Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED)
0.1.0 - ci-build

Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED) - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: MopedVAERequest - Detailed Descriptions

Draft as of 2025-03-02

Definitions for the MopedVAERequest resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Claim
Definition

A provider issued list of professional services and products which have been provided, or are to be provided, to a patient which is sent to an insurer for reimbursement.

ShortClaim, Pre-determination or Pre-authorization
Comments

The Claim resource fulfills three information request requirements: Claim - a request for adjudication for reimbursement for products and/or services provided; Preauthorization - a request to authorize the future provision of products and/or services including an anticipated adjudication; and, Predetermination - a request for a non-bind adjudication of possible future products and/or services.

Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesAdjudication Request, Preauthorization Request, Predetermination Request
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Claim.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Claim.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. Claim.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Claim.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. Claim.extension:Verlaengerungstage
    Slice NameVerlaengerungstage
    Definition

    "Verlaengerungstage:"Anzahl der Verlaengerungstage bei Verlaengerung.

    ShortVerlaengerungstage
    Control0..1
    TypeExtension(Verlaengerungstage) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Claim.extension:Sonderklasse
    Slice NameSonderklasse
    Definition

    KLAS: Allgemeine Gebuehrenklasse bzw. Sonderklasse

    ShortKLAS: Allgemeine Gebuehrenklasse bzw. Sonderklasse
    Control0..1
    TypeExtension(Sonderklasse) (Extension Type: Coding)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Claim.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Must Supportfalse
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Claim.status
    Definition

    The status of the resource instance.

    Shortactive | cancelled | draft | entered-in-error
    Comments

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|5.0.0
    (required to http://hl7.org/fhir/ValueSet/fm-status|5.0.0)

    A code specifying the state of the resource instance.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Claim.type
    Definition

    The category of claim, e.g. oral, pharmacy, vision, institutional, professional.

    ShortCategory or discipline
    Comments

    The code system provides oral, pharmacy, vision, professional and institutional claim types. Those supported depends on the requirements of the jurisdiction. The valueset is extensible to accommodate other types of claims as required by the jurisdiction.

    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodeshttp://hl7.org/fhir/ValueSet/claim-type
    (extensible to http://hl7.org/fhir/ValueSet/claim-type)

    The type or discipline-style of the claim.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    Claim type determine the general sets of business rules applied for information requirements and adjudication.

    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
        "code" : "institutional"
      }]
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Claim.use
    Definition

    A code to indicate whether the nature of the request is: Claim - A request to an Insurer to adjudicate the supplied charges for health care goods and services under the identified policy and to pay the determined Benefit amount, if any; Preauthorization - A request to an Insurer to adjudicate the supplied proposed future charges for health care goods and services under the identified policy and to approve the services and provide the expected benefit amounts and potentially to reserve funds to pay the benefits when Claims for the indicated services are later submitted; or, Pre-determination - A request to an Insurer to adjudicate the supplied 'what if' charges for health care goods and services under the identified policy and report back what the Benefit payable would be had the services actually been provided.

    Shortclaim | preauthorization | predetermination
    Control1..1
    BindingThe codes SHALL be taken from Usehttp://hl7.org/fhir/ValueSet/claim-use|5.0.0
    (required to http://hl7.org/fhir/ValueSet/claim-use|5.0.0)

    The purpose of the Claim: predetermination, preauthorization, claim.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    This element is required to understand the nature of the request for adjudication.

    Pattern Valuepreauthorization
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Claim.patient
    Definition

    The party to whom the professional services and/or products have been supplied or are being considered and for whom actual or forecast reimbursement is sought.

    ShortThe recipient of the products and services
    Control1..1
    TypeReference(HL7® AT Core Patient Profile, Patient)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    The patient must be supplied to the insurer so that confirmation of coverage and service history may be considered as part of the authorization and/or adjudiction.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Claim.created
    Definition

    The date this resource was created.

    ShortResource creation date
    Comments

    This field is independent of the date of creation of the resource as it may reflect the creation date of a source document prior to digitization. Typically for claims all services must be completed as of this date.

    Control1..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    Need to record a timestamp for use by both the recipient and the issuer.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Claim.insurer
    Definition

    The Insurer who is target of the request.

    ShortTarget
    Control10..1
    TypeReference(HL7® AT Core Organization Profile, Organization)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Claim.provider
    Definition

    The provider which is responsible for the claim, predetermination or preauthorization.

    ShortParty responsible for the claim
    Comments

    Typically this field would be 1..1 where this party is accountable for the data content within the claim but is not necessarily the facility, provider group or practitioner who provided the products and services listed within this claim resource. This field is the Billing Provider, for example, a facility, provider group, lab or practitioner.

    Control10..1
    TypeReference(HL7® AT Core Organization Profile, Practitioner, PractitionerRole, Organization)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Claim.encounter
    Definition

    Healthcare encounters related to this claim.

    ShortEncounters associated with the listed treatments
    Comments

    This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

    Control10..*
    TypeReference(Encounter)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Requirements

    Used in some jurisdictions to link clinical events to claim items.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Claim.encounter. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • profile @ resolve()
    • 30. Claim.encounter:MopedEncounter
      Slice NameMopedEncounter
      Definition

      Healthcare encounters related to this claim.

      ShortGenerelle Informationen zu Aufnahme und Entlassung des PatientenEncounters associated with the listed treatments
      Comments

      This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

      Control10..1*
      TypeReference(MOPED Encounter, Encounter)
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Requirements

      Used in some jurisdictions to link clinical events to claim items.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Claim.encounter:TransferEncounter
      Slice NameTransferEncounter
      Definition

      Healthcare encounters related to this claim.

      ShortInformationen zu Verlegungen innerhalb oder zwischen KrankenanstaltenEncounters associated with the listed treatments
      Comments

      This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

      Control0..*
      TypeReference(MOPED TransferEncounter, Encounter)
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Requirements

      Used in some jurisdictions to link clinical events to claim items.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Claim.supportingInfo
      Definition

      Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

      ShortSupporting information
      Comments

      Often there are multiple jurisdiction specific valuesets which are required.

      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Requirements

      Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

      Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Claim.supportingInfo. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ code.coding
      • 36. Claim.supportingInfo.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        38. Claim.supportingInfo.sequence
        Definition

        A number to uniquely identify supporting information entries.

        ShortInformation instance identifier
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Requirements

        Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Claim.supportingInfo.category
        Definition

        The general class of the information supplied: information; exception; accident, employment; onset, etc.

        ShortClassification of the supplied information
        Comments

        This may contain a category for the local bill type codes.

        Control1..1
        BindingFor example codes, see ClaimInformationCategoryCodeshttp://hl7.org/fhir/ValueSet/claim-informationcategory
        (example to http://hl7.org/fhir/ValueSet/claim-informationcategory)

        The valuset used for additional information category codes.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Claim.supportingInfo:VerdachtFremdverschulden
        Slice NameVerdachtFremdverschulden
        Definition

        Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

        ShortVerdacht auf FremdversschludenSupporting information
        Comments

        Often there are multiple jurisdiction specific valuesets which are required.

        Control0..1*
        TypeBackboneElement
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

        Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Claim.supportingInfo:VerdachtFremdverschulden.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        46. Claim.supportingInfo:VerdachtFremdverschulden.sequence
        Definition

        A number to uniquely identify supporting information entries.

        ShortInformation instance identifier
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Requirements

        Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. Claim.supportingInfo:VerdachtFremdverschulden.category
        Definition

        The general class of the information supplied: information; exception; accident, employment; onset, etc.

        ShortClassification of the supplied information
        Comments

        This may contain a category for the local bill type codes.

        Control1..1
        BindingFor example codes, see ClaimInformationCategoryCodeshttp://hl7.org/fhir/ValueSet/claim-informationcategory
        (example to http://hl7.org/fhir/ValueSet/claim-informationcategory)

        The valuset used for additional information category codes.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

        Pattern Value{
          "coding" : [{
            "system" : "http://terminology.hl7.org/CodeSystem/claim-informationcategory",
            "code" : "info"
          }]
        }
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. Claim.supportingInfo:VerdachtFremdverschulden.value[x]
        Definition

        Additional data or information such as resources, documents, images etc. including references to the data or the actual inclusion of the data.

        ShortData to be provided
        Comments

        Could be used to provide references to other resources, document. For example could contain a PDF in an Attachment of the Police Report for an Accident.

        Control0..1
        Typeboolean, Identifier, string, Reference(Resource), Quantity, Attachment
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Requirements

        To convey the data content to be provided when the information is more than a simple code or period.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be found here

        0. Claim
        2. Claim.extension
        SlicingThis element introduces a set of slices on Claim.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 4. Claim.extension:Verlaengerungstage
          Slice NameVerlaengerungstage
          Control0..1
          TypeExtension(Verlaengerungstage) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
          6. Claim.extension:Sonderklasse
          Slice NameSonderklasse
          Control0..1
          TypeExtension(Sonderklasse) (Extension Type: Coding)
          8. Claim.type
          Pattern Value{
            "coding" : [{
              "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
              "code" : "institutional"
            }]
          }
          10. Claim.use
          Pattern Valuepreauthorization
          12. Claim.patient
          TypeReference(HL7® AT Core Patient Profile)
          14. Claim.insurer
          Control1..?
          TypeReference(HL7® AT Core Organization Profile)
          16. Claim.provider
          Control1..?
          TypeReference(HL7® AT Core Organization Profile)
          18. Claim.related
          20. Claim.related.claim
          TypeReference(MOPED VAERequest)
          22. Claim.encounter
          Control1..?
          SlicingThis element introduces a set of slices on Claim.encounter. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • profile @ resolve()
          • 24. Claim.encounter:MopedEncounter
            Slice NameMopedEncounter
            ShortGenerelle Informationen zu Aufnahme und Entlassung des Patienten
            Control1..1
            TypeReference(MOPED Encounter)
            26. Claim.encounter:TransferEncounter
            Slice NameTransferEncounter
            ShortInformationen zu Verlegungen innerhalb oder zwischen Krankenanstalten
            Control0..*
            TypeReference(MOPED TransferEncounter)
            28. Claim.supportingInfo
            SlicingThis element introduces a set of slices on Claim.supportingInfo. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ code.coding
            • 30. Claim.supportingInfo:VerdachtFremdverschulden
              Slice NameVerdachtFremdverschulden
              ShortVerdacht auf Fremdversschluden
              Control0..1
              32. Claim.supportingInfo:VerdachtFremdverschulden.category
              Pattern Value{
                "coding" : [{
                  "system" : "http://terminology.hl7.org/CodeSystem/claim-informationcategory",
                  "code" : "info"
                }]
              }
              34. Claim.supportingInfo:VerdachtFremdverschulden.code
              36. Claim.supportingInfo:VerdachtFremdverschulden.code.coding
              Control1..?
              Pattern Value{
                "system" : "https://elga.moped.at/CodeSystem/VAESupportingInformationTypesCS",
                "code" : "FREVER"
              }
              38. Claim.supportingInfo:VerdachtFremdverschulden.value[x]
              Typeboolean
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              40. Claim.diagnosis
              42. Claim.diagnosis.onAdmission
              Definition

              Gibt an ob die Diagnose bereits bei Aufnahme in den stationären Aufenthalt vorhanden war

              44. Claim.insurance
              46. Claim.insurance.coverage
              TypeReference(MOPED Coverage)
              48. Claim.accident
              50. Claim.accident.type
              BindingThe codes SHALL be taken from Verdacht auf Arbeits- oder Schuelerunfall ValueSet
              (required to https://elga.moped.at/ValueSet/VerdachtArbeitsSchuelerunfallVS)

              Guidance on how to interpret the contents of this table can be found here

              0. Claim
              Definition

              A provider issued list of professional services and products which have been provided, or are to be provided, to a patient which is sent to an insurer for reimbursement.

              ShortClaim, Pre-determination or Pre-authorization
              Comments

              The Claim resource fulfills three information request requirements: Claim - a request for adjudication for reimbursement for products and/or services provided; Preauthorization - a request to authorize the future provision of products and/or services including an anticipated adjudication; and, Predetermination - a request for a non-bind adjudication of possible future products and/or services.

              Control0..*
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate NamesAdjudication Request, Preauthorization Request, Predetermination Request
              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              2. Claim.id
              Definition

              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              ShortLogical id of this artifact
              Comments

              Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

              Control0..1
              Typeid
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              4. Claim.meta
              Definition

              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              ShortMetadata about the resource
              Control0..1
              TypeMeta
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. Claim.implicitRules
              Definition

              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

              ShortA set of rules under which this content was created
              Comments

              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

              Control0..1
              Typeuri
              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              8. Claim.language
              Definition

              The base language in which the resource is written.

              ShortLanguage of the resource content
              Comments

              Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

              Control0..1
              BindingThe codes SHALL be taken from AllLanguages
              (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

              IETF language tag for a human language

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              10. Claim.text
              Definition

              A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

              ShortText summary of the resource, for human interpretation
              Comments

              Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

              Control0..1
              This element is affected by the following invariants: dom-6
              TypeNarrative
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate Namesnarrative, html, xhtml, display
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              12. Claim.contained
              Definition

              These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

              ShortContained, inline Resources
              Comments

              This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

              Control0..*
              This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
              TypeResource
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate Namesinline resources, anonymous resources, contained resources
              14. Claim.extension
              Definition

              An Extension

              ShortExtension
              Control0..*
              TypeExtension
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Claim.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 16. Claim.extension:Verlaengerungstage
                Slice NameVerlaengerungstage
                Definition

                "Verlaengerungstage:"Anzahl der Verlaengerungstage bei Verlaengerung.

                ShortVerlaengerungstage
                Control0..1
                TypeExtension(Verlaengerungstage) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
                Is Modifierfalse
                Must Supportfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                18. Claim.extension:Sonderklasse
                Slice NameSonderklasse
                Definition

                KLAS: Allgemeine Gebuehrenklasse bzw. Sonderklasse

                ShortKLAS: Allgemeine Gebuehrenklasse bzw. Sonderklasse
                Control0..1
                TypeExtension(Sonderklasse) (Extension Type: Coding)
                Is Modifierfalse
                Must Supportfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                20. Claim.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                Must Supportfalse
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                22. Claim.identifier
                Definition

                A unique identifier assigned to this claim.

                ShortBusiness Identifier for claim
                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control0..*
                TypeIdentifier
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Allows claims to be distinguished and referenced.

                Alternate NamesClaim Number
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                24. Claim.traceNumber
                Definition

                Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                ShortNumber for tracking
                Control0..*
                TypeIdentifier
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Allows partners to uniquely identify components for tracking.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                26. Claim.status
                Definition

                The status of the resource instance.

                Shortactive | cancelled | draft | entered-in-error
                Comments

                This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

                Control1..1
                BindingThe codes SHALL be taken from FinancialResourceStatusCodes
                (required to http://hl7.org/fhir/ValueSet/fm-status|5.0.0)

                A code specifying the state of the resource instance.

                Typecode
                Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summarytrue
                Requirements

                Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                28. Claim.type
                Definition

                The category of claim, e.g. oral, pharmacy, vision, institutional, professional.

                ShortCategory or discipline
                Comments

                The code system provides oral, pharmacy, vision, professional and institutional claim types. Those supported depends on the requirements of the jurisdiction. The valueset is extensible to accommodate other types of claims as required by the jurisdiction.

                Control1..1
                BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodes
                (extensible to http://hl7.org/fhir/ValueSet/claim-type)

                The type or discipline-style of the claim.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Requirements

                Claim type determine the general sets of business rules applied for information requirements and adjudication.

                Pattern Value{
                  "coding" : [{
                    "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
                    "code" : "institutional"
                  }]
                }
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                30. Claim.subType
                Definition

                A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

                ShortMore granular claim type
                Comments

                This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

                Control0..1
                BindingFor example codes, see ExampleClaimSubTypeCodes
                (example to http://hl7.org/fhir/ValueSet/claim-subtype)

                A more granular claim typecode.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Some jurisdictions need a finer grained claim type for routing and adjudication.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                32. Claim.use
                Definition

                A code to indicate whether the nature of the request is: Claim - A request to an Insurer to adjudicate the supplied charges for health care goods and services under the identified policy and to pay the determined Benefit amount, if any; Preauthorization - A request to an Insurer to adjudicate the supplied proposed future charges for health care goods and services under the identified policy and to approve the services and provide the expected benefit amounts and potentially to reserve funds to pay the benefits when Claims for the indicated services are later submitted; or, Pre-determination - A request to an Insurer to adjudicate the supplied 'what if' charges for health care goods and services under the identified policy and report back what the Benefit payable would be had the services actually been provided.

                Shortclaim | preauthorization | predetermination
                Control1..1
                BindingThe codes SHALL be taken from Use
                (required to http://hl7.org/fhir/ValueSet/claim-use|5.0.0)

                The purpose of the Claim: predetermination, preauthorization, claim.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summarytrue
                Requirements

                This element is required to understand the nature of the request for adjudication.

                Pattern Valuepreauthorization
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                34. Claim.patient
                Definition

                The party to whom the professional services and/or products have been supplied or are being considered and for whom actual or forecast reimbursement is sought.

                ShortThe recipient of the products and services
                Control1..1
                TypeReference(HL7® AT Core Patient Profile)
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Requirements

                The patient must be supplied to the insurer so that confirmation of coverage and service history may be considered as part of the authorization and/or adjudiction.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                36. Claim.billablePeriod
                Definition

                The period for which charges are being submitted.

                ShortRelevant time frame for the claim
                Comments

                Typically this would be today or in the past for a claim, and today or in the future for preauthorizations and predeterminations. Typically line item dates of service should fall within the billing period if one is specified.

                Control0..1
                TypePeriod
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Requirements

                A number jurisdictions required the submission of the billing period when submitting claims for example for hospital stays or long-term care.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                38. Claim.created
                Definition

                The date this resource was created.

                ShortResource creation date
                Comments

                This field is independent of the date of creation of the resource as it may reflect the creation date of a source document prior to digitization. Typically for claims all services must be completed as of this date.

                Control1..1
                TypedateTime
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summarytrue
                Requirements

                Need to record a timestamp for use by both the recipient and the issuer.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                40. Claim.enterer
                Definition

                Individual who created the claim, predetermination or preauthorization.

                ShortAuthor of the claim
                Control0..1
                TypeReference(Practitioner, PractitionerRole, Patient, RelatedPerson)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Some jurisdictions require the contact information for personnel completing claims.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                42. Claim.insurer
                Definition

                The Insurer who is target of the request.

                ShortTarget
                Control1..1
                TypeReference(HL7® AT Core Organization Profile)
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                44. Claim.provider
                Definition

                The provider which is responsible for the claim, predetermination or preauthorization.

                ShortParty responsible for the claim
                Comments

                Typically this field would be 1..1 where this party is accountable for the data content within the claim but is not necessarily the facility, provider group or practitioner who provided the products and services listed within this claim resource. This field is the Billing Provider, for example, a facility, provider group, lab or practitioner.

                Control1..1
                TypeReference(HL7® AT Core Organization Profile)
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                46. Claim.priority
                Definition

                The provider-required urgency of processing the request. Typical values include: stat, normal, deferred.

                ShortDesired processing urgency
                Comments

                If a claim processor is unable to complete the processing as per the priority then they should generate an error and not process the request.

                Control0..1
                BindingFor example codes, see ProcessPriorityCodes
                (example to http://hl7.org/fhir/ValueSet/process-priority)

                The timeliness with which processing is required: stat, normal, deferred.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Requirements

                The provider may need to indicate their processing requirements so that the processor can indicate if they are unable to comply.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                48. Claim.fundsReserve
                Definition

                A code to indicate whether and for whom funds are to be reserved for future claims.

                ShortFor whom to reserve funds
                Comments

                This field is only used for preauthorizations.

                Control0..1
                BindingFor example codes, see FundsReservationCodes
                (example to http://hl7.org/fhir/ValueSet/fundsreserve)

                For whom funds are to be reserved: (Patient, Provider, None).

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                In the case of a Pre-Determination/Pre-Authorization the provider may request that funds in the amount of the expected Benefit be reserved ('Patient' or 'Provider') to pay for the Benefits determined on the subsequent claim(s). 'None' explicitly indicates no funds reserving is requested.

                Alternate NamesFund pre-allocation
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                50. Claim.related
                Definition

                Other claims which are related to this claim such as prior submissions or claims for related services or for the same event.

                ShortPrior or corollary claims
                Comments

                For example, for the original treatment and follow-up exams.

                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                For workplace or other accidents it is common to relate separate claims arising from the same event.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                52. Claim.related.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                54. Claim.related.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                56. Claim.related.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                58. Claim.related.claim
                Definition

                Reference to a related claim.

                ShortReference to the related claim
                Control0..1
                TypeReference(MOPED VAERequest)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                For workplace or other accidents it is common to relate separate claims arising from the same event.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                60. Claim.related.relationship
                Definition

                A code to convey how the claims are related.

                ShortHow the reference claim is related
                Comments

                For example, prior claim or umbrella.

                Control0..1
                BindingFor example codes, see ExampleRelatedClaimRelationshipCodes
                (example to http://hl7.org/fhir/ValueSet/related-claim-relationship)

                Relationship of this claim to a related Claim.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Some insurers need a declaration of the type of relationship.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                62. Claim.related.reference
                Definition

                An alternate organizational reference to the case or file to which this particular claim pertains.

                ShortFile or case reference
                Comments

                For example, Property/Casualty insurer claim # or Workers Compensation case # .

                Control0..1
                TypeIdentifier
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                In cases where an event-triggered claim is being submitted to an insurer which requires a reference number to be specified on all exchanges.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                64. Claim.prescription
                Definition

                Prescription is the document/authorization given to the claim author for them to provide products and services for which consideration (reimbursement) is sought. Could be a RX for medications, an 'order' for oxygen or wheelchair or physiotherapy treatments.

                ShortPrescription authorizing services and products
                Control0..1
                TypeReference(DeviceRequest, MedicationRequest, VisionPrescription)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Required to authorize the dispensing of controlled substances and devices.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                66. Claim.originalPrescription
                Definition

                Original prescription which has been superseded by this prescription to support the dispensing of pharmacy services, medications or products.

                ShortOriginal prescription if superseded by fulfiller
                Comments

                For example, a physician may prescribe a medication which the pharmacy determines is contraindicated, or for which the patient has an intolerance, and therefore issues a new prescription for an alternate medication which has the same therapeutic intent. The prescription from the pharmacy becomes the 'prescription' and that from the physician becomes the 'original prescription'.

                Control0..1
                TypeReference(DeviceRequest, MedicationRequest, VisionPrescription)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Often required when a fulfiller varies what is fulfilled from that authorized on the original prescription.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                68. Claim.payee
                Definition

                The party to be reimbursed for cost of the products and services according to the terms of the policy.

                ShortRecipient of benefits payable
                Comments

                Often providers agree to receive the benefits payable to reduce the near-term costs to the patient. The insurer may decline to pay the provider and choose to pay the subscriber instead.

                Control0..1
                TypeBackboneElement
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                The provider needs to specify who they wish to be reimbursed and the claims processor needs express who they will reimburse.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                70. Claim.payee.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                72. Claim.payee.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                74. Claim.payee.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                76. Claim.payee.type
                Definition

                Type of Party to be reimbursed: subscriber, provider, other.

                ShortCategory of recipient
                Control1..1
                BindingFor example codes, see ClaimPayeeTypeCodes
                (example to http://hl7.org/fhir/ValueSet/payeetype)

                A code for the party to be reimbursed.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Need to know who should receive payment with the most common situations being the Provider (assignment of benefits) or the Subscriber.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                78. Claim.payee.party
                Definition

                Reference to the individual or organization to whom any payment will be made.

                ShortRecipient reference
                Comments

                Not required if the payee is 'subscriber' or 'provider'.

                Control0..1
                TypeReference(Practitioner, PractitionerRole, Organization, Patient, RelatedPerson)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Need to provide demographics if the payee is not 'subscriber' nor 'provider'.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                80. Claim.referral
                Definition

                The referral information received by the claim author, it is not to be used when the author generates a referral for a patient. A copy of that referral may be provided as supporting information. Some insurers require proof of referral to pay for services or to pay specialist rates for services.

                ShortTreatment referral
                Comments

                The referral resource which lists the date, practitioner, reason and other supporting information.

                Control0..1
                TypeReference(ServiceRequest)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Some insurers require proof of referral to pay for services or to pay specialist rates for services.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                82. Claim.encounter
                Definition

                Healthcare encounters related to this claim.

                ShortEncounters associated with the listed treatments
                Comments

                This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

                Control1..*
                TypeReference(Encounter)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Used in some jurisdictions to link clinical events to claim items.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Claim.encounter. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • profile @ resolve()
                • 84. Claim.encounter:MopedEncounter
                  Slice NameMopedEncounter
                  Definition

                  Healthcare encounters related to this claim.

                  ShortGenerelle Informationen zu Aufnahme und Entlassung des Patienten
                  Comments

                  This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

                  Control1..1
                  TypeReference(MOPED Encounter)
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Used in some jurisdictions to link clinical events to claim items.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  86. Claim.encounter:TransferEncounter
                  Slice NameTransferEncounter
                  Definition

                  Healthcare encounters related to this claim.

                  ShortInformationen zu Verlegungen innerhalb oder zwischen Krankenanstalten
                  Comments

                  This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

                  Control0..*
                  TypeReference(MOPED TransferEncounter)
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Used in some jurisdictions to link clinical events to claim items.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  88. Claim.facility
                  Definition

                  Facility where the services were provided.

                  ShortServicing facility
                  Control0..1
                  TypeReference(Location, Organization)
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Insurance adjudication can be dependant on where services were delivered.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  90. Claim.diagnosisRelatedGroup
                  Definition

                  A package billing code or bundle code used to group products and services to a particular health condition (such as heart attack) which is based on a predetermined grouping code system.

                  ShortPackage billing code
                  Comments

                  For example DRG (Diagnosis Related Group) or a bundled billing code. A patient may have a diagnosis of a Myocardial Infarction and a DRG for HeartAttack would be assigned. The Claim item (and possible subsequent claims) would refer to the DRG for those line items that were for services related to the heart attack event.

                  Control0..1
                  BindingFor example codes, see ExampleDiagnosisRelatedGroupCodes
                  (example to http://hl7.org/fhir/ValueSet/ex-diagnosisrelatedgroup)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Required to relate the current diagnosis to a package billing code that is then referenced on the individual claim items which are specific to the health condition covered by the package code.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  92. Claim.event
                  Definition

                  Information code for an event with a corresponding date or period.

                  ShortEvent information
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  94. Claim.event.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  96. Claim.event.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  98. Claim.event.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  100. Claim.event.type
                  Definition

                  A coded event such as when a service is expected or a card printed.

                  ShortSpecific event
                  Control1..1
                  BindingFor example codes, see DatesTypeCodes
                  (example to http://hl7.org/fhir/ValueSet/datestype)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  102. Claim.event.when[x]
                  Definition

                  A date or period in the past or future indicating when the event occurred or is expectd to occur.

                  ShortOccurance date or period
                  Control1..1
                  TypeChoice of: dateTime, Period
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  104. Claim.careTeam
                  Definition

                  The members of the team who provided the products and services.

                  ShortMembers of the care team
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Common to identify the responsible and supporting practitioners.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  106. Claim.careTeam.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  108. Claim.careTeam.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  110. Claim.careTeam.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  112. Claim.careTeam.sequence
                  Definition

                  A number to uniquely identify care team entries.

                  ShortOrder of care team
                  Control1..1
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Necessary to maintain the order of the care team and provide a mechanism to link individuals to claim details.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  114. Claim.careTeam.provider
                  Definition

                  Member of the team who provided the product or service.

                  ShortPractitioner or organization
                  Control1..1
                  TypeReference(Practitioner, PractitionerRole, Organization)
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Often a regulatory requirement to specify the responsible provider.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  116. Claim.careTeam.responsible
                  Definition

                  The party who is billing and/or responsible for the claimed products or services.

                  ShortIndicator of the lead practitioner
                  Comments

                  Responsible might not be required when there is only a single provider listed.

                  Control0..1
                  Typeboolean
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  When multiple parties are present it is required to distinguish the lead or responsible individual.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  118. Claim.careTeam.role
                  Definition

                  The lead, assisting or supervising practitioner and their discipline if a multidisciplinary team.

                  ShortFunction within the team
                  Comments

                  Role might not be required when there is only a single provider listed.

                  Control0..1
                  BindingFor example codes, see ClaimCareTeamRoleCodes
                  (example to http://hl7.org/fhir/ValueSet/claim-careteamrole)

                  The role codes for the care team members.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  When multiple parties are present it is required to distinguish the roles performed by each member.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  120. Claim.careTeam.specialty
                  Definition

                  The specialization of the practitioner or provider which is applicable for this service.

                  ShortPractitioner or provider specialization
                  Control0..1
                  BindingFor example codes, see ExampleProviderQualificationCodes
                  (example to http://hl7.org/fhir/ValueSet/provider-qualification)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Need to specify which specialization a practitioner or provider acting under when delivering the product or service.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  122. Claim.supportingInfo
                  Definition

                  Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

                  ShortSupporting information
                  Comments

                  Often there are multiple jurisdiction specific valuesets which are required.

                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

                  Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Claim.supportingInfo. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ code.coding
                  • 124. Claim.supportingInfo.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    126. Claim.supportingInfo.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    128. Claim.supportingInfo.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    130. Claim.supportingInfo.sequence
                    Definition

                    A number to uniquely identify supporting information entries.

                    ShortInformation instance identifier
                    Control1..1
                    TypepositiveInt
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    132. Claim.supportingInfo.category
                    Definition

                    The general class of the information supplied: information; exception; accident, employment; onset, etc.

                    ShortClassification of the supplied information
                    Comments

                    This may contain a category for the local bill type codes.

                    Control1..1
                    BindingFor example codes, see ClaimInformationCategoryCodes
                    (example to http://hl7.org/fhir/ValueSet/claim-informationcategory)

                    The valuset used for additional information category codes.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    134. Claim.supportingInfo.code
                    Definition

                    System and code pertaining to the specific information regarding special conditions relating to the setting, treatment or patient for which care is sought.

                    ShortType of information
                    Control0..1
                    BindingFor example codes, see ExceptionCodes
                    (example to http://hl7.org/fhir/ValueSet/claim-exception)

                    The valuset used for additional information codes.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    Required to identify the kind of additional information.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    136. Claim.supportingInfo.timing[x]
                    Definition

                    The date when or period to which this information refers.

                    ShortWhen it occurred
                    Control0..1
                    TypeChoice of: date, Period
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    138. Claim.supportingInfo.value[x]
                    Definition

                    Additional data or information such as resources, documents, images etc. including references to the data or the actual inclusion of the data.

                    ShortData to be provided
                    Comments

                    Could be used to provide references to other resources, document. For example could contain a PDF in an Attachment of the Police Report for an Accident.

                    Control0..1
                    TypeChoice of: boolean, string, Quantity, Attachment, Reference(Resource), Identifier
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    To convey the data content to be provided when the information is more than a simple code or period.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    140. Claim.supportingInfo.reason
                    Definition

                    Provides the reason in the situation where a reason code is required in addition to the content.

                    ShortExplanation for the information
                    Comments

                    For example: the reason for the additional stay, or why a tooth is missing.

                    Control0..1
                    BindingFor example codes, see MissingToothReasonCodes
                    (example to http://hl7.org/fhir/ValueSet/missing-tooth-reason)

                    Reason codes for the missing teeth.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    Needed when the supporting information has both a date and amount/value and requires explanation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    142. Claim.supportingInfo:VerdachtFremdverschulden
                    Slice NameVerdachtFremdverschulden
                    Definition

                    Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

                    ShortVerdacht auf Fremdversschluden
                    Comments

                    Often there are multiple jurisdiction specific valuesets which are required.

                    Control0..1
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

                    Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    144. Claim.supportingInfo:VerdachtFremdverschulden.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    146. Claim.supportingInfo:VerdachtFremdverschulden.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    148. Claim.supportingInfo:VerdachtFremdverschulden.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    150. Claim.supportingInfo:VerdachtFremdverschulden.sequence
                    Definition

                    A number to uniquely identify supporting information entries.

                    ShortInformation instance identifier
                    Control1..1
                    TypepositiveInt
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    152. Claim.supportingInfo:VerdachtFremdverschulden.category
                    Definition

                    The general class of the information supplied: information; exception; accident, employment; onset, etc.

                    ShortClassification of the supplied information
                    Comments

                    This may contain a category for the local bill type codes.

                    Control1..1
                    BindingFor example codes, see ClaimInformationCategoryCodes
                    (example to http://hl7.org/fhir/ValueSet/claim-informationcategory)

                    The valuset used for additional information category codes.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://terminology.hl7.org/CodeSystem/claim-informationcategory",
                        "code" : "info"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    154. Claim.supportingInfo:VerdachtFremdverschulden.code
                    Definition

                    System and code pertaining to the specific information regarding special conditions relating to the setting, treatment or patient for which care is sought.

                    ShortType of information
                    Control0..1
                    BindingFor example codes, see ExceptionCodes
                    (example to http://hl7.org/fhir/ValueSet/claim-exception)

                    The valuset used for additional information codes.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    Required to identify the kind of additional information.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    156. Claim.supportingInfo:VerdachtFremdverschulden.code.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typeid
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    158. Claim.supportingInfo:VerdachtFremdverschulden.code.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Claim.supportingInfo.code.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 160. Claim.supportingInfo:VerdachtFremdverschulden.code.coding
                      Definition

                      A reference to a code defined by a terminology system.

                      ShortCode defined by a terminology system
                      Comments

                      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                      Control1..*
                      TypeCoding
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Allows for alternative encodings within a code system, and translations to other code systems.

                      Pattern Value{
                        "system" : "https://elga.moped.at/CodeSystem/VAESupportingInformationTypesCS",
                        "code" : "FREVER"
                      }
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      162. Claim.supportingInfo:VerdachtFremdverschulden.code.text
                      Definition

                      A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                      ShortPlain text representation of the concept
                      Comments

                      Very often the text is the same as a displayName of one of the codings.

                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      164. Claim.supportingInfo:VerdachtFremdverschulden.timing[x]
                      Definition

                      The date when or period to which this information refers.

                      ShortWhen it occurred
                      Control0..1
                      TypeChoice of: date, Period
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      166. Claim.supportingInfo:VerdachtFremdverschulden.value[x]
                      Definition

                      Additional data or information such as resources, documents, images etc. including references to the data or the actual inclusion of the data.

                      ShortData to be provided
                      Comments

                      Could be used to provide references to other resources, document. For example could contain a PDF in an Attachment of the Police Report for an Accident.

                      Control0..1
                      Typeboolean
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      To convey the data content to be provided when the information is more than a simple code or period.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      168. Claim.supportingInfo:VerdachtFremdverschulden.reason
                      Definition

                      Provides the reason in the situation where a reason code is required in addition to the content.

                      ShortExplanation for the information
                      Comments

                      For example: the reason for the additional stay, or why a tooth is missing.

                      Control0..1
                      BindingFor example codes, see MissingToothReasonCodes
                      (example to http://hl7.org/fhir/ValueSet/missing-tooth-reason)

                      Reason codes for the missing teeth.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed when the supporting information has both a date and amount/value and requires explanation.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      170. Claim.diagnosis
                      Definition

                      Information about diagnoses relevant to the claim items.

                      ShortPertinent diagnosis information
                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required for the adjudication by provided context for the services and product listed.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      172. Claim.diagnosis.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      174. Claim.diagnosis.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      176. Claim.diagnosis.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      178. Claim.diagnosis.sequence
                      Definition

                      A number to uniquely identify diagnosis entries.

                      ShortDiagnosis instance identifier
                      Comments

                      Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

                      Control1..1
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      180. Claim.diagnosis.diagnosis[x]
                      Definition

                      The nature of illness or problem in a coded form or as a reference to an external defined Condition.

                      ShortNature of illness or problem
                      Control1..1
                      BindingFor example codes, see ICD10Codes
                      (example to http://hl7.org/fhir/ValueSet/icd-10)

                      Example ICD10 Diagnostic codes.

                      TypeChoice of: CodeableConcept, Reference(Condition)
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides health context for the evaluation of the products and/or services.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      182. Claim.diagnosis.type
                      Definition

                      When the condition was observed or the relative ranking.

                      ShortTiming or nature of the diagnosis
                      Comments

                      For example: admitting, primary, secondary, discharge.

                      Control0..*
                      BindingFor example codes, see ExampleDiagnosisTypeCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-diagnosistype)

                      The type of the diagnosis: admitting, principal, discharge.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Often required to capture a particular diagnosis, for example: primary or discharge.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      184. Claim.diagnosis.onAdmission
                      Definition

                      Gibt an ob die Diagnose bereits bei Aufnahme in den stationären Aufenthalt vorhanden war

                      ShortPresent on admission
                      Control0..1
                      BindingFor example codes, see ExampleDiagnosisOnAdmissionCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-diagnosis-on-admission)

                      Present on admission.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Many systems need to understand for adjudication if the diagnosis was present a time of admission.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      186. Claim.procedure
                      Definition

                      Procedures performed on the patient relevant to the billing items with the claim.

                      ShortClinical procedures performed
                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The specific clinical invention are sometimes required to be provided to justify billing a greater than customary amount for a service.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      188. Claim.procedure.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      190. Claim.procedure.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      192. Claim.procedure.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      194. Claim.procedure.sequence
                      Definition

                      A number to uniquely identify procedure entries.

                      ShortProcedure instance identifier
                      Control1..1
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to provide a mechanism to link to claim details.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      196. Claim.procedure.type
                      Definition

                      When the condition was observed or the relative ranking.

                      ShortCategory of Procedure
                      Comments

                      For example: primary, secondary.

                      Control0..*
                      BindingFor example codes, see ExampleProcedureTypeCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-procedure-type)

                      Example procedure type codes.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Often required to capture a particular diagnosis, for example: primary or discharge.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      198. Claim.procedure.date
                      Definition

                      Date and optionally time the procedure was performed.

                      ShortWhen the procedure was performed
                      Control0..1
                      TypedateTime
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required for auditing purposes.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      200. Claim.procedure.procedure[x]
                      Definition

                      The code or reference to a Procedure resource which identifies the clinical intervention performed.

                      ShortSpecific clinical procedure
                      Control1..1
                      BindingFor example codes, see ICD10ProcedureCodes
                      (example to http://hl7.org/fhir/ValueSet/icd-10-procedures)

                      Example ICD10 Procedure codes.

                      TypeChoice of: CodeableConcept, Reference(Procedure)
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      This identifies the actual clinical procedure.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      202. Claim.procedure.udi
                      Definition

                      Unique Device Identifiers associated with this line item.

                      ShortUnique device identifier
                      Control0..*
                      TypeReference(Device)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The UDI code allows the insurer to obtain device level information on the product supplied.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      204. Claim.insurance
                      Definition

                      Financial instruments for reimbursement for the health care products and services specified on the claim.

                      ShortPatient insurance information
                      Comments

                      All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'Coverage.subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summarytrue
                      Requirements

                      At least one insurer is required for a claim to be a claim.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      206. Claim.insurance.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      208. Claim.insurance.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      210. Claim.insurance.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      212. Claim.insurance.sequence
                      Definition

                      A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

                      ShortInsurance instance identifier
                      Control1..1
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summarytrue
                      Requirements

                      To maintain order of the coverages.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      214. Claim.insurance.focal
                      Definition

                      A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

                      ShortCoverage to be used for adjudication
                      Comments

                      A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

                      Control1..1
                      Typeboolean
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summarytrue
                      Requirements

                      To identify which coverage in the list is being used to adjudicate this claim.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      216. Claim.insurance.identifier
                      Definition

                      The business identifier to be used when the claim is sent for adjudication against this insurance policy.

                      ShortPre-assigned Claim number
                      Comments

                      Only required in jurisdictions where insurers, rather than the provider, are required to send claims to insurers that appear after them in the list. This element is not required when 'subrogation=true'.

                      NoteThis is a business identifier, not a resource identifier (see discussion)
                      Control0..1
                      TypeIdentifier
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      This will be the claim number should it be necessary to create this claim in the future. This is provided so that payors may forward claims to other payors in the Coordination of Benefit for adjudication rather than the provider being required to initiate each adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      218. Claim.insurance.coverage
                      Definition

                      Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

                      ShortInsurance information
                      Control1..1
                      TypeReference(MOPED Coverage)
                      Is Modifierfalse
                      Must Supportfalse
                      Summarytrue
                      Requirements

                      Required to allow the adjudicator to locate the correct policy and history within their information system.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      220. Claim.insurance.businessArrangement
                      Definition

                      A business agreement number established between the provider and the insurer for special business processing purposes.

                      ShortAdditional provider contract number
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Providers may have multiple business arrangements with a given insurer and must supply the specific contract number for adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      222. Claim.insurance.preAuthRef
                      Definition

                      Reference numbers previously provided by the insurer to the provider to be quoted on subsequent claims containing services or products related to the prior authorization.

                      ShortPrior authorization reference number
                      Comments

                      This value is an alphanumeric string that may be provided over the phone, via text, via paper, or within a ClaimResponse resource and is not a FHIR Identifier.

                      Control0..*
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Providers must quote previously issued authorization reference numbers in order to obtain adjudication as previously advised on the Preauthorization.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      224. Claim.insurance.claimResponse
                      Definition

                      The result of the adjudication of the line items for the Coverage specified in this insurance.

                      ShortAdjudication results
                      Comments

                      Must not be specified when 'focal=true' for this insurance.

                      Control0..1
                      TypeReference(ClaimResponse)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      An insurer need the adjudication results from prior insurers to determine the outstanding balance remaining by item for the items in the curent claim.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      226. Claim.accident
                      Definition

                      Details of an accident which resulted in injuries which required the products and services listed in the claim.

                      ShortDetails of the event
                      Control0..1
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      When healthcare products and services are accident related, benefits may be payable under accident provisions of policies, such as automotive, etc before they are payable under normal health insurance.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      228. Claim.accident.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      230. Claim.accident.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      232. Claim.accident.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      234. Claim.accident.date
                      Definition

                      Date of an accident event related to the products and services contained in the claim.

                      ShortWhen the incident occurred
                      Comments

                      The date of the accident has to precede the dates of the products and services but within a reasonable timeframe.

                      Control1..1
                      Typedate
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required for audit purposes and adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      236. Claim.accident.type
                      Definition

                      The type or context of the accident event for the purposes of selection of potential insurance coverages and determination of coordination between insurers.

                      ShortThe nature of the accident
                      Control0..1
                      BindingThe codes SHALL be taken from Verdacht auf Arbeits- oder Schuelerunfall ValueSet
                      (required to https://elga.moped.at/ValueSet/VerdachtArbeitsSchuelerunfallVS)
                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Coverage may be dependant on the type of accident.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      238. Claim.accident.location[x]
                      Definition

                      The physical location of the accident event.

                      ShortWhere the event occurred
                      Control0..1
                      TypeChoice of: Address, Reference(Location)
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required for audit purposes and determination of applicable insurance liability.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      240. Claim.patientPaid
                      Definition

                      The amount paid by the patient, in total at the claim claim level or specifically for the item and detail level, to the provider for goods and services.

                      ShortPaid by the patient
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to demonstrate that copayments, co-insurance and similar patient payments have been made or accounted for.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      242. Claim.item
                      Definition

                      A claim line. Either a simple product or service or a 'group' of details which can each be a simple items or groups of sub-details.

                      ShortProduct or service provided
                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The items to be processed for adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      244. Claim.item.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      246. Claim.item.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      248. Claim.item.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      250. Claim.item.sequence
                      Definition

                      A number to uniquely identify item entries.

                      ShortItem instance identifier
                      Control1..1
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      252. Claim.item.traceNumber
                      Definition

                      Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                      ShortNumber for tracking
                      Control0..*
                      TypeIdentifier
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Allows partners to uniquely identify components for tracking.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      254. Claim.item.careTeamSequence
                      Definition

                      CareTeam members related to this service or product.

                      ShortApplicable careTeam members
                      Control0..*
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Need to identify the individuals and their roles in the provision of the product or service.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      256. Claim.item.diagnosisSequence
                      Definition

                      Diagnosis applicable for this service or product.

                      ShortApplicable diagnoses
                      Control0..*
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Need to related the product or service to the associated diagnoses.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      258. Claim.item.procedureSequence
                      Definition

                      Procedures applicable for this service or product.

                      ShortApplicable procedures
                      Control0..*
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Need to provide any listed specific procedures to support the product or service being claimed.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      260. Claim.item.informationSequence
                      Definition

                      Exceptions, special conditions and supporting information applicable for this service or product.

                      ShortApplicable exception and supporting information
                      Control0..*
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Need to reference the supporting information items that relate directly to this product or service.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      262. Claim.item.revenue
                      Definition

                      The type of revenue or cost center providing the product and/or service.

                      ShortRevenue or cost center code
                      Control0..1
                      BindingFor example codes, see ExampleRevenueCenterCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

                      Codes for the revenue or cost centers supplying the service and/or products.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed in the processing of institutional claims.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      264. Claim.item.category
                      Definition

                      Code to identify the general type of benefits under which products and services are provided.

                      ShortBenefit classification
                      Comments

                      Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

                      Control0..1
                      BindingFor example codes, see BenefitCategoryCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory)

                      Benefit categories such as: oral-basic, major, glasses.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      266. Claim.item.productOrService
                      Definition

                      When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                      ShortBilling, service, product, or drug code
                      Comments

                      If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)

                      Allowable service and product codes.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to state what was provided or done.

                      Alternate NamesDrug Code, Bill Code, Service Code
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      268. Claim.item.productOrServiceEnd
                      Definition

                      This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                      ShortEnd of a range of codes
                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)
                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      270. Claim.item.request
                      Definition

                      Request or Referral for Goods or Service to be rendered.

                      ShortRequest or Referral for Service
                      Control0..*
                      TypeReference(DeviceRequest, MedicationRequest, NutritionOrder, ServiceRequest, SupplyRequest, VisionPrescription)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      May identify the service to be provided or provider authorization for the service.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      272. Claim.item.modifier
                      Definition

                      Item typification or modifiers codes to convey additional context for the product or service.

                      ShortProduct or service billing modifiers
                      Comments

                      For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

                      Control0..*
                      BindingFor example codes, see ModifierTypeCodes
                      (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

                      Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      To support inclusion of the item for adjudication or to charge an elevated fee.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      274. Claim.item.programCode
                      Definition

                      Identifies the program under which this may be recovered.

                      ShortProgram the product or service is provided under
                      Comments

                      For example: Neonatal program, child dental program or drug users recovery program.

                      Control0..*
                      BindingFor example codes, see ExampleProgramReasonCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-program-code)

                      Program specific reason codes.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      276. Claim.item.serviced[x]
                      Definition

                      The date or dates when the service or product was supplied, performed or completed.

                      ShortDate or dates of service or product delivery
                      Control0..1
                      TypeChoice of: date, Period
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed to determine whether the service or product was provided during the term of the insurance coverage.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      278. Claim.item.location[x]
                      Definition

                      Where the product or service was provided.

                      ShortPlace of service or where product was supplied
                      Control0..1
                      BindingFor example codes, see ExampleServicePlaceCodes
                      (example to http://hl7.org/fhir/ValueSet/service-place)

                      Place of service: pharmacy, school, prison, etc.

                      TypeChoice of: CodeableConcept, Address, Reference(Location)
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The location can alter whether the item was acceptable for insurance purposes or impact the determination of the benefit amount.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      280. Claim.item.patientPaid
                      Definition

                      The amount paid by the patient, in total at the claim claim level or specifically for the item and detail level, to the provider for goods and services.

                      ShortPaid by the patient
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to demonstrate that copayments, co-insurance and similar patient payments have been made or accounted for.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      282. Claim.item.quantity
                      Definition

                      The number of repetitions of a service or product.

                      ShortCount of products or services
                      Control0..1
                      TypeQuantity(SimpleQuantity)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when the product or service code does not convey the quantity provided.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      284. Claim.item.unitPrice
                      Definition

                      If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                      ShortFee, charge or cost per item
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The amount charged to the patient by the provider for a single unit.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      286. Claim.item.factor
                      Definition

                      A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                      ShortPrice scaling factor
                      Comments

                      To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                      Control0..1
                      Typedecimal
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      288. Claim.item.tax
                      Definition

                      The total of taxes applicable for this product or service.

                      ShortTotal tax
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when taxes are not embedded in the unit price or provided as a separate service.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      290. Claim.item.net
                      Definition

                      The total amount claimed for the group (if a grouper) or the line item. Net = unit price * quantity * factor.

                      ShortTotal item cost
                      Comments

                      For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides the total amount claimed for the group (if a grouper) or the line item.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      292. Claim.item.udi
                      Definition

                      Unique Device Identifiers associated with this line item.

                      ShortUnique device identifier
                      Control0..*
                      TypeReference(Device)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The UDI code allows the insurer to obtain device level information on the product supplied.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      294. Claim.item.bodySite
                      Definition

                      Physical location where the service is performed or applies.

                      ShortAnatomical location
                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      296. Claim.item.bodySite.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      298. Claim.item.bodySite.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      300. Claim.item.bodySite.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      302. Claim.item.bodySite.site
                      Definition

                      Physical service site on the patient (limb, tooth, etc.).

                      ShortLocation
                      Comments

                      For example: Providing a tooth code, allows an insurer to identify a provider performing a filling on a tooth that was previously removed.

                      Control1..*
                      BindingFor example codes, see OralSiteCodes
                      (example to http://hl7.org/fhir/ValueSet/tooth)
                      TypeCodeableReference(BodyStructure)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Allows insurer to validate specific procedures.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      304. Claim.item.bodySite.subSite
                      Definition

                      A region or surface of the bodySite, e.g. limb region or tooth surface(s).

                      ShortSub-location
                      Control0..*
                      BindingFor example codes, see SurfaceCodes
                      (example to http://hl7.org/fhir/ValueSet/surface)
                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Allows insurer to validate specific procedures.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      306. Claim.item.encounter
                      Definition

                      Healthcare encounters related to this claim.

                      ShortEncounters associated with the listed treatments
                      Comments

                      This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

                      Control0..*
                      TypeReference(Encounter)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Used in some jurisdictions to link clinical events to claim items.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      308. Claim.item.detail
                      Definition

                      A claim detail line. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

                      ShortProduct or service provided
                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The items to be processed for adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      310. Claim.item.detail.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      312. Claim.item.detail.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      314. Claim.item.detail.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      316. Claim.item.detail.sequence
                      Definition

                      A number to uniquely identify item entries.

                      ShortItem instance identifier
                      Control1..1
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      318. Claim.item.detail.traceNumber
                      Definition

                      Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                      ShortNumber for tracking
                      Control0..*
                      TypeIdentifier
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Allows partners to uniquely identify components for tracking.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      320. Claim.item.detail.revenue
                      Definition

                      The type of revenue or cost center providing the product and/or service.

                      ShortRevenue or cost center code
                      Control0..1
                      BindingFor example codes, see ExampleRevenueCenterCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

                      Codes for the revenue or cost centers supplying the service and/or products.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed in the processing of institutional claims.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      322. Claim.item.detail.category
                      Definition

                      Code to identify the general type of benefits under which products and services are provided.

                      ShortBenefit classification
                      Comments

                      Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

                      Control0..1
                      BindingFor example codes, see BenefitCategoryCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory)

                      Benefit categories such as: oral-basic, major, glasses.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      324. Claim.item.detail.productOrService
                      Definition

                      When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                      ShortBilling, service, product, or drug code
                      Comments

                      If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)

                      Allowable service and product codes.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to state what was provided or done.

                      Alternate NamesDrug Code, Bill Code, Service Code
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      326. Claim.item.detail.productOrServiceEnd
                      Definition

                      This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                      ShortEnd of a range of codes
                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)
                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      328. Claim.item.detail.modifier
                      Definition

                      Item typification or modifiers codes to convey additional context for the product or service.

                      ShortService/Product billing modifiers
                      Comments

                      For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or out of office hours.

                      Control0..*
                      BindingFor example codes, see ModifierTypeCodes
                      (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

                      Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      To support inclusion of the item for adjudication or to charge an elevated fee.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      330. Claim.item.detail.programCode
                      Definition

                      Identifies the program under which this may be recovered.

                      ShortProgram the product or service is provided under
                      Comments

                      For example: Neonatal program, child dental program or drug users recovery program.

                      Control0..*
                      BindingFor example codes, see ExampleProgramReasonCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-program-code)

                      Program specific reason codes.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      332. Claim.item.detail.patientPaid
                      Definition

                      The amount paid by the patient, in total at the claim claim level or specifically for the item and detail level, to the provider for goods and services.

                      ShortPaid by the patient
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to demonstrate that copayments, co-insurance and similar patient payments have been made or accounted for.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      334. Claim.item.detail.quantity
                      Definition

                      The number of repetitions of a service or product.

                      ShortCount of products or services
                      Control0..1
                      TypeQuantity(SimpleQuantity)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when the product or service code does not convey the quantity provided.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      336. Claim.item.detail.unitPrice
                      Definition

                      If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                      ShortFee, charge or cost per item
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The amount charged to the patient by the provider for a single unit.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      338. Claim.item.detail.factor
                      Definition

                      A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                      ShortPrice scaling factor
                      Comments

                      To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                      Control0..1
                      Typedecimal
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      340. Claim.item.detail.tax
                      Definition

                      The total of taxes applicable for this product or service.

                      ShortTotal tax
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when taxes are not embedded in the unit price or provided as a separate service.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      342. Claim.item.detail.net
                      Definition

                      The total amount claimed for the group (if a grouper) or the line item.detail. Net = unit price * quantity * factor.

                      ShortTotal item cost
                      Comments

                      For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides the total amount claimed for the group (if a grouper) or the line item.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      344. Claim.item.detail.udi
                      Definition

                      Unique Device Identifiers associated with this line item.

                      ShortUnique device identifier
                      Control0..*
                      TypeReference(Device)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The UDI code allows the insurer to obtain device level information on the product supplied.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      346. Claim.item.detail.subDetail
                      Definition

                      A claim detail line. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

                      ShortProduct or service provided
                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The items to be processed for adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      348. Claim.item.detail.subDetail.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      350. Claim.item.detail.subDetail.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      352. Claim.item.detail.subDetail.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      354. Claim.item.detail.subDetail.sequence
                      Definition

                      A number to uniquely identify item entries.

                      ShortItem instance identifier
                      Control1..1
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      356. Claim.item.detail.subDetail.traceNumber
                      Definition

                      Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                      ShortNumber for tracking
                      Control0..*
                      TypeIdentifier
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Allows partners to uniquely identify components for tracking.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      358. Claim.item.detail.subDetail.revenue
                      Definition

                      The type of revenue or cost center providing the product and/or service.

                      ShortRevenue or cost center code
                      Control0..1
                      BindingFor example codes, see ExampleRevenueCenterCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

                      Codes for the revenue or cost centers supplying the service and/or products.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed in the processing of institutional claims.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      360. Claim.item.detail.subDetail.category
                      Definition

                      Code to identify the general type of benefits under which products and services are provided.

                      ShortBenefit classification
                      Comments

                      Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

                      Control0..1
                      BindingFor example codes, see BenefitCategoryCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory)

                      Benefit categories such as: oral-basic, major, glasses.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      362. Claim.item.detail.subDetail.productOrService
                      Definition

                      When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                      ShortBilling, service, product, or drug code
                      Comments

                      If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)

                      Allowable service and product codes.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to state what was provided or done.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      364. Claim.item.detail.subDetail.productOrServiceEnd
                      Definition

                      This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                      ShortEnd of a range of codes
                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)
                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      366. Claim.item.detail.subDetail.modifier
                      Definition

                      Item typification or modifiers codes to convey additional context for the product or service.

                      ShortService/Product billing modifiers
                      Comments

                      For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or out of office hours.

                      Control0..*
                      BindingFor example codes, see ModifierTypeCodes
                      (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

                      Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      To support inclusion of the item for adjudication or to charge an elevated fee.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      368. Claim.item.detail.subDetail.programCode
                      Definition

                      Identifies the program under which this may be recovered.

                      ShortProgram the product or service is provided under
                      Comments

                      For example: Neonatal program, child dental program or drug users recovery program.

                      Control0..*
                      BindingFor example codes, see ExampleProgramReasonCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-program-code)

                      Program specific reason codes.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      370. Claim.item.detail.subDetail.patientPaid
                      Definition

                      The amount paid by the patient, in total at the claim claim level or specifically for the item and detail level, to the provider for goods and services.

                      ShortPaid by the patient
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to demonstrate that copayments, co-insurance and similar patient payments have been made or accounted for.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      372. Claim.item.detail.subDetail.quantity
                      Definition

                      The number of repetitions of a service or product.

                      ShortCount of products or services
                      Control0..1
                      TypeQuantity(SimpleQuantity)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when the product or service code does not convey the quantity provided.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      374. Claim.item.detail.subDetail.unitPrice
                      Definition

                      If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                      ShortFee, charge or cost per item
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The amount charged to the patient by the provider for a single unit.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      376. Claim.item.detail.subDetail.factor
                      Definition

                      A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                      ShortPrice scaling factor
                      Comments

                      To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                      Control0..1
                      Typedecimal
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      378. Claim.item.detail.subDetail.tax
                      Definition

                      The total of taxes applicable for this product or service.

                      ShortTotal tax
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when taxes are not embedded in the unit price or provided as a separate service.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      380. Claim.item.detail.subDetail.net
                      Definition

                      The total amount claimed for line item.detail.subDetail. Net = unit price * quantity * factor.

                      ShortTotal item cost
                      Comments

                      For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides the total amount claimed for the group (if a grouper) or the line item.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      382. Claim.item.detail.subDetail.udi
                      Definition

                      Unique Device Identifiers associated with this line item.

                      ShortUnique device identifier
                      Control0..*
                      TypeReference(Device)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The UDI code allows the insurer to obtain device level information on the product supplied.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      384. Claim.total
                      Definition

                      The total value of the all the items in the claim.

                      ShortTotal claim cost
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Used for control total purposes.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))