Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED)
0.1.0 - ci-build

Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED) - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: MopedLKFResponse - Detailed Descriptions

Draft as of 2025-03-02

Definitions for the MopedLKFResponse resource profile.

Guidance on how to interpret the contents of this table can be found here

0. ClaimResponse
Definition

This resource provides the adjudication details from the processing of a Claim resource.

ShortResponse to a claim predetermination or preauthorization
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesRemittance Advice
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. ClaimResponse.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. ClaimResponse.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. ClaimResponse.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ClaimResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. ClaimResponse.extension:FehlerWarnung
    Slice NameFehlerWarnung
    Definition

    MOPED Extension für akzeptierte Errors und Warnings

    ShortError/Warning
    Control0..*
    TypeExtension(Error/Warning) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. ClaimResponse.extension:DiagnoseKnoten
    Slice NameDiagnoseKnoten
    Definition

    "Abrechnung - Knoten:" Lukriert die Patient:innen über eine reguläre Gruppe Punkte, so ist in diesem Datenfeld die entsprechende Knotenbezeichnung einzutragen.

    Short"Abrechnung - Knoten:" Lukriert die Patient:innen über eine reguläre Gruppe Punkte, so ist in diesem Datenfeld die entsprechende Knotenbezeichnung einzutragen.
    Control0..1
    TypeExtension(Abrechnung - Knoten) (Extension Type: Coding)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. ClaimResponse.extension:LKFPunkte
    Slice NameLKFPunkte
    Definition

    In dieser Extension werden alle möglichen Punkteangaben im LKF zusammengefasst.

    ShortLKF Punkte
    Control0..*
    TypeExtension(LKF Punkte) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. ClaimResponse.extension:LDFPunktewertNetto
    Slice NameLDFPunktewertNetto
    Definition

    MOPED Extension für den LDF-Punktewert Netto

    ShortLDF-Punktewert Netto
    Control0..1
    TypeExtension(LDF-Punktewert Netto) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. ClaimResponse.extension:LDFBetragNetto
    Slice NameLDFBetragNetto
    Definition

    MOPED Extension für den LDF-Punktewert Netto. Ergibt sich durch Punkteanzahl mal Punktewert Forderungsbasis ohne Berücksichtigung eines Patientenanteiles f. Angehörige bzw. eines Beihilfenäquivalentes

    ShortLDF-Betrag Netto
    Control0..1
    TypeExtension(LDF-Betrag Netto) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. ClaimResponse.extension:PatientenanteilAngehoerige
    Slice NamePatientenanteilAngehoerige
    Definition

    MOPED Extension für den Patientenanteil für Angehörige (tägl. Satz) netto: Betrag in €, 2 Nachkommastellen

    ShortPatientenanteil für Angehoerige
    Control0..1
    TypeExtension(Patientenanteil für Angehoerige) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. ClaimResponse.extension:Patientenanteil
    Slice NamePatientenanteil
    Definition

    MOPED Extension für den Patientenanteil netto: Betrag in €, 2 Nachkommastellen

    ShortPatientenanteil Netto
    Control0..1
    TypeExtension(Patientenanteil Netto) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. ClaimResponse.extension:Beihilfenaequivalent
    Slice NameBeihilfenaequivalent
    Definition

    MOPED Extension für das Beihilfenaequivalent

    ShortBeihilfenaequivalent
    Control0..1
    TypeExtension(Beihilfenaequivalent) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    24. ClaimResponse.extension:ForderungsbetragAuslaenderverrechnungRegress
    Slice NameForderungsbetragAuslaenderverrechnungRegress
    Definition

    MOPED Extension für den Forderungsbetrag für Ausländerverrechnung oder Regress

    ShortForderungsbetrag für Auslaenderverrechnung oder Regress
    Control0..1
    TypeExtension(Forderungsbetrag für Auslaenderverrechnung oder Regress) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    26. ClaimResponse.extension:RechnungsnummerKHLGF
    Slice NameRechnungsnummerKHLGF
    Definition

    MOPED Extension für die Rechnungsnummer der Krankenanstalt bzw. des Landesgesundheitsfonds

    ShortRechnungsnummer der Krankenanstalt bzw. des Landesgesundheitsfonds
    Control0..1
    TypeExtension(Rechnungsnummer der Krankenanstalt bzw. des Landesgesundheitsfonds) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    28. ClaimResponse.extension:Note
    Slice NameNote
    Definition

    Additional notes that apply to this resource or element.

    ShortAdditional notes that apply to this resource or element.
    Comments

    This extension SHALL NOT be used if the resource already has standard 'note' element (or equivalent) of type Annotation on the same element

    Control0..*
    TypeExtension(Note) (Extension Type: Annotation)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    30. ClaimResponse.extension:Sonderleistungsnummer
    Slice NameSonderleistungsnummer
    Definition

    MOPED Extension für die Sonderleistungsnummer

    ShortSonderleistungsnummer
    Control0..1
    TypeExtension(Sonderleistungsnummer) (Extension Type: Coding)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    32. ClaimResponse.extension:AnzahlSonderleistungen
    Slice NameAnzahlSonderleistungen
    Definition

    MOPED Extension für die Anzahl der Sonderleistungen

    ShortAnzahl Sonderleistungen
    Control0..1
    TypeExtension(Anzahl Sonderleistungen) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    34. ClaimResponse.extension:PunkteLDFPauschale
    Slice NamePunkteLDFPauschale
    Definition

    MOPED Extension für die LDF Punkte Pauschale

    ShortPunkte LDF Pauschale
    Control0..1
    TypeExtension(Punkte LDF Pauschale) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    36. ClaimResponse.extension:KonstenmeldungARK
    Slice NameKonstenmeldungARK
    Definition

    MOPED Extension für die Kostenmeldung. Konstenmeldung für A = Ausländerverrechnung, R = Regressangelegenheiten oder K = Kosteninformation

    ShortKostenmeldung für (A/R/K)
    Control0..1
    TypeExtension(Kostenmeldung für (A/R/K)) (Extension Type: Coding)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    38. ClaimResponse.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Must Supportfalse
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    40. ClaimResponse.status
    Definition

    The status of the resource instance.

    Shortactive | cancelled | draft | entered-in-error
    Comments

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|5.0.0
    (required to http://hl7.org/fhir/ValueSet/fm-status|5.0.0)

    A code specifying the state of the resource instance.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

    Pattern Valueactive
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. ClaimResponse.type
    Definition

    A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

    ShortMore granular claim type
    Comments

    This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodeshttp://hl7.org/fhir/ValueSet/claim-type
    (extensible to http://hl7.org/fhir/ValueSet/claim-type)

    The type or discipline-style of the claim.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    Some jurisdictions need a finer grained claim type for routing and adjudication.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. ClaimResponse.type.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control0..*
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Pattern Value{
      "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
      "code" : "institutional"
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. ClaimResponse.use
    Definition

    A code to indicate whether the nature of the request is: Claim - A request to an Insurer to adjudicate the supplied charges for health care goods and services under the identified policy and to pay the determined Benefit amount, if any; Preauthorization - A request to an Insurer to adjudicate the supplied proposed future charges for health care goods and services under the identified policy and to approve the services and provide the expected benefit amounts and potentially to reserve funds to pay the benefits when Claims for the indicated services are later submitted; or, Pre-determination - A request to an Insurer to adjudicate the supplied 'what if' charges for health care goods and services under the identified policy and report back what the Benefit payable would be had the services actually been provided.

    Shortclaim | preauthorization | predetermination
    Control1..1
    BindingThe codes SHALL be taken from Usehttp://hl7.org/fhir/ValueSet/claim-use|5.0.0
    (required to http://hl7.org/fhir/ValueSet/claim-use|5.0.0)

    Claim, preauthorization, predetermination.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    This element is required to understand the nature of the request for adjudication.

    Pattern Valueclaim
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    48. ClaimResponse.patient
    Definition

    The party to whom the professional services and/or products have been supplied or are being considered and for whom actual for facast reimbursement is sought.

    ShortThe recipient of the products and services
    Control1..1
    TypeReference(HL7® AT Core Patient Profile, Patient)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    The patient must be supplied to the insurer so that confirmation of coverage and service hstory may be considered as part of the authorization and/or adjudiction.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    50. ClaimResponse.created
    Definition

    The date this resource was created.

    ShortResponse creation date
    Control1..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    Need to record a timestamp for use by both the recipient and the issuer.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    52. ClaimResponse.insurer
    Definition

    The party responsible for authorization, adjudication and reimbursement.

    ShortParty responsible for reimbursement
    Control10..1
    TypeReference(HL7® AT Core Organization Profile, Organization)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    To be a valid claim, preauthorization or predetermination there must be a party who is responsible for adjudicating the contents against a policy which provides benefits for the patient.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. ClaimResponse.requestor
    Definition

    The provider which is responsible for the claim, predetermination or preauthorization.

    ShortParty responsible for the claim
    Comments

    Typically this field would be 1..1 where this party is accountable for the data content within the claim but is not necessarily the facility, provider group or practitioner who provided the products and services listed within this claim resource. This field is the Billing Provider, for example, a facility, provider group, lab or practitioner..

    Control10..1
    TypeReference(HL7® AT Core Organization Profile, Practitioner, PractitionerRole, Organization)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. ClaimResponse.request
    Definition

    Original request resource reference.

    ShortId of resource triggering adjudication
    Control10..1
    TypeReference(MOPED LKFRequest, Claim)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    58. ClaimResponse.outcome
    Definition

    The outcome of the claim, predetermination, or preauthorization processing.

    Shortqueued | complete | error | partial
    Comments

    The resource may be used to indicate that the Claim/Preauthorization/Pre-determination has been received but processing has not begun (queued); that it has been processed and one or more errors have been detected (error); no errors were detected and some of the adjudication processing has been performed (partial); or all of the adjudication processing has completed without errors (complete).

    Control1..1
    BindingThe codes SHALL be taken from ClaimProcessingCodeshttp://hl7.org/fhir/ValueSet/claim-outcome|5.0.0
    (required to http://hl7.org/fhir/ValueSet/claim-outcome|5.0.0)

    The result of the claim processing.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    To advise the requestor of an overall processing outcome.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    60. ClaimResponse.diagnosisRelatedGroup
    Definition

    A package billing code or bundle code used to group products and services to a particular health condition (such as heart attack) which is based on a predetermined grouping code system.

    Short"Abrechnung - Gruppe:" Dieses Datenfeld ist mit der Codenummer der zutreffenden Abrechnungsgruppe zu befüllen. Bei Datensätzen von stationären Krankenhausaufenthalten, die keiner leistungsorientier- ten Diagnosenfallgruppe zugeordnet werden, erfolgt ein Eintrag entsprechend der jeweiligen Aufnahmeart.Package billing code
    Comments

    For example DRG (Diagnosis Related Group) or a bundled billing code. A patient may have a diagnosis of a Myocardial Infarction and a DRG for HeartAttack would be assigned. The Claim item (and possible subsequent claims) would refer to the DRG for those line items that were for services related to the heart attack event.

    Control0..1
    BindingThe codes SHALL be taken from For example codes, see LKF Abrechnungsgruppehttp://hl7.org/fhir/ValueSet/ex-diagnosisrelatedgroup
    (required to https://elga.moped.at/ValueSet/LKFAbrechnungsGruppe)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Requirements

    Required to relate the current diagnosis to a package billing code that is then referenced on the individual claim items which are specific to the health condition covered by the package code.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. ClaimResponse
    2. ClaimResponse.extension
    SlicingThis element introduces a set of slices on ClaimResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 4. ClaimResponse.extension:FehlerWarnung
      Slice NameFehlerWarnung
      Control0..*
      TypeExtension(Error/Warning) (Complex Extension)
      6. ClaimResponse.extension:DiagnoseKnoten
      Slice NameDiagnoseKnoten
      Control0..1
      TypeExtension(Abrechnung - Knoten) (Extension Type: Coding)
      8. ClaimResponse.extension:LKFPunkte
      Slice NameLKFPunkte
      Control0..*
      TypeExtension(LKF Punkte) (Complex Extension)
      10. ClaimResponse.extension:LDFPunktewertNetto
      Slice NameLDFPunktewertNetto
      Control0..1
      TypeExtension(LDF-Punktewert Netto) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
      12. ClaimResponse.extension:LDFBetragNetto
      Slice NameLDFBetragNetto
      Control0..1
      TypeExtension(LDF-Betrag Netto) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
      14. ClaimResponse.extension:PatientenanteilAngehoerige
      Slice NamePatientenanteilAngehoerige
      Control0..1
      TypeExtension(Patientenanteil für Angehoerige) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
      16. ClaimResponse.extension:Patientenanteil
      Slice NamePatientenanteil
      Control0..1
      TypeExtension(Patientenanteil Netto) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
      18. ClaimResponse.extension:Beihilfenaequivalent
      Slice NameBeihilfenaequivalent
      Control0..1
      TypeExtension(Beihilfenaequivalent) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
      20. ClaimResponse.extension:ForderungsbetragAuslaenderverrechnungRegress
      Slice NameForderungsbetragAuslaenderverrechnungRegress
      Control0..1
      TypeExtension(Forderungsbetrag für Auslaenderverrechnung oder Regress) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
      22. ClaimResponse.extension:RechnungsnummerKHLGF
      Slice NameRechnungsnummerKHLGF
      Control0..1
      TypeExtension(Rechnungsnummer der Krankenanstalt bzw. des Landesgesundheitsfonds) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
      24. ClaimResponse.extension:Note
      Slice NameNote
      Control0..*
      TypeExtension(Note) (Extension Type: Annotation)
      26. ClaimResponse.extension:Sonderleistungsnummer
      Slice NameSonderleistungsnummer
      Control0..1
      TypeExtension(Sonderleistungsnummer) (Extension Type: Coding)
      28. ClaimResponse.extension:AnzahlSonderleistungen
      Slice NameAnzahlSonderleistungen
      Control0..1
      TypeExtension(Anzahl Sonderleistungen) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
      30. ClaimResponse.extension:PunkteLDFPauschale
      Slice NamePunkteLDFPauschale
      Control0..1
      TypeExtension(Punkte LDF Pauschale) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
      32. ClaimResponse.extension:KonstenmeldungARK
      Slice NameKonstenmeldungARK
      Control0..1
      TypeExtension(Kostenmeldung für (A/R/K)) (Extension Type: Coding)
      34. ClaimResponse.status
      Pattern Valueactive
      36. ClaimResponse.type
      38. ClaimResponse.type.coding
      Pattern Value{
        "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
        "code" : "institutional"
      }
      40. ClaimResponse.use
      Pattern Valueclaim
      42. ClaimResponse.patient
      TypeReference(HL7® AT Core Patient Profile)
      44. ClaimResponse.insurer
      Control1..?
      TypeReference(HL7® AT Core Organization Profile)
      46. ClaimResponse.requestor
      Control1..?
      TypeReference(HL7® AT Core Organization Profile)
      48. ClaimResponse.request
      Control1..?
      TypeReference(MOPED LKFRequest)
      50. ClaimResponse.diagnosisRelatedGroup
      Short"Abrechnung - Gruppe:" Dieses Datenfeld ist mit der Codenummer der zutreffenden Abrechnungsgruppe zu befüllen. Bei Datensätzen von stationären Krankenhausaufenthalten, die keiner leistungsorientier- ten Diagnosenfallgruppe zugeordnet werden, erfolgt ein Eintrag entsprechend der jeweiligen Aufnahmeart.
      BindingThe codes SHALL be taken from LKF Abrechnungsgruppe
      (required to https://elga.moped.at/ValueSet/LKFAbrechnungsGruppe)
      52. ClaimResponse.insurance
      54. ClaimResponse.insurance.coverage
      TypeReference(MOPED Coverage)

      Guidance on how to interpret the contents of this table can be found here

      0. ClaimResponse
      Definition

      This resource provides the adjudication details from the processing of a Claim resource.

      ShortResponse to a claim predetermination or preauthorization
      Control0..*
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate NamesRemittance Advice
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. ClaimResponse.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

      Control0..1
      Typeid
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      4. ClaimResponse.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. ClaimResponse.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. ClaimResponse.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHALL be taken from AllLanguages
      (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

      IETF language tag for a human language

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. ClaimResponse.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      This element is affected by the following invariants: dom-6
      TypeNarrative
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. ClaimResponse.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

      Control0..*
      This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
      TypeResource
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. ClaimResponse.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on ClaimResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. ClaimResponse.extension:FehlerWarnung
        Slice NameFehlerWarnung
        Definition

        MOPED Extension für akzeptierte Errors und Warnings

        ShortError/Warning
        Control0..*
        TypeExtension(Error/Warning) (Complex Extension)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. ClaimResponse.extension:DiagnoseKnoten
        Slice NameDiagnoseKnoten
        Definition

        "Abrechnung - Knoten:" Lukriert die Patient:innen über eine reguläre Gruppe Punkte, so ist in diesem Datenfeld die entsprechende Knotenbezeichnung einzutragen.

        Short"Abrechnung - Knoten:" Lukriert die Patient:innen über eine reguläre Gruppe Punkte, so ist in diesem Datenfeld die entsprechende Knotenbezeichnung einzutragen.
        Control0..1
        TypeExtension(Abrechnung - Knoten) (Extension Type: Coding)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. ClaimResponse.extension:LKFPunkte
        Slice NameLKFPunkte
        Definition

        In dieser Extension werden alle möglichen Punkteangaben im LKF zusammengefasst.

        ShortLKF Punkte
        Control0..*
        TypeExtension(LKF Punkte) (Complex Extension)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. ClaimResponse.extension:LDFPunktewertNetto
        Slice NameLDFPunktewertNetto
        Definition

        MOPED Extension für den LDF-Punktewert Netto

        ShortLDF-Punktewert Netto
        Control0..1
        TypeExtension(LDF-Punktewert Netto) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        24. ClaimResponse.extension:LDFBetragNetto
        Slice NameLDFBetragNetto
        Definition

        MOPED Extension für den LDF-Punktewert Netto. Ergibt sich durch Punkteanzahl mal Punktewert Forderungsbasis ohne Berücksichtigung eines Patientenanteiles f. Angehörige bzw. eines Beihilfenäquivalentes

        ShortLDF-Betrag Netto
        Control0..1
        TypeExtension(LDF-Betrag Netto) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        26. ClaimResponse.extension:PatientenanteilAngehoerige
        Slice NamePatientenanteilAngehoerige
        Definition

        MOPED Extension für den Patientenanteil für Angehörige (tägl. Satz) netto: Betrag in €, 2 Nachkommastellen

        ShortPatientenanteil für Angehoerige
        Control0..1
        TypeExtension(Patientenanteil für Angehoerige) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        28. ClaimResponse.extension:Patientenanteil
        Slice NamePatientenanteil
        Definition

        MOPED Extension für den Patientenanteil netto: Betrag in €, 2 Nachkommastellen

        ShortPatientenanteil Netto
        Control0..1
        TypeExtension(Patientenanteil Netto) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        30. ClaimResponse.extension:Beihilfenaequivalent
        Slice NameBeihilfenaequivalent
        Definition

        MOPED Extension für das Beihilfenaequivalent

        ShortBeihilfenaequivalent
        Control0..1
        TypeExtension(Beihilfenaequivalent) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        32. ClaimResponse.extension:ForderungsbetragAuslaenderverrechnungRegress
        Slice NameForderungsbetragAuslaenderverrechnungRegress
        Definition

        MOPED Extension für den Forderungsbetrag für Ausländerverrechnung oder Regress

        ShortForderungsbetrag für Auslaenderverrechnung oder Regress
        Control0..1
        TypeExtension(Forderungsbetrag für Auslaenderverrechnung oder Regress) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        34. ClaimResponse.extension:RechnungsnummerKHLGF
        Slice NameRechnungsnummerKHLGF
        Definition

        MOPED Extension für die Rechnungsnummer der Krankenanstalt bzw. des Landesgesundheitsfonds

        ShortRechnungsnummer der Krankenanstalt bzw. des Landesgesundheitsfonds
        Control0..1
        TypeExtension(Rechnungsnummer der Krankenanstalt bzw. des Landesgesundheitsfonds) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        36. ClaimResponse.extension:Note
        Slice NameNote
        Definition

        Additional notes that apply to this resource or element.

        ShortAdditional notes that apply to this resource or element.
        Comments

        This extension SHALL NOT be used if the resource already has standard 'note' element (or equivalent) of type Annotation on the same element

        Control0..*
        TypeExtension(Note) (Extension Type: Annotation)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        38. ClaimResponse.extension:Sonderleistungsnummer
        Slice NameSonderleistungsnummer
        Definition

        MOPED Extension für die Sonderleistungsnummer

        ShortSonderleistungsnummer
        Control0..1
        TypeExtension(Sonderleistungsnummer) (Extension Type: Coding)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        40. ClaimResponse.extension:AnzahlSonderleistungen
        Slice NameAnzahlSonderleistungen
        Definition

        MOPED Extension für die Anzahl der Sonderleistungen

        ShortAnzahl Sonderleistungen
        Control0..1
        TypeExtension(Anzahl Sonderleistungen) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        42. ClaimResponse.extension:PunkteLDFPauschale
        Slice NamePunkteLDFPauschale
        Definition

        MOPED Extension für die LDF Punkte Pauschale

        ShortPunkte LDF Pauschale
        Control0..1
        TypeExtension(Punkte LDF Pauschale) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        44. ClaimResponse.extension:KonstenmeldungARK
        Slice NameKonstenmeldungARK
        Definition

        MOPED Extension für die Kostenmeldung. Konstenmeldung für A = Ausländerverrechnung, R = Regressangelegenheiten oder K = Kosteninformation

        ShortKostenmeldung für (A/R/K)
        Control0..1
        TypeExtension(Kostenmeldung für (A/R/K)) (Extension Type: Coding)
        Is Modifierfalse
        Must Supportfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        46. ClaimResponse.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Must Supportfalse
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        48. ClaimResponse.identifier
        Definition

        A unique identifier assigned to this claim response.

        ShortBusiness Identifier for a claim response
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        Allows claim responses to be distinguished and referenced.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. ClaimResponse.traceNumber
        Definition

        Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

        ShortNumber for tracking
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        Allows partners to uniquely identify components for tracking.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        52. ClaimResponse.status
        Definition

        The status of the resource instance.

        Shortactive | cancelled | draft | entered-in-error
        Comments

        This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

        Control1..1
        BindingThe codes SHALL be taken from FinancialResourceStatusCodes
        (required to http://hl7.org/fhir/ValueSet/fm-status|5.0.0)

        A code specifying the state of the resource instance.

        Typecode
        Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summarytrue
        Requirements

        Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

        Pattern Valueactive
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. ClaimResponse.type
        Definition

        A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

        ShortMore granular claim type
        Comments

        This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

        Control1..1
        BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodes
        (extensible to http://hl7.org/fhir/ValueSet/claim-type)

        The type or discipline-style of the claim.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Requirements

        Some jurisdictions need a finer grained claim type for routing and adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. ClaimResponse.type.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        This element is affected by the following invariants: ele-1
        Typeid
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        58. ClaimResponse.type.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on ClaimResponse.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 60. ClaimResponse.type.coding
          Definition

          A reference to a code defined by a terminology system.

          ShortCode defined by a terminology system
          Comments

          Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

          Control0..*
          TypeCoding
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows for alternative encodings within a code system, and translations to other code systems.

          Pattern Value{
            "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
            "code" : "institutional"
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. ClaimResponse.type.text
          Definition

          A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

          ShortPlain text representation of the concept
          Comments

          Very often the text is the same as a displayName of one of the codings.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          64. ClaimResponse.subType
          Definition

          A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

          ShortMore granular claim type
          Comments

          This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

          Control0..1
          BindingFor example codes, see ExampleClaimSubTypeCodes
          (example to http://hl7.org/fhir/ValueSet/claim-subtype)

          A more granular claim typecode.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Some jurisdictions need a finer grained claim type for routing and adjudication.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          66. ClaimResponse.use
          Definition

          A code to indicate whether the nature of the request is: Claim - A request to an Insurer to adjudicate the supplied charges for health care goods and services under the identified policy and to pay the determined Benefit amount, if any; Preauthorization - A request to an Insurer to adjudicate the supplied proposed future charges for health care goods and services under the identified policy and to approve the services and provide the expected benefit amounts and potentially to reserve funds to pay the benefits when Claims for the indicated services are later submitted; or, Pre-determination - A request to an Insurer to adjudicate the supplied 'what if' charges for health care goods and services under the identified policy and report back what the Benefit payable would be had the services actually been provided.

          Shortclaim | preauthorization | predetermination
          Control1..1
          BindingThe codes SHALL be taken from Use
          (required to http://hl7.org/fhir/ValueSet/claim-use|5.0.0)

          Claim, preauthorization, predetermination.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Requirements

          This element is required to understand the nature of the request for adjudication.

          Pattern Valueclaim
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          68. ClaimResponse.patient
          Definition

          The party to whom the professional services and/or products have been supplied or are being considered and for whom actual for facast reimbursement is sought.

          ShortThe recipient of the products and services
          Control1..1
          TypeReference(HL7® AT Core Patient Profile)
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          The patient must be supplied to the insurer so that confirmation of coverage and service hstory may be considered as part of the authorization and/or adjudiction.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          70. ClaimResponse.created
          Definition

          The date this resource was created.

          ShortResponse creation date
          Control1..1
          TypedateTime
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Requirements

          Need to record a timestamp for use by both the recipient and the issuer.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          72. ClaimResponse.insurer
          Definition

          The party responsible for authorization, adjudication and reimbursement.

          ShortParty responsible for reimbursement
          Control1..1
          TypeReference(HL7® AT Core Organization Profile)
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          To be a valid claim, preauthorization or predetermination there must be a party who is responsible for adjudicating the contents against a policy which provides benefits for the patient.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          74. ClaimResponse.requestor
          Definition

          The provider which is responsible for the claim, predetermination or preauthorization.

          ShortParty responsible for the claim
          Comments

          Typically this field would be 1..1 where this party is accountable for the data content within the claim but is not necessarily the facility, provider group or practitioner who provided the products and services listed within this claim resource. This field is the Billing Provider, for example, a facility, provider group, lab or practitioner..

          Control1..1
          TypeReference(HL7® AT Core Organization Profile)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          76. ClaimResponse.request
          Definition

          Original request resource reference.

          ShortId of resource triggering adjudication
          Control1..1
          TypeReference(MOPED LKFRequest)
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          78. ClaimResponse.outcome
          Definition

          The outcome of the claim, predetermination, or preauthorization processing.

          Shortqueued | complete | error | partial
          Comments

          The resource may be used to indicate that the Claim/Preauthorization/Pre-determination has been received but processing has not begun (queued); that it has been processed and one or more errors have been detected (error); no errors were detected and some of the adjudication processing has been performed (partial); or all of the adjudication processing has completed without errors (complete).

          Control1..1
          BindingThe codes SHALL be taken from ClaimProcessingCodes
          (required to http://hl7.org/fhir/ValueSet/claim-outcome|5.0.0)

          The result of the claim processing.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Requirements

          To advise the requestor of an overall processing outcome.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          80. ClaimResponse.decision
          Definition

          The result of the claim, predetermination, or preauthorization adjudication.

          ShortResult of the adjudication
          Comments

          The element is used to indicate the current state of the adjudication overall for the claim resource, for example: the request has been held (pended) for adjudication processing, for manual review or other reasons; that it has been processed and will be paid, or the outstanding paid, as submitted (approved); that no amount will be paid (denied); or that some amount between zero and the submitted amount will be paid (partial).

          Control0..1
          BindingFor example codes, see ClaimAdjudicationDecisionsCodes
          (example to http://hl7.org/fhir/ValueSet/claim-decision)

          The overall result of the claim adjudication.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          To advise the requestor of the result of the adjudication process.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          82. ClaimResponse.disposition
          Definition

          A human readable description of the status of the adjudication.

          ShortDisposition Message
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provided for user display.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          84. ClaimResponse.preAuthRef
          Definition

          Reference from the Insurer which is used in later communications which refers to this adjudication.

          ShortPreauthorization reference
          Comments

          This value is only present on preauthorization adjudications.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          On subsequent claims, the insurer may require the provider to quote this value.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          86. ClaimResponse.preAuthPeriod
          Definition

          The time frame during which this authorization is effective.

          ShortPreauthorization reference effective period
          Control0..1
          TypePeriod
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          To convey to the provider when the authorized products and services must be supplied for the authorized adjudication to apply.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          88. ClaimResponse.event
          Definition

          Information code for an event with a corresponding date or period.

          ShortEvent information
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          90. ClaimResponse.event.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          92. ClaimResponse.event.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          94. ClaimResponse.event.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          96. ClaimResponse.event.type
          Definition

          A coded event such as when a service is expected or a card printed.

          ShortSpecific event
          Control1..1
          BindingFor example codes, see DatesTypeCodes
          (example to http://hl7.org/fhir/ValueSet/datestype)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          98. ClaimResponse.event.when[x]
          Definition

          A date or period in the past or future indicating when the event occurred or is expectd to occur.

          ShortOccurance date or period
          Control1..1
          TypeChoice of: dateTime, Period
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          100. ClaimResponse.payeeType
          Definition

          Type of Party to be reimbursed: subscriber, provider, other.

          ShortParty to be paid any benefits payable
          Control0..1
          BindingFor example codes, see ClaimPayeeTypeCodes
          (example to http://hl7.org/fhir/ValueSet/payeetype)

          A code for the party to be reimbursed.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Need to know who should receive payment with the most common situations being the Provider (assignment of benefits) or the Subscriber.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          102. ClaimResponse.encounter
          Definition

          Healthcare encounters related to this claim.

          ShortEncounters associated with the listed treatments
          Comments

          This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

          Control0..*
          TypeReference(Encounter)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Used in some jurisdictions to link clinical events to claim items.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          104. ClaimResponse.diagnosisRelatedGroup
          Definition

          A package billing code or bundle code used to group products and services to a particular health condition (such as heart attack) which is based on a predetermined grouping code system.

          Short"Abrechnung - Gruppe:" Dieses Datenfeld ist mit der Codenummer der zutreffenden Abrechnungsgruppe zu befüllen. Bei Datensätzen von stationären Krankenhausaufenthalten, die keiner leistungsorientier- ten Diagnosenfallgruppe zugeordnet werden, erfolgt ein Eintrag entsprechend der jeweiligen Aufnahmeart.
          Comments

          For example DRG (Diagnosis Related Group) or a bundled billing code. A patient may have a diagnosis of a Myocardial Infarction and a DRG for HeartAttack would be assigned. The Claim item (and possible subsequent claims) would refer to the DRG for those line items that were for services related to the heart attack event.

          Control0..1
          BindingThe codes SHALL be taken from LKF Abrechnungsgruppe
          (required to https://elga.moped.at/ValueSet/LKFAbrechnungsGruppe)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Required to relate the current diagnosis to a package billing code that is then referenced on the individual claim items which are specific to the health condition covered by the package code.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          106. ClaimResponse.item
          Definition

          A claim line. Either a simple (a product or service) or a 'group' of details which can also be a simple items or groups of sub-details.

          ShortAdjudication for claim line items
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          The adjudication for items provided on the claim.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          108. ClaimResponse.item.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          110. ClaimResponse.item.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          112. ClaimResponse.item.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          114. ClaimResponse.item.itemSequence
          Definition

          A number to uniquely reference the claim item entries.

          ShortClaim item instance identifier
          Control1..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Necessary to provide a mechanism to link the adjudication result to the submitted claim item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          116. ClaimResponse.item.traceNumber
          Definition

          Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

          ShortNumber for tracking
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Allows partners to uniquely identify components for tracking.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          118. ClaimResponse.item.noteNumber
          Definition

          The numbers associated with notes below which apply to the adjudication of this item.

          ShortApplicable note numbers
          Control0..*
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          120. ClaimResponse.item.reviewOutcome
          Definition

          The high-level results of the adjudication if adjudication has been performed.

          ShortAdjudication results
          Control0..1
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          122. ClaimResponse.item.reviewOutcome.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          124. ClaimResponse.item.reviewOutcome.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          126. ClaimResponse.item.reviewOutcome.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          128. ClaimResponse.item.reviewOutcome.decision
          Definition

          The result of the claim, predetermination, or preauthorization adjudication.

          ShortResult of the adjudication
          Comments

          The element is used to indicate the current state of the adjudication overall for the claim resource, for example: the request has been held (pended) for adjudication processing, for manual review or other reasons; that it has been processed and will be paid, or the outstanding paid, as submitted (approved); that no amount will be paid (denied); or that some amount between zero and the submitted amount will be paid (partial).

          Control0..1
          BindingFor example codes, see ClaimAdjudicationDecisionsCodes
          (example to http://hl7.org/fhir/ValueSet/claim-decision)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          To advise the requestor of the result of the adjudication process.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          130. ClaimResponse.item.reviewOutcome.reason
          Definition

          The reasons for the result of the claim, predetermination, or preauthorization adjudication.

          ShortReason for result of the adjudication
          Control0..*
          BindingFor example codes, see ClaimAdjudicationDecisionReasonCodes
          (example to http://hl7.org/fhir/ValueSet/claim-decision-reason)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          To advise the requestor of the contributors to the result of the adjudication process.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          132. ClaimResponse.item.reviewOutcome.preAuthRef
          Definition

          Reference from the Insurer which is used in later communications which refers to this adjudication.

          ShortPreauthorization reference
          Comments

          This value is only present on preauthorization adjudications.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          On subsequent claims, the insurer may require the provider to quote this value.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          134. ClaimResponse.item.reviewOutcome.preAuthPeriod
          Definition

          The time frame during which this authorization is effective.

          ShortPreauthorization reference effective period
          Control0..1
          TypePeriod
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          To convey to the provider when the authorized products and services must be supplied for the authorized adjudication to apply.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          136. ClaimResponse.item.adjudication
          Definition

          If this item is a group then the values here are a summary of the adjudication of the detail items. If this item is a simple product or service then this is the result of the adjudication of this item.

          ShortAdjudication details
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          The adjudication results conveys the insurer's assessment of the item provided in the claim under the terms of the patient's insurance coverage.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          138. ClaimResponse.item.adjudication.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          140. ClaimResponse.item.adjudication.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          142. ClaimResponse.item.adjudication.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          144. ClaimResponse.item.adjudication.category
          Definition

          A code to indicate the information type of this adjudication record. Information types may include the value submitted, maximum values or percentages allowed or payable under the plan, amounts that: the patient is responsible for in aggregate or pertaining to this item; amounts paid by other coverages; and, the benefit payable for this item.

          ShortType of adjudication information
          Comments

          For example codes indicating: Co-Pay, deductible, eligible, benefit, tax, etc.

          Control1..1
          BindingFor example codes, see AdjudicationValueCodes
          (example to http://hl7.org/fhir/ValueSet/adjudication)

          The adjudication codes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Needed to enable understanding of the context of the other information in the adjudication.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          146. ClaimResponse.item.adjudication.reason
          Definition

          A code supporting the understanding of the adjudication result and explaining variance from expected amount.

          ShortExplanation of adjudication outcome
          Comments

          For example may indicate that the funds for this benefit type have been exhausted.

          Control0..1
          BindingFor example codes, see AdjudicationReasonCodes
          (example to http://hl7.org/fhir/ValueSet/adjudication-reason)

          The adjudication reason codes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          To support understanding of variance from adjudication expectations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          148. ClaimResponse.item.adjudication.amount
          Definition

          Monetary amount associated with the category.

          ShortMonetary amount
          Comments

          For example: amount submitted, eligible amount, co-payment, and benefit payable.

          Control0..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Most adjudication categories convey a monetary amount.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          150. ClaimResponse.item.adjudication.quantity
          Definition

          A non-monetary value associated with the category. Mutually exclusive to the amount element above.

          ShortNon-monetary value
          Comments

          For example: eligible percentage or co-payment percentage.

          Control0..1
          TypeQuantity
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Some adjudication categories convey a percentage or a fixed value.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          152. ClaimResponse.item.detail
          Definition

          A claim detail. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

          ShortAdjudication for claim details
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          The adjudication for details provided on the claim.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          154. ClaimResponse.item.detail.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          156. ClaimResponse.item.detail.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          158. ClaimResponse.item.detail.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          160. ClaimResponse.item.detail.detailSequence
          Definition

          A number to uniquely reference the claim detail entry.

          ShortClaim detail instance identifier
          Control1..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Necessary to provide a mechanism to link the adjudication result to the submitted claim detail.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          162. ClaimResponse.item.detail.traceNumber
          Definition

          Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

          ShortNumber for tracking
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Allows partners to uniquely identify components for tracking.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          164. ClaimResponse.item.detail.noteNumber
          Definition

          The numbers associated with notes below which apply to the adjudication of this item.

          ShortApplicable note numbers
          Control0..*
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          166. ClaimResponse.item.detail.reviewOutcome
          Definition

          The high-level results of the adjudication if adjudication has been performed.

          ShortDetail level adjudication results
          Control0..1
          TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          168. ClaimResponse.item.detail.adjudication
          Definition

          The adjudication results.

          ShortDetail level adjudication details
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          170. ClaimResponse.item.detail.subDetail
          Definition

          A sub-detail adjudication of a simple product or service.

          ShortAdjudication for claim sub-details
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          The adjudication for sub-details provided on the claim.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          172. ClaimResponse.item.detail.subDetail.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          174. ClaimResponse.item.detail.subDetail.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          176. ClaimResponse.item.detail.subDetail.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          178. ClaimResponse.item.detail.subDetail.subDetailSequence
          Definition

          A number to uniquely reference the claim sub-detail entry.

          ShortClaim sub-detail instance identifier
          Control1..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Necessary to provide a mechanism to link the adjudication result to the submitted claim sub-detail.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          180. ClaimResponse.item.detail.subDetail.traceNumber
          Definition

          Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

          ShortNumber for tracking
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Allows partners to uniquely identify components for tracking.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          182. ClaimResponse.item.detail.subDetail.noteNumber
          Definition

          The numbers associated with notes below which apply to the adjudication of this item.

          ShortApplicable note numbers
          Control0..*
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          184. ClaimResponse.item.detail.subDetail.reviewOutcome
          Definition

          The high-level results of the adjudication if adjudication has been performed.

          ShortSubdetail level adjudication results
          Control0..1
          TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          186. ClaimResponse.item.detail.subDetail.adjudication
          Definition

          The adjudication results.

          ShortSubdetail level adjudication details
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          188. ClaimResponse.addItem
          Definition

          The first-tier service adjudications for payor added product or service lines.

          ShortInsurer added line items
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Insurers may redefine the provided product or service or may package and/or decompose groups of products and services. The addItems allows the insurer to provide their line item list with linkage to the submitted items/details/sub-details. In a preauthorization the insurer may use the addItem structure to provide additional information on authorized products and services.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          190. ClaimResponse.addItem.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          192. ClaimResponse.addItem.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          194. ClaimResponse.addItem.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          196. ClaimResponse.addItem.itemSequence
          Definition

          Claim items which this service line is intended to replace.

          ShortItem sequence number
          Control0..*
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides references to the claim items.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          198. ClaimResponse.addItem.detailSequence
          Definition

          The sequence number of the details within the claim item which this line is intended to replace.

          ShortDetail sequence number
          Control0..*
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides references to the claim details within the claim item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          200. ClaimResponse.addItem.subdetailSequence
          Definition

          The sequence number of the sub-details within the details within the claim item which this line is intended to replace.

          ShortSubdetail sequence number
          Control0..*
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides references to the claim sub-details within the claim detail.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          202. ClaimResponse.addItem.traceNumber
          Definition

          Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

          ShortNumber for tracking
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Allows partners to uniquely identify components for tracking.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          204. ClaimResponse.addItem.provider
          Definition

          The providers who are authorized for the services rendered to the patient.

          ShortAuthorized providers
          Control0..*
          TypeReference(Practitioner, PractitionerRole, Organization)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Insurer may provide authorization specifically to a restricted set of providers rather than an open authorization.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          206. ClaimResponse.addItem.revenue
          Definition

          The type of revenue or cost center providing the product and/or service.

          ShortRevenue or cost center code
          Control0..1
          BindingFor example codes, see ExampleRevenueCenterCodes
          (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

          Codes for the revenue or cost centers supplying the service and/or products.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Needed in the processing of institutional claims.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          208. ClaimResponse.addItem.productOrService
          Definition

          When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

          ShortBilling, service, product, or drug code
          Comments

          If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

          Control0..1
          BindingFor example codes, see USCLSCodes
          (example to http://hl7.org/fhir/ValueSet/service-uscls)

          Allowable service and product codes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Necessary to state what was provided or done.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          210. ClaimResponse.addItem.productOrServiceEnd
          Definition

          This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

          ShortEnd of a range of codes
          Control0..1
          BindingFor example codes, see USCLSCodes
          (example to http://hl7.org/fhir/ValueSet/service-uscls)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          212. ClaimResponse.addItem.request
          Definition

          Request or Referral for Goods or Service to be rendered.

          ShortRequest or Referral for Service
          Control0..*
          TypeReference(DeviceRequest, MedicationRequest, NutritionOrder, ServiceRequest, SupplyRequest, VisionPrescription)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          May identify the service to be provided or provider authorization for the service.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          214. ClaimResponse.addItem.modifier
          Definition

          Item typification or modifiers codes to convey additional context for the product or service.

          ShortService/Product billing modifiers
          Comments

          For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

          Control0..*
          BindingFor example codes, see ModifierTypeCodes
          (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

          Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          To support inclusion of the item for adjudication or to charge an elevated fee.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          216. ClaimResponse.addItem.programCode
          Definition

          Identifies the program under which this may be recovered.

          ShortProgram the product or service is provided under
          Comments

          For example: Neonatal program, child dental program or drug users recovery program.

          Control0..*
          BindingFor example codes, see ExampleProgramReasonCodes
          (example to http://hl7.org/fhir/ValueSet/ex-program-code)

          Program specific reason codes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          218. ClaimResponse.addItem.serviced[x]
          Definition

          The date or dates when the service or product was supplied, performed or completed.

          ShortDate or dates of service or product delivery
          Control0..1
          TypeChoice of: date, Period
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Needed to determine whether the service or product was provided during the term of the insurance coverage.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          220. ClaimResponse.addItem.location[x]
          Definition

          Where the product or service was provided.

          ShortPlace of service or where product was supplied
          Control0..1
          BindingFor example codes, see ExampleServicePlaceCodes
          (example to http://hl7.org/fhir/ValueSet/service-place)

          Place of service: pharmacy, school, prison, etc.

          TypeChoice of: CodeableConcept, Address, Reference(Location)
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          The location can alter whether the item was acceptable for insurance purposes or impact the determination of the benefit amount.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          222. ClaimResponse.addItem.quantity
          Definition

          The number of repetitions of a service or product.

          ShortCount of products or services
          Control0..1
          TypeQuantity(SimpleQuantity)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Required when the product or service code does not convey the quantity provided.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          224. ClaimResponse.addItem.unitPrice
          Definition

          If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

          ShortFee, charge or cost per item
          Control0..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          The amount charged to the patient by the provider for a single unit.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          226. ClaimResponse.addItem.factor
          Definition

          A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

          ShortPrice scaling factor
          Comments

          To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          228. ClaimResponse.addItem.tax
          Definition

          The total of taxes applicable for this product or service.

          ShortTotal tax
          Control0..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Required when taxes are not embedded in the unit price or provided as a separate service.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          230. ClaimResponse.addItem.net
          Definition

          The total amount claimed for the group (if a grouper) or the addItem. Net = unit price * quantity * factor.

          ShortTotal item cost
          Comments

          For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

          Control0..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides the total amount claimed for the group (if a grouper) or the line item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          232. ClaimResponse.addItem.bodySite
          Definition

          Physical location where the service is performed or applies.

          ShortAnatomical location
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          234. ClaimResponse.addItem.bodySite.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          236. ClaimResponse.addItem.bodySite.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          238. ClaimResponse.addItem.bodySite.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          240. ClaimResponse.addItem.bodySite.site
          Definition

          Physical service site on the patient (limb, tooth, etc.).

          ShortLocation
          Comments

          For example: Providing a tooth code allows an insurer to identify a provider performing a filling on a tooth that was previously removed.

          Control1..*
          BindingFor example codes, see OralSiteCodes
          (example to http://hl7.org/fhir/ValueSet/tooth)
          TypeCodeableReference(BodyStructure)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Allows insurer to validate specific procedures.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          242. ClaimResponse.addItem.bodySite.subSite
          Definition

          A region or surface of the bodySite, e.g. limb region or tooth surface(s).

          ShortSub-location
          Control0..*
          BindingFor example codes, see SurfaceCodes
          (example to http://hl7.org/fhir/ValueSet/surface)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Allows insurer to validate specific procedures.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          244. ClaimResponse.addItem.noteNumber
          Definition

          The numbers associated with notes below which apply to the adjudication of this item.

          ShortApplicable note numbers
          Control0..*
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          246. ClaimResponse.addItem.reviewOutcome
          Definition

          The high-level results of the adjudication if adjudication has been performed.

          ShortAdded items adjudication results
          Control0..1
          TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          248. ClaimResponse.addItem.adjudication
          Definition

          The adjudication results.

          ShortAdded items adjudication
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          250. ClaimResponse.addItem.detail
          Definition

          The second-tier service adjudications for payor added services.

          ShortInsurer added line details
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          252. ClaimResponse.addItem.detail.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          254. ClaimResponse.addItem.detail.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          256. ClaimResponse.addItem.detail.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          258. ClaimResponse.addItem.detail.traceNumber
          Definition

          Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

          ShortNumber for tracking
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Allows partners to uniquely identify components for tracking.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          260. ClaimResponse.addItem.detail.revenue
          Definition

          The type of revenue or cost center providing the product and/or service.

          ShortRevenue or cost center code
          Control0..1
          BindingFor example codes, see ExampleRevenueCenterCodes
          (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

          Codes for the revenue or cost centers supplying the service and/or products.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Needed in the processing of institutional claims.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          262. ClaimResponse.addItem.detail.productOrService
          Definition

          When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

          ShortBilling, service, product, or drug code
          Comments

          If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

          Control0..1
          BindingFor example codes, see USCLSCodes
          (example to http://hl7.org/fhir/ValueSet/service-uscls)

          Allowable service and product codes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Necessary to state what was provided or done.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          264. ClaimResponse.addItem.detail.productOrServiceEnd
          Definition

          This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

          ShortEnd of a range of codes
          Control0..1
          BindingFor example codes, see USCLSCodes
          (example to http://hl7.org/fhir/ValueSet/service-uscls)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          266. ClaimResponse.addItem.detail.modifier
          Definition

          Item typification or modifiers codes to convey additional context for the product or service.

          ShortService/Product billing modifiers
          Comments

          For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

          Control0..*
          BindingFor example codes, see ModifierTypeCodes
          (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

          Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          To support inclusion of the item for adjudication or to charge an elevated fee.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          268. ClaimResponse.addItem.detail.quantity
          Definition

          The number of repetitions of a service or product.

          ShortCount of products or services
          Control0..1
          TypeQuantity(SimpleQuantity)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Required when the product or service code does not convey the quantity provided.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          270. ClaimResponse.addItem.detail.unitPrice
          Definition

          If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

          ShortFee, charge or cost per item
          Control0..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          The amount charged to the patient by the provider for a single unit.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          272. ClaimResponse.addItem.detail.factor
          Definition

          A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

          ShortPrice scaling factor
          Comments

          To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          274. ClaimResponse.addItem.detail.tax
          Definition

          The total of taxes applicable for this product or service.

          ShortTotal tax
          Control0..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Required when taxes are not embedded in the unit price or provided as a separate service.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          276. ClaimResponse.addItem.detail.net
          Definition

          The total amount claimed for the group (if a grouper) or the addItem.detail. Net = unit price * quantity * factor.

          ShortTotal item cost
          Comments

          For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

          Control0..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides the total amount claimed for the group (if a grouper) or the line item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          278. ClaimResponse.addItem.detail.noteNumber
          Definition

          The numbers associated with notes below which apply to the adjudication of this item.

          ShortApplicable note numbers
          Control0..*
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          280. ClaimResponse.addItem.detail.reviewOutcome
          Definition

          The high-level results of the adjudication if adjudication has been performed.

          ShortAdded items detail level adjudication results
          Control0..1
          TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          282. ClaimResponse.addItem.detail.adjudication
          Definition

          The adjudication results.

          ShortAdded items detail adjudication
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          284. ClaimResponse.addItem.detail.subDetail
          Definition

          The third-tier service adjudications for payor added services.

          ShortInsurer added line items
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          286. ClaimResponse.addItem.detail.subDetail.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          288. ClaimResponse.addItem.detail.subDetail.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          290. ClaimResponse.addItem.detail.subDetail.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          292. ClaimResponse.addItem.detail.subDetail.traceNumber
          Definition

          Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

          ShortNumber for tracking
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Allows partners to uniquely identify components for tracking.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          294. ClaimResponse.addItem.detail.subDetail.revenue
          Definition

          The type of revenue or cost center providing the product and/or service.

          ShortRevenue or cost center code
          Control0..1
          BindingFor example codes, see ExampleRevenueCenterCodes
          (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

          Codes for the revenue or cost centers supplying the service and/or products.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Needed in the processing of institutional claims.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          296. ClaimResponse.addItem.detail.subDetail.productOrService
          Definition

          When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

          ShortBilling, service, product, or drug code
          Comments

          If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

          Control0..1
          BindingFor example codes, see USCLSCodes
          (example to http://hl7.org/fhir/ValueSet/service-uscls)

          Allowable service and product codes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Necessary to state what was provided or done.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          298. ClaimResponse.addItem.detail.subDetail.productOrServiceEnd
          Definition

          This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

          ShortEnd of a range of codes
          Control0..1
          BindingFor example codes, see USCLSCodes
          (example to http://hl7.org/fhir/ValueSet/service-uscls)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          300. ClaimResponse.addItem.detail.subDetail.modifier
          Definition

          Item typification or modifiers codes to convey additional context for the product or service.

          ShortService/Product billing modifiers
          Comments

          For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

          Control0..*
          BindingFor example codes, see ModifierTypeCodes
          (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

          Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          To support inclusion of the item for adjudication or to charge an elevated fee.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          302. ClaimResponse.addItem.detail.subDetail.quantity
          Definition

          The number of repetitions of a service or product.

          ShortCount of products or services
          Control0..1
          TypeQuantity(SimpleQuantity)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Required when the product or service code does not convey the quantity provided.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          304. ClaimResponse.addItem.detail.subDetail.unitPrice
          Definition

          If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

          ShortFee, charge or cost per item
          Control0..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          The amount charged to the patient by the provider for a single unit.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          306. ClaimResponse.addItem.detail.subDetail.factor
          Definition

          A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

          ShortPrice scaling factor
          Comments

          To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          308. ClaimResponse.addItem.detail.subDetail.tax
          Definition

          The total of taxes applicable for this product or service.

          ShortTotal tax
          Control0..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Required when taxes are not embedded in the unit price or provided as a separate service.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          310. ClaimResponse.addItem.detail.subDetail.net
          Definition

          The total amount claimed for the addItem.detail.subDetail. Net = unit price * quantity * factor.

          ShortTotal item cost
          Comments

          For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

          Control0..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides the total amount claimed for the group (if a grouper) or the line item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          312. ClaimResponse.addItem.detail.subDetail.noteNumber
          Definition

          The numbers associated with notes below which apply to the adjudication of this item.

          ShortApplicable note numbers
          Control0..*
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          314. ClaimResponse.addItem.detail.subDetail.reviewOutcome
          Definition

          The high-level results of the adjudication if adjudication has been performed.

          ShortAdded items subdetail level adjudication results
          Control0..1
          TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          316. ClaimResponse.addItem.detail.subDetail.adjudication
          Definition

          The adjudication results.

          ShortAdded items subdetail adjudication
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          318. ClaimResponse.adjudication
          Definition

          The adjudication results which are presented at the header level rather than at the line-item or add-item levels.

          ShortHeader-level adjudication
          Control0..*
          TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Some insurers will receive line-items but provide the adjudication only at a summary or header-level.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          320. ClaimResponse.total
          Definition

          Categorized monetary totals for the adjudication.

          ShortAdjudication totals
          Comments

          Totals for amounts submitted, co-pays, benefits payable etc.

          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          To provide the requestor with financial totals by category for the adjudication.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          322. ClaimResponse.total.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          324. ClaimResponse.total.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          326. ClaimResponse.total.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          328. ClaimResponse.total.category
          Definition

          A code to indicate the information type of this adjudication record. Information types may include: the value submitted, maximum values or percentages allowed or payable under the plan, amounts that the patient is responsible for in aggregate or pertaining to this item, amounts paid by other coverages, and the benefit payable for this item.

          ShortType of adjudication information
          Comments

          For example codes indicating: Co-Pay, deductible, eligible, benefit, tax, etc.

          Control1..1
          BindingFor example codes, see AdjudicationValueCodes
          (example to http://hl7.org/fhir/ValueSet/adjudication)

          The adjudication codes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          Needed to convey the type of total provided.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          330. ClaimResponse.total.amount
          Definition

          Monetary total amount associated with the category.

          ShortFinancial total for the category
          Control1..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          Needed to convey the total monetary amount.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          332. ClaimResponse.payment
          Definition

          Payment details for the adjudication of the claim.

          ShortPayment Details
          Control0..1
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Needed to convey references to the financial instrument that has been used if payment has been made.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          334. ClaimResponse.payment.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          336. ClaimResponse.payment.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          338. ClaimResponse.payment.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          340. ClaimResponse.payment.type
          Definition

          Whether this represents partial or complete payment of the benefits payable.

          ShortPartial or complete payment
          Control1..1
          BindingFor example codes, see ExamplePaymentTypeCodes
          (example to http://hl7.org/fhir/ValueSet/ex-paymenttype)

          The type (partial, complete) of the payment.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          To advise the requestor when the insurer believes all payments to have been completed.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          342. ClaimResponse.payment.adjustment
          Definition

          Total amount of all adjustments to this payment included in this transaction which are not related to this claim's adjudication.

          ShortPayment adjustment for non-claim issues
          Comments

          Insurers will deduct amounts owing from the provider (adjustment), such as a prior overpayment, from the amount owing to the provider (benefits payable) when payment is made to the provider.

          Control0..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          To advise the requestor of adjustments applied to the payment.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          344. ClaimResponse.payment.adjustmentReason
          Definition

          Reason for the payment adjustment.

          ShortExplanation for the adjustment
          Control0..1
          BindingFor example codes, see PaymentAdjustmentReasonCodes
          (example to http://hl7.org/fhir/ValueSet/payment-adjustment-reason)

          Payment Adjustment reason codes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Needed to clarify the monetary adjustment.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          346. ClaimResponse.payment.date
          Definition

          Estimated date the payment will be issued or the actual issue date of payment.

          ShortExpected date of payment
          Control0..1
          Typedate
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          To advise the payee when payment can be expected.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          348. ClaimResponse.payment.amount
          Definition

          Benefits payable less any payment adjustment.

          ShortPayable amount after adjustment
          Control1..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Needed to provide the actual payment amount.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          350. ClaimResponse.payment.identifier
          Definition

          Issuer's unique identifier for the payment instrument.

          ShortBusiness identifier for the payment
          Comments

          For example: EFT number or check number.

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1
          TypeIdentifier
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Enable the receiver to reconcile when payment received.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          352. ClaimResponse.fundsReserve
          Definition

          A code, used only on a response to a preauthorization, to indicate whether the benefits payable have been reserved and for whom.

          ShortFunds reserved status
          Comments

          Fund would be release by a future claim quoting the preAuthRef of this response. Examples of values include: provider, patient, none.

          Control0..1
          BindingFor example codes, see FundsReservationCodes
          (example to http://hl7.org/fhir/ValueSet/fundsreserve)

          For whom funds are to be reserved: (Patient, Provider, None).

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Needed to advise the submitting provider on whether the rquest for reservation of funds has been honored.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          354. ClaimResponse.formCode
          Definition

          A code for the form to be used for printing the content.

          ShortPrinted form identifier
          Comments

          May be needed to identify specific jurisdictional forms.

          Control0..1
          BindingFor example codes, see FormCodes
          (example to http://hl7.org/fhir/ValueSet/forms)

          The forms codes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Needed to specify the specific form used for producing output for this response.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          356. ClaimResponse.form
          Definition

          The actual form, by reference or inclusion, for printing the content or an EOB.

          ShortPrinted reference or actual form
          Comments

          Needed to permit insurers to include the actual form.

          Control0..1
          TypeAttachment
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Needed to include the specific form used for producing output for this response.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          358. ClaimResponse.processNote
          Definition

          A note that describes or explains adjudication results in a human readable form.

          ShortNote concerning adjudication
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides the insurer specific textual explanations associated with the processing.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          360. ClaimResponse.processNote.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          362. ClaimResponse.processNote.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          364. ClaimResponse.processNote.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          366. ClaimResponse.processNote.number
          Definition

          A number to uniquely identify a note entry.

          ShortNote instance identifier
          Control0..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Necessary to provide a mechanism to link from adjudications.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          368. ClaimResponse.processNote.type
          Definition

          The business purpose of the note text.

          ShortNote purpose
          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from NoteType
          (extensible to http://hl7.org/fhir/ValueSet/note-type)

          The presentation types of notes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          To convey the expectation for when the text is used.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          370. ClaimResponse.processNote.text
          Definition

          The explanation or description associated with the processing.

          ShortNote explanatory text
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Required to provide human readable explanation.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          372. ClaimResponse.processNote.language
          Definition

          A code to define the language used in the text of the note.

          ShortLanguage of the text
          Comments

          Only required if the language is different from the resource language.

          Control0..1
          BindingThe codes SHALL be taken from AllLanguages
          (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

          IETF language tag for a human language

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Note text may vary from the resource defined language.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          374. ClaimResponse.communicationRequest
          Definition

          Request for additional supporting or authorizing information.

          ShortRequest for additional information
          Comments

          For example: professional reports, documents, images, clinical resources, or accident reports.

          Control0..*
          TypeReference(CommunicationRequest)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Need to communicate insurer request for additional information required to support the adjudication.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          376. ClaimResponse.insurance
          Definition

          Financial instruments for reimbursement for the health care products and services specified on the claim.

          ShortPatient insurance information
          Comments

          All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          At least one insurer is required for a claim to be a claim.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          378. ClaimResponse.insurance.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          380. ClaimResponse.insurance.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          382. ClaimResponse.insurance.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          384. ClaimResponse.insurance.sequence
          Definition

          A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

          ShortInsurance instance identifier
          Control1..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          To maintain order of the coverages.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          386. ClaimResponse.insurance.focal
          Definition

          A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

          ShortCoverage to be used for adjudication
          Comments

          A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

          Control1..1
          Typeboolean
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          To identify which coverage in the list is being used to adjudicate this claim.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          388. ClaimResponse.insurance.coverage
          Definition

          Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

          ShortInsurance information
          Control1..1
          TypeReference(MOPED Coverage)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Required to allow the adjudicator to locate the correct policy and history within their information system.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          390. ClaimResponse.insurance.businessArrangement
          Definition

          A business agreement number established between the provider and the insurer for special business processing purposes.

          ShortAdditional provider contract number
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Providers may have multiple business arrangements with a given insurer and must supply the specific contract number for adjudication.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          392. ClaimResponse.insurance.claimResponse
          Definition

          The result of the adjudication of the line items for the Coverage specified in this insurance.

          ShortAdjudication results
          Comments

          Must not be specified when 'focal=true' for this insurance.

          Control0..1
          TypeReference(ClaimResponse)
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          An insurer need the adjudication results from prior insurers to determine the outstanding balance remaining by item for the items in the curent claim.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          394. ClaimResponse.error
          Definition

          Errors encountered during the processing of the adjudication.

          ShortProcessing errors
          Comments

          If the request contains errors then an error element should be provided and no adjudication related sections (item, addItem, or payment) should be present.

          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Need to communicate processing issues to the requestor.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          396. ClaimResponse.error.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          398. ClaimResponse.error.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          400. ClaimResponse.error.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          402. ClaimResponse.error.itemSequence
          Definition

          The sequence number of the line item submitted which contains the error. This value is omitted when the error occurs outside of the item structure.

          ShortItem sequence number
          Control0..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides references to the claim items.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          404. ClaimResponse.error.detailSequence
          Definition

          The sequence number of the detail within the line item submitted which contains the error. This value is omitted when the error occurs outside of the item structure.

          ShortDetail sequence number
          Control0..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides references to the claim details within the claim item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          406. ClaimResponse.error.subDetailSequence
          Definition

          The sequence number of the sub-detail within the detail within the line item submitted which contains the error. This value is omitted when the error occurs outside of the item structure.

          ShortSubdetail sequence number
          Control0..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides references to the claim sub-details within the claim detail.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          408. ClaimResponse.error.code
          Definition

          An error code, from a specified code system, which details why the claim could not be adjudicated.

          ShortError code detailing processing issues
          Control1..1
          BindingFor example codes, see AdjudicationErrorCodes
          (example to http://hl7.org/fhir/ValueSet/adjudication-error)

          The adjudication error codes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          Required to convey processing errors.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          410. ClaimResponse.error.expression
          Definition

          A simple subset of FHIRPath limited to element names, repetition indicators and the default child accessor that identifies one of the elements in the resource that caused this issue to be raised.

          ShortFHIRPath of element(s) related to issue
          Comments

          The root of the FHIRPath is the resource or bundle that generated OperationOutcome. Each FHIRPath SHALL resolve to a single node.

          Control0..*
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Requirements

          Allows systems to highlight or otherwise guide users to elements implicated in issues to allow them to be fixed more easily.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))