The date or dates when the service or product was supplied, performed or completed.

                                                                                                  ShortDate or dates of service or product delivery
                                                                                                  Control0..1
                                                                                                  TypeChoice of: date, Period
                                                                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Needed to determine whether the service or product was provided during the term of the insurance coverage.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  206. ClaimResponse.addItem.location[x]
                                                                                                  Definition

                                                                                                  Where the product or service was provided.

                                                                                                  ShortPlace of service or where product was supplied
                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see ExampleServicePlaceCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/service-place|5.0.0)

                                                                                                  Place of service: pharmacy, school, prison, etc.

                                                                                                  TypeChoice of: CodeableConcept, Address, Reference(Location)
                                                                                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  The location can alter whether the item was acceptable for insurance purposes or impact the determination of the benefit amount.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  208. ClaimResponse.addItem.quantity
                                                                                                  Definition

                                                                                                  The number of repetitions of a service or product.

                                                                                                  ShortCount of products or services
                                                                                                  Control0..1
                                                                                                  TypeQuantity(SimpleQuantity)
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Required when the product or service code does not convey the quantity provided.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  210. ClaimResponse.addItem.unitPrice
                                                                                                  Definition

                                                                                                  If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                                                                                                  ShortFee, charge or cost per item
                                                                                                  Control0..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  The amount charged to the patient by the provider for a single unit.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  212. ClaimResponse.addItem.factor
                                                                                                  Definition

                                                                                                  A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                                                                                                  ShortPrice scaling factor
                                                                                                  Comments

                                                                                                  To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                                                                                                  Control0..1
                                                                                                  Typedecimal
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  214. ClaimResponse.addItem.tax
                                                                                                  Definition

                                                                                                  The total of taxes applicable for this product or service.

                                                                                                  ShortTotal tax
                                                                                                  Control0..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Required when taxes are not embedded in the unit price or provided as a separate service.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  216. ClaimResponse.addItem.net
                                                                                                  Definition

                                                                                                  The total amount claimed for the group (if a grouper) or the addItem. Net = unit price * quantity * factor.

                                                                                                  ShortTotal item cost
                                                                                                  Comments

                                                                                                  For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                                                                                                  Control0..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides the total amount claimed for the group (if a grouper) or the line item.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  218. ClaimResponse.addItem.bodySite
                                                                                                  Definition

                                                                                                  Physical location where the service is performed or applies.

                                                                                                  ShortAnatomical location
                                                                                                  Control0..*
                                                                                                  TypeBackboneElement
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  220. ClaimResponse.addItem.bodySite.id
                                                                                                  Definition

                                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                                  ShortUnique id for inter-element referencing
                                                                                                  Control0..1
                                                                                                  This element is affected by the following invariants: ele-1
                                                                                                  Typestring
                                                                                                  Is Modifierfalse
                                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                                  Summaryfalse
                                                                                                  222. ClaimResponse.addItem.bodySite.extension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                                  ShortAdditional content defined by implementations
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifierfalse
                                                                                                  Summaryfalse
                                                                                                  Alternate Namesextensions, user content
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  224. ClaimResponse.addItem.bodySite.modifierExtension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  226. ClaimResponse.addItem.bodySite.site
                                                                                                  Definition

                                                                                                  Physical service site on the patient (limb, tooth, etc.).

                                                                                                  ShortLocation
                                                                                                  Comments

                                                                                                  For example: Providing a tooth code allows an insurer to identify a provider performing a filling on a tooth that was previously removed.

                                                                                                  Control1..*
                                                                                                  BindingFor example codes, see OralSiteCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/tooth|5.0.0)
                                                                                                  TypeCodeableReference(BodyStructure)
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Allows insurer to validate specific procedures.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  228. ClaimResponse.addItem.bodySite.subSite
                                                                                                  Definition

                                                                                                  A region or surface of the bodySite, e.g. limb region or tooth surface(s).

                                                                                                  ShortSub-location
                                                                                                  Control0..*
                                                                                                  BindingFor example codes, see SurfaceCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/surface|5.0.0)
                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Allows insurer to validate specific procedures.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  230. ClaimResponse.addItem.noteNumber
                                                                                                  Definition

                                                                                                  The numbers associated with notes below which apply to the adjudication of this item.

                                                                                                  ShortApplicable note numbers
                                                                                                  Control0..*
                                                                                                  TypepositiveInt
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  232. ClaimResponse.addItem.reviewOutcome
                                                                                                  Definition

                                                                                                  The high-level results of the adjudication if adjudication has been performed.

                                                                                                  ShortAdded items adjudication results
                                                                                                  Control0..1
                                                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  234. ClaimResponse.addItem.adjudication
                                                                                                  Definition

                                                                                                  The adjudication results.

                                                                                                  ShortAdded items adjudication
                                                                                                  Control0..*
                                                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  236. ClaimResponse.addItem.detail
                                                                                                  Definition

                                                                                                  The second-tier service adjudications for payor added services.

                                                                                                  ShortInsurer added line details
                                                                                                  Control0..*
                                                                                                  TypeBackboneElement
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  238. ClaimResponse.addItem.detail.id
                                                                                                  Definition

                                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                                  ShortUnique id for inter-element referencing
                                                                                                  Control0..1
                                                                                                  This element is affected by the following invariants: ele-1
                                                                                                  Typestring
                                                                                                  Is Modifierfalse
                                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                                  Summaryfalse
                                                                                                  240. ClaimResponse.addItem.detail.extension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                                  ShortAdditional content defined by implementations
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifierfalse
                                                                                                  Summaryfalse
                                                                                                  Alternate Namesextensions, user content
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  242. ClaimResponse.addItem.detail.modifierExtension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  244. ClaimResponse.addItem.detail.traceNumber
                                                                                                  Definition

                                                                                                  Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                                                                                                  ShortNumber for tracking
                                                                                                  Control0..*
                                                                                                  TypeIdentifier
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Allows partners to uniquely identify components for tracking.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  246. ClaimResponse.addItem.detail.revenue
                                                                                                  Definition

                                                                                                  The type of revenue or cost center providing the product and/or service.

                                                                                                  ShortRevenue or cost center code
                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see ExampleRevenueCenterCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/ex-revenue-center|5.0.0)

                                                                                                  Codes for the revenue or cost centers supplying the service and/or products.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Needed in the processing of institutional claims.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  248. ClaimResponse.addItem.detail.productOrService
                                                                                                  Definition

                                                                                                  When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                                                                                                  ShortBilling, service, product, or drug code
                                                                                                  Comments

                                                                                                  If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see USCLSCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/service-uscls|5.0.0)

                                                                                                  Allowable service and product codes.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Necessary to state what was provided or done.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  250. ClaimResponse.addItem.detail.productOrServiceEnd
                                                                                                  Definition

                                                                                                  This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                                                                                                  ShortEnd of a range of codes
                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see USCLSCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/service-uscls|5.0.0)
                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  252. ClaimResponse.addItem.detail.modifier
                                                                                                  Definition

                                                                                                  Item typification or modifiers codes to convey additional context for the product or service.

                                                                                                  ShortService/Product billing modifiers
                                                                                                  Comments

                                                                                                  For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

                                                                                                  Control0..*
                                                                                                  BindingFor example codes, see ModifierTypeCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/claim-modifiers|5.0.0)

                                                                                                  Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  To support inclusion of the item for adjudication or to charge an elevated fee.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  254. ClaimResponse.addItem.detail.quantity
                                                                                                  Definition

                                                                                                  The number of repetitions of a service or product.

                                                                                                  ShortCount of products or services
                                                                                                  Control0..1
                                                                                                  TypeQuantity(SimpleQuantity)
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Required when the product or service code does not convey the quantity provided.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  256. ClaimResponse.addItem.detail.unitPrice
                                                                                                  Definition

                                                                                                  If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                                                                                                  ShortFee, charge or cost per item
                                                                                                  Control0..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  The amount charged to the patient by the provider for a single unit.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  258. ClaimResponse.addItem.detail.factor
                                                                                                  Definition

                                                                                                  A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                                                                                                  ShortPrice scaling factor
                                                                                                  Comments

                                                                                                  To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                                                                                                  Control0..1
                                                                                                  Typedecimal
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  260. ClaimResponse.addItem.detail.tax
                                                                                                  Definition

                                                                                                  The total of taxes applicable for this product or service.

                                                                                                  ShortTotal tax
                                                                                                  Control0..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Required when taxes are not embedded in the unit price or provided as a separate service.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  262. ClaimResponse.addItem.detail.net
                                                                                                  Definition

                                                                                                  The total amount claimed for the group (if a grouper) or the addItem.detail. Net = unit price * quantity * factor.

                                                                                                  ShortTotal item cost
                                                                                                  Comments

                                                                                                  For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                                                                                                  Control0..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides the total amount claimed for the group (if a grouper) or the line item.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  264. ClaimResponse.addItem.detail.noteNumber
                                                                                                  Definition

                                                                                                  The numbers associated with notes below which apply to the adjudication of this item.

                                                                                                  ShortApplicable note numbers
                                                                                                  Control0..*
                                                                                                  TypepositiveInt
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  266. ClaimResponse.addItem.detail.reviewOutcome
                                                                                                  Definition

                                                                                                  The high-level results of the adjudication if adjudication has been performed.

                                                                                                  ShortAdded items detail level adjudication results
                                                                                                  Control0..1
                                                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  268. ClaimResponse.addItem.detail.adjudication
                                                                                                  Definition

                                                                                                  The adjudication results.

                                                                                                  ShortAdded items detail adjudication
                                                                                                  Control0..*
                                                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  270. ClaimResponse.addItem.detail.subDetail
                                                                                                  Definition

                                                                                                  The third-tier service adjudications for payor added services.

                                                                                                  ShortInsurer added line items
                                                                                                  Control0..*
                                                                                                  TypeBackboneElement
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  272. ClaimResponse.addItem.detail.subDetail.id
                                                                                                  Definition

                                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                                  ShortUnique id for inter-element referencing
                                                                                                  Control0..1
                                                                                                  This element is affected by the following invariants: ele-1
                                                                                                  Typestring
                                                                                                  Is Modifierfalse
                                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                                  Summaryfalse
                                                                                                  274. ClaimResponse.addItem.detail.subDetail.extension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                                  ShortAdditional content defined by implementations
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifierfalse
                                                                                                  Summaryfalse
                                                                                                  Alternate Namesextensions, user content
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  276. ClaimResponse.addItem.detail.subDetail.modifierExtension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  278. ClaimResponse.addItem.detail.subDetail.traceNumber
                                                                                                  Definition

                                                                                                  Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                                                                                                  ShortNumber for tracking
                                                                                                  Control0..*
                                                                                                  TypeIdentifier
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Allows partners to uniquely identify components for tracking.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  280. ClaimResponse.addItem.detail.subDetail.revenue
                                                                                                  Definition

                                                                                                  The type of revenue or cost center providing the product and/or service.

                                                                                                  ShortRevenue or cost center code
                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see ExampleRevenueCenterCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/ex-revenue-center|5.0.0)

                                                                                                  Codes for the revenue or cost centers supplying the service and/or products.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Needed in the processing of institutional claims.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  282. ClaimResponse.addItem.detail.subDetail.productOrService
                                                                                                  Definition

                                                                                                  When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                                                                                                  ShortBilling, service, product, or drug code
                                                                                                  Comments

                                                                                                  If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see USCLSCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/service-uscls|5.0.0)

                                                                                                  Allowable service and product codes.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Necessary to state what was provided or done.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  284. ClaimResponse.addItem.detail.subDetail.productOrServiceEnd
                                                                                                  Definition

                                                                                                  This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                                                                                                  ShortEnd of a range of codes
                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see USCLSCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/service-uscls|5.0.0)
                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  286. ClaimResponse.addItem.detail.subDetail.modifier
                                                                                                  Definition

                                                                                                  Item typification or modifiers codes to convey additional context for the product or service.

                                                                                                  ShortService/Product billing modifiers
                                                                                                  Comments

                                                                                                  For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

                                                                                                  Control0..*
                                                                                                  BindingFor example codes, see ModifierTypeCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/claim-modifiers|5.0.0)

                                                                                                  Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  To support inclusion of the item for adjudication or to charge an elevated fee.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  288. ClaimResponse.addItem.detail.subDetail.quantity
                                                                                                  Definition

                                                                                                  The number of repetitions of a service or product.

                                                                                                  ShortCount of products or services
                                                                                                  Control0..1
                                                                                                  TypeQuantity(SimpleQuantity)
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Required when the product or service code does not convey the quantity provided.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  290. ClaimResponse.addItem.detail.subDetail.unitPrice
                                                                                                  Definition

                                                                                                  If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                                                                                                  ShortFee, charge or cost per item
                                                                                                  Control0..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  The amount charged to the patient by the provider for a single unit.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  292. ClaimResponse.addItem.detail.subDetail.factor
                                                                                                  Definition

                                                                                                  A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                                                                                                  ShortPrice scaling factor
                                                                                                  Comments

                                                                                                  To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                                                                                                  Control0..1
                                                                                                  Typedecimal
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  294. ClaimResponse.addItem.detail.subDetail.tax
                                                                                                  Definition

                                                                                                  The total of taxes applicable for this product or service.

                                                                                                  ShortTotal tax
                                                                                                  Control0..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Required when taxes are not embedded in the unit price or provided as a separate service.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  296. ClaimResponse.addItem.detail.subDetail.net
                                                                                                  Definition

                                                                                                  The total amount claimed for the addItem.detail.subDetail. Net = unit price * quantity * factor.

                                                                                                  ShortTotal item cost
                                                                                                  Comments

                                                                                                  For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                                                                                                  Control0..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides the total amount claimed for the group (if a grouper) or the line item.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  298. ClaimResponse.addItem.detail.subDetail.noteNumber
                                                                                                  Definition

                                                                                                  The numbers associated with notes below which apply to the adjudication of this item.

                                                                                                  ShortApplicable note numbers
                                                                                                  Control0..*
                                                                                                  TypepositiveInt
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  300. ClaimResponse.addItem.detail.subDetail.reviewOutcome
                                                                                                  Definition

                                                                                                  The high-level results of the adjudication if adjudication has been performed.

                                                                                                  ShortAdded items subdetail level adjudication results
                                                                                                  Control0..1
                                                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  302. ClaimResponse.addItem.detail.subDetail.adjudication
                                                                                                  Definition

                                                                                                  The adjudication results.

                                                                                                  ShortAdded items subdetail adjudication
                                                                                                  Control0..*
                                                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  304. ClaimResponse.adjudication
                                                                                                  Definition

                                                                                                  The adjudication results which are presented at the header level rather than at the line-item or add-item levels.

                                                                                                  ShortHeader-level adjudication
                                                                                                  Control0..*
                                                                                                  TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Some insurers will receive line-items but provide the adjudication only at a summary or header-level.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  306. ClaimResponse.total
                                                                                                  Definition

                                                                                                  Categorized monetary totals for the adjudication.

                                                                                                  ShortAdjudication totals
                                                                                                  Comments

                                                                                                  Totals for amounts submitted, co-pays, benefits payable etc.

                                                                                                  Control0..*
                                                                                                  TypeBackboneElement
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  To provide the requestor with financial totals by category for the adjudication.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  308. ClaimResponse.total.id
                                                                                                  Definition

                                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                                  ShortUnique id for inter-element referencing
                                                                                                  Control0..1
                                                                                                  This element is affected by the following invariants: ele-1
                                                                                                  Typestring
                                                                                                  Is Modifierfalse
                                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                                  Summaryfalse
                                                                                                  310. ClaimResponse.total.extension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                                  ShortAdditional content defined by implementations
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifierfalse
                                                                                                  Summaryfalse
                                                                                                  Alternate Namesextensions, user content
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  312. ClaimResponse.total.modifierExtension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  314. ClaimResponse.total.category
                                                                                                  Definition

                                                                                                  A code to indicate the information type of this adjudication record. Information types may include: the value submitted, maximum values or percentages allowed or payable under the plan, amounts that the patient is responsible for in aggregate or pertaining to this item, amounts paid by other coverages, and the benefit payable for this item.

                                                                                                  ShortType of adjudication information
                                                                                                  Comments

                                                                                                  For example codes indicating: Co-Pay, deductible, eligible, benefit, tax, etc.

                                                                                                  Control1..1
                                                                                                  BindingFor example codes, see AdjudicationValueCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/adjudication|5.0.0)

                                                                                                  The adjudication codes.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Needed to convey the type of total provided.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  316. ClaimResponse.total.amount
                                                                                                  Definition

                                                                                                  Monetary total amount associated with the category.

                                                                                                  ShortFinancial total for the category
                                                                                                  Control1..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Needed to convey the total monetary amount.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  318. ClaimResponse.payment
                                                                                                  Definition

                                                                                                  Payment details for the adjudication of the claim.

                                                                                                  ShortPayment Details
                                                                                                  Control0..1
                                                                                                  TypeBackboneElement
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Needed to convey references to the financial instrument that has been used if payment has been made.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  320. ClaimResponse.payment.id
                                                                                                  Definition

                                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                                  ShortUnique id for inter-element referencing
                                                                                                  Control0..1
                                                                                                  This element is affected by the following invariants: ele-1
                                                                                                  Typestring
                                                                                                  Is Modifierfalse
                                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                                  Summaryfalse
                                                                                                  322. ClaimResponse.payment.extension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                                  ShortAdditional content defined by implementations
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifierfalse
                                                                                                  Summaryfalse
                                                                                                  Alternate Namesextensions, user content
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  324. ClaimResponse.payment.modifierExtension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  326. ClaimResponse.payment.type
                                                                                                  Definition

                                                                                                  Whether this represents partial or complete payment of the benefits payable.

                                                                                                  ShortPartial or complete payment
                                                                                                  Control1..1
                                                                                                  BindingFor example codes, see ExamplePaymentTypeCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/ex-paymenttype|5.0.0)

                                                                                                  The type (partial, complete) of the payment.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  To advise the requestor when the insurer believes all payments to have been completed.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  328. ClaimResponse.payment.adjustment
                                                                                                  Definition

                                                                                                  Total amount of all adjustments to this payment included in this transaction which are not related to this claim's adjudication.

                                                                                                  ShortPayment adjustment for non-claim issues
                                                                                                  Comments

                                                                                                  Insurers will deduct amounts owing from the provider (adjustment), such as a prior overpayment, from the amount owing to the provider (benefits payable) when payment is made to the provider.

                                                                                                  Control0..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  To advise the requestor of adjustments applied to the payment.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  330. ClaimResponse.payment.adjustmentReason
                                                                                                  Definition

                                                                                                  Reason for the payment adjustment.

                                                                                                  ShortExplanation for the adjustment
                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see PaymentAdjustmentReasonCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/payment-adjustment-reason|5.0.0)

                                                                                                  Payment Adjustment reason codes.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Needed to clarify the monetary adjustment.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  332. ClaimResponse.payment.date
                                                                                                  Definition

                                                                                                  Estimated date the payment will be issued or the actual issue date of payment.

                                                                                                  ShortExpected date of payment
                                                                                                  Control0..1
                                                                                                  Typedate
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  To advise the payee when payment can be expected.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  334. ClaimResponse.payment.amount
                                                                                                  Definition

                                                                                                  Benefits payable less any payment adjustment.

                                                                                                  ShortPayable amount after adjustment
                                                                                                  Control1..1
                                                                                                  TypeMoney
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Needed to provide the actual payment amount.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  336. ClaimResponse.payment.identifier
                                                                                                  Definition

                                                                                                  Issuer's unique identifier for the payment instrument.

                                                                                                  ShortBusiness identifier for the payment
                                                                                                  Comments

                                                                                                  For example: EFT number or check number.

                                                                                                  NoteThis is a business identifier, not a resource identifier (see discussion)
                                                                                                  Control0..1
                                                                                                  TypeIdentifier
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Enable the receiver to reconcile when payment received.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  338. ClaimResponse.fundsReserve
                                                                                                  Definition

                                                                                                  A code, used only on a response to a preauthorization, to indicate whether the benefits payable have been reserved and for whom.

                                                                                                  ShortFunds reserved status
                                                                                                  Comments

                                                                                                  Fund would be release by a future claim quoting the preAuthRef of this response. Examples of values include: provider, patient, none.

                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see FundsReservationCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/fundsreserve|5.0.0)

                                                                                                  For whom funds are to be reserved: (Patient, Provider, None).

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Needed to advise the submitting provider on whether the rquest for reservation of funds has been honored.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  340. ClaimResponse.formCode
                                                                                                  Definition

                                                                                                  A code for the form to be used for printing the content.

                                                                                                  ShortPrinted form identifier
                                                                                                  Comments

                                                                                                  May be needed to identify specific jurisdictional forms.

                                                                                                  Control0..1
                                                                                                  BindingFor example codes, see FormCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/forms|5.0.0)

                                                                                                  The forms codes.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Needed to specify the specific form used for producing output for this response.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  342. ClaimResponse.form
                                                                                                  Definition

                                                                                                  The actual form, by reference or inclusion, for printing the content or an EOB.

                                                                                                  ShortPrinted reference or actual form
                                                                                                  Comments

                                                                                                  Needed to permit insurers to include the actual form.

                                                                                                  Control0..1
                                                                                                  TypeAttachment
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Needed to include the specific form used for producing output for this response.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  344. ClaimResponse.processNote
                                                                                                  Definition

                                                                                                  A note that describes or explains adjudication results in a human readable form.

                                                                                                  ShortNote concerning adjudication
                                                                                                  Control0..*
                                                                                                  TypeBackboneElement
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides the insurer specific textual explanations associated with the processing.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  346. ClaimResponse.processNote.id
                                                                                                  Definition

                                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                                  ShortUnique id for inter-element referencing
                                                                                                  Control0..1
                                                                                                  This element is affected by the following invariants: ele-1
                                                                                                  Typestring
                                                                                                  Is Modifierfalse
                                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                                  Summaryfalse
                                                                                                  348. ClaimResponse.processNote.extension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                                  ShortAdditional content defined by implementations
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifierfalse
                                                                                                  Summaryfalse
                                                                                                  Alternate Namesextensions, user content
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  350. ClaimResponse.processNote.modifierExtension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  352. ClaimResponse.processNote.number
                                                                                                  Definition

                                                                                                  A number to uniquely identify a note entry.

                                                                                                  ShortNote instance identifier
                                                                                                  Control0..1
                                                                                                  TypepositiveInt
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Necessary to provide a mechanism to link from adjudications.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  354. ClaimResponse.processNote.type
                                                                                                  Definition

                                                                                                  The business purpose of the note text.

                                                                                                  ShortNote purpose
                                                                                                  Control0..1
                                                                                                  BindingUnless not suitable, these codes SHALL be taken from NoteType
                                                                                                  (extensible to http://hl7.org/fhir/ValueSet/note-type|5.0.0)

                                                                                                  The presentation types of notes.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  To convey the expectation for when the text is used.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  356. ClaimResponse.processNote.text
                                                                                                  Definition

                                                                                                  The explanation or description associated with the processing.

                                                                                                  ShortNote explanatory text
                                                                                                  Control1..1
                                                                                                  Typestring
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Required to provide human readable explanation.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  358. ClaimResponse.processNote.language
                                                                                                  Definition

                                                                                                  A code to define the language used in the text of the note.

                                                                                                  ShortLanguage of the text
                                                                                                  Comments

                                                                                                  Only required if the language is different from the resource language.

                                                                                                  Control0..1
                                                                                                  BindingThe codes SHALL be taken from AllLanguages
                                                                                                  (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

                                                                                                  IETF language tag for a human language

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Note text may vary from the resource defined language.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  360. ClaimResponse.communicationRequest
                                                                                                  Definition

                                                                                                  Request for additional supporting or authorizing information.

                                                                                                  ShortRequest for additional information
                                                                                                  Comments

                                                                                                  For example: professional reports, documents, images, clinical resources, or accident reports.

                                                                                                  Control0..*
                                                                                                  TypeReference(CommunicationRequest)
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Need to communicate insurer request for additional information required to support the adjudication.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  362. ClaimResponse.insurance
                                                                                                  Definition

                                                                                                  Financial instruments for reimbursement for the health care products and services specified on the claim.

                                                                                                  ShortPatient insurance information
                                                                                                  Comments

                                                                                                  All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

                                                                                                  Control0..*
                                                                                                  TypeBackboneElement
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  At least one insurer is required for a claim to be a claim.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  364. ClaimResponse.insurance.id
                                                                                                  Definition

                                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                                  ShortUnique id for inter-element referencing
                                                                                                  Control0..1
                                                                                                  This element is affected by the following invariants: ele-1
                                                                                                  Typestring
                                                                                                  Is Modifierfalse
                                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                                  Summaryfalse
                                                                                                  366. ClaimResponse.insurance.extension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                                  ShortAdditional content defined by implementations
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifierfalse
                                                                                                  Summaryfalse
                                                                                                  Alternate Namesextensions, user content
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  368. ClaimResponse.insurance.modifierExtension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  370. ClaimResponse.insurance.sequence
                                                                                                  Definition

                                                                                                  A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

                                                                                                  ShortInsurance instance identifier
                                                                                                  Control1..1
                                                                                                  TypepositiveInt
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  To maintain order of the coverages.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  372. ClaimResponse.insurance.focal
                                                                                                  Definition

                                                                                                  A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

                                                                                                  ShortCoverage to be used for adjudication
                                                                                                  Comments

                                                                                                  A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

                                                                                                  Control1..1
                                                                                                  Typeboolean
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  To identify which coverage in the list is being used to adjudicate this claim.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  374. ClaimResponse.insurance.coverage
                                                                                                  Definition

                                                                                                  Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

                                                                                                  ShortInsurance information
                                                                                                  Control1..1
                                                                                                  TypeReference(Coverage)
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Required to allow the adjudicator to locate the correct policy and history within their information system.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  376. ClaimResponse.insurance.businessArrangement
                                                                                                  Definition

                                                                                                  A business agreement number established between the provider and the insurer for special business processing purposes.

                                                                                                  ShortAdditional provider contract number
                                                                                                  Control0..1
                                                                                                  Typestring
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Providers may have multiple business arrangements with a given insurer and must supply the specific contract number for adjudication.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  378. ClaimResponse.insurance.claimResponse
                                                                                                  Definition

                                                                                                  The result of the adjudication of the line items for the Coverage specified in this insurance.

                                                                                                  ShortAdjudication results
                                                                                                  Comments

                                                                                                  Must not be specified when 'focal=true' for this insurance.

                                                                                                  Control0..1
                                                                                                  TypeReference(ClaimResponse)
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  An insurer need the adjudication results from prior insurers to determine the outstanding balance remaining by item for the items in the curent claim.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  380. ClaimResponse.error
                                                                                                  Definition

                                                                                                  Errors encountered during the processing of the adjudication.

                                                                                                  ShortProcessing errors
                                                                                                  Comments

                                                                                                  If the request contains errors then an error element should be provided and no adjudication related sections (item, addItem, or payment) should be present.

                                                                                                  Control0..*
                                                                                                  TypeBackboneElement
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Need to communicate processing issues to the requestor.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  382. ClaimResponse.error.id
                                                                                                  Definition

                                                                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                                                                  ShortUnique id for inter-element referencing
                                                                                                  Control0..1
                                                                                                  This element is affected by the following invariants: ele-1
                                                                                                  Typestring
                                                                                                  Is Modifierfalse
                                                                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                                                                  Summaryfalse
                                                                                                  384. ClaimResponse.error.extension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                                                                  ShortAdditional content defined by implementations
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifierfalse
                                                                                                  Summaryfalse
                                                                                                  Alternate Namesextensions, user content
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  386. ClaimResponse.error.modifierExtension
                                                                                                  Definition

                                                                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                                                                  Comments

                                                                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                                                  Control0..*
                                                                                                  TypeExtension
                                                                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                                                  Alternate Namesextensions, user content, modifiers
                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                                                  388. ClaimResponse.error.itemSequence
                                                                                                  Definition

                                                                                                  The sequence number of the line item submitted which contains the error. This value is omitted when the error occurs outside of the item structure.

                                                                                                  ShortItem sequence number
                                                                                                  Control0..1
                                                                                                  TypepositiveInt
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides references to the claim items.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  390. ClaimResponse.error.detailSequence
                                                                                                  Definition

                                                                                                  The sequence number of the detail within the line item submitted which contains the error. This value is omitted when the error occurs outside of the item structure.

                                                                                                  ShortDetail sequence number
                                                                                                  Control0..1
                                                                                                  TypepositiveInt
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides references to the claim details within the claim item.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  392. ClaimResponse.error.subDetailSequence
                                                                                                  Definition

                                                                                                  The sequence number of the sub-detail within the detail within the line item submitted which contains the error. This value is omitted when the error occurs outside of the item structure.

                                                                                                  ShortSubdetail sequence number
                                                                                                  Control0..1
                                                                                                  TypepositiveInt
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summaryfalse
                                                                                                  Requirements

                                                                                                  Provides references to the claim sub-details within the claim detail.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  394. ClaimResponse.error.code
                                                                                                  Definition

                                                                                                  An error code, from a specified code system, which details why the claim could not be adjudicated.

                                                                                                  ShortError code detailing processing issues
                                                                                                  Control1..1
                                                                                                  BindingFor example codes, see AdjudicationErrorCodes
                                                                                                  (example to http://hl7.org/fhir/ValueSet/adjudication-error|5.0.0)

                                                                                                  The adjudication error codes.

                                                                                                  TypeCodeableConcept
                                                                                                  Is Modifierfalse
                                                                                                  Must Supportfalse
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Required to convey processing errors.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                                                  396. ClaimResponse.error.expression
                                                                                                  Definition

                                                                                                  A simple subset of FHIRPath limited to element names, repetition indicators and the default child accessor that identifies one of the elements in the resource that caused this issue to be raised.

                                                                                                  ShortFHIRPath of element(s) related to issue
                                                                                                  Comments

                                                                                                  The root of the FHIRPath is the resource or bundle that generated OperationOutcome. Each FHIRPath SHALL resolve to a single node.

                                                                                                  Control0..*
                                                                                                  Typestring
                                                                                                  Is Modifierfalse
                                                                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                                                  Must Supportfalse
                                                                                                  Summarytrue
                                                                                                  Requirements

                                                                                                  Allows systems to highlight or otherwise guide users to elements implicated in issues to allow them to be fixed more easily.

                                                                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))