FHIR.EXAMPLE\LKF Punkte - Definitions

Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED) - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Extension: LKFPunkte - Detailed Descriptions

Draft as of 2024-10-29

Definitions for the lkfPunkte extension.

Differential Elements Table
Key Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	In dieser Extension werden alle möglichen Punkteangaben im LKF zusammengefasst.
Short	LKF Punkte
2. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente
Slice Name	PunkteBelagsdauerausreisserUntenLeistungskomponente
Definition	In dieses Datenfeld ist – soweit zutreffend – die ermittelte Leistungskomponente für jene Patient:innen einzutragen, deren Belagsdauer des akutstationären Krankenhausaufenthalts unter der im LKF-Modell in der jeweiligen LDF-Pauschale festgelegten Belagsdaueruntergrenze liegt.
Short	Punkte Belagsdauerausreisser unten - Leistungskomponente
Control	0..1
Binding	In dieses Datenfeld ist – soweit zutreffend – die ermittelte Leistungskomponente für jene Patient:innen einzutragen, deren Belagsdauer des akutstationären Krankenhausaufenthalts unter der im LKF-Modell in der jeweiligen LDF-Pauschale festgelegten Belagsdaueruntergrenze liegt.
4. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente.extension
Control	0..0
6. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente.url
Fixed Value	`PunkteBelagsdauerausreisserUntenLeistungskomponente`
8. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente.value[x]
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
10. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente
Slice Name	PunkteBelagsdauerausreisserUntenTageskomponente
Definition	In dieses Datenfeld ist – soweit zutreffend – die ermittelte Tageskomponente für jene Patient:innen einzutragen, deren Belagsdauer des akutstationären Krankenhausaufenthalts unter der im LKF-Modell in der jeweiligen LDF-Pauschale festgelegten Belagsdaueruntergrenze liegt.
Short	Punkte Belagsdauerausreisser unten - Tageskomponente
Control	0..1
Binding	In dieses Datenfeld ist – soweit zutreffend – die ermittelte Tageskomponente für jene Patient:innen einzutragen, deren Belagsdauer des akutstationären Krankenhausaufenthalts unter der im LKF-Modell in der jeweiligen LDF-Pauschale festgelegten Belagsdaueruntergrenze liegt.
12. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente.extension
Control	0..0
14. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente.url
Fixed Value	`PunkteBelagsdauerausreisserUntenTageskomponente`
16. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente.value[x]
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
18. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben
Slice Name	ZusatzpunkteBelagsdauerausreisserNachOben
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der tageweise ermittelten Zusatzpunkte für jene Patient:innen einzutragen, deren Belagsdauer des akut-stationären Krankenhausaufenthaltes über der im LKF-Modell in der jeweiligen LDF-Pauschale fest- gelegten Belagsdauerobergrenze liegt.
Short	Zusatzpunkte Belagsdauerausreißer nach oben
Control	0..1
Binding	In dieses Datenfeld ist – soweit zutreffend – die Summe der tageweise ermittelten Zusatzpunkte für jene Patient:innen einzutragen, deren Belagsdauer des akut-stationären Krankenhausaufenthaltes über der im LKF-Modell in der jeweiligen LDF-Pauschale fest- gelegten Belagsdauerobergrenze liegt.
20. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben.extension
Control	0..0
22. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben.url
Fixed Value	`ZusatzpunkteBelagsdauerausreisserNachOben`
24. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben.value[x]
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
26. Extension.extension:ZusatzpunkteIntensiv
Slice Name	ZusatzpunkteIntensiv
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der Zusatzpunkte für während des stationären Krankenhausaufenthalts angefallene Tage auf abrechnungsrelevanten Intensiveinheiten einzutragen.
Short	Zusatzpunkte Intensiv
Control	0..1
Binding	In dieses Datenfeld ist – soweit zutreffend – die Summe der Zusatzpunkte für während des stationären Krankenhausaufenthalts angefallene Tage auf abrechnungsrelevanten Intensiveinheiten einzutragen.
28. Extension.extension:ZusatzpunkteIntensiv.extension
Control	0..0
30. Extension.extension:ZusatzpunkteIntensiv.url
Fixed Value	`ZusatzpunkteIntensiv`
32. Extension.extension:ZusatzpunkteIntensiv.value[x]
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
34. Extension.extension:ZusatzpunkteMehrfachleistungen
Slice Name	ZusatzpunkteMehrfachleistungen
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der Zusatzpunkte für zusätzliche Leistungen außerhalb des Punktepauschales der zur Abrechnung gelangenden Gruppe einzutragen.
Short	Zusatzpunkte Mehrfachleistungen
Control	0..1
Binding	In dieses Datenfeld ist – soweit zutreffend – die Summe der Zusatzpunkte für zusätzliche Leistungen außerhalb des Punktepauschales der zur Abrechnung gelangenden Gruppe einzutragen.
36. Extension.extension:ZusatzpunkteMehrfachleistungen.extension
Control	0..0
38. Extension.extension:ZusatzpunkteMehrfachleistungen.url
Fixed Value	`ZusatzpunkteMehrfachleistungen`
40. Extension.extension:ZusatzpunkteMehrfachleistungen.value[x]
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
42. Extension.extension:PunkteSpeziellerBereicheTageweise
Slice Name	PunkteSpeziellerBereicheTageweise
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der tageweise ermittelten Punkte für einen stationären Krankenhausaufenthalt in speziellen Leistungsbereichen - z.B. in den Bereichen der Kinder- und Jugendpsychiatrie, der Akut-Nachbehandlung von neuro- logischen Patient:innen, der medizinischen Geriatrie, der Akutgeriatrie/Remobilisation sowie der palliativmedizinischen Einrichtungen - einzutragen.
Short	Punkte spezieller Bereiche - tageweise
Control	0..1
Binding	In dieses Datenfeld ist – soweit zutreffend – die Summe der tageweise ermittelten Punkte für einen stationären Krankenhausaufenthalt in speziellen Leistungsbereichen - z.B. in den Bereichen der Kinder- und Jugendpsychiatrie, der Akut-Nachbehandlung von neuro- logischen Patient:innen, der medizinischen Geriatrie, der Akutgeriatrie/Remobilisation sowie der palliativmedizinischen Einrichtungen - einzutragen.
44. Extension.extension:PunkteSpeziellerBereicheTageweise.extension
Control	0..0
46. Extension.extension:PunkteSpeziellerBereicheTageweise.url
Fixed Value	`PunkteSpeziellerBereicheTageweise`
48. Extension.extension:PunkteSpeziellerBereicheTageweise.value[x]
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
50. Extension.extension:PunkteTotal
Slice Name	PunkteTotal
Definition	In dieses Datenfeld ist die Gesamtsumme der für den stationären Aufenthalt/den ambulanten Besuch ermittelten Punkte einzutragen.
Short	Punkte total
Control	0..1
Binding	In dieses Datenfeld ist die Gesamtsumme der für den stationären Aufenthalt/den ambulanten Besuch ermittelten Punkte einzutragen.
52. Extension.extension:PunkteTotal.extension
Control	0..0
54. Extension.extension:PunkteTotal.url
Fixed Value	`PunkteTotal`
56. Extension.extension:PunkteTotal.value[x]
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
58. Extension.extension:Leistungskomponente
Slice Name	Leistungskomponente
Definition	In dieses Datenfeld ist – soweit zutreffend – die Leistungskomponente bzw. sind die Leistungspunkte einzutragen.
Short	Leistungskomponente/Leistungspunkte
Control	0..1
Binding	In dieses Datenfeld ist – soweit zutreffend – die Leistungskomponente bzw. sind die Leistungspunkte einzutragen.
60. Extension.extension:Leistungskomponente.extension
Control	0..0
62. Extension.extension:Leistungskomponente.url
Fixed Value	`Leistungskomponente`
64. Extension.extension:Leistungskomponente.value[x]
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
66. Extension.extension:TageskomponenteKontaktpunkte
Slice Name	TageskomponenteKontaktpunkte
Definition	In dieses Datenfeld ist – soweit zutreffend – die Tageskomponente bzw. sind die Kontakt- punkte einzutragen.
Short	Tageskomponente/Kontaktpunkte
Control	0..1
Binding	In dieses Datenfeld ist – soweit zutreffend – die Tageskomponente bzw. sind die Kontakt- punkte einzutragen.
68. Extension.extension:TageskomponenteKontaktpunkte.extension
Control	0..0
70. Extension.extension:TageskomponenteKontaktpunkte.url
Fixed Value	`TageskomponenteKontaktpunkte`
72. Extension.extension:TageskomponenteKontaktpunkte.value[x]
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
74. Extension.url
Fixed Value	`http://example.org/StructureDefinition/lkfPunkte`
76. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	In dieser Extension werden alle möglichen Punkteangaben im LKF zusammengefasst. Optional Extension Element - found in all resources.
Short	LKF PunkteOptional Extensions Element
Control	0..*
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente
Slice Name	PunkteBelagsdauerausreisserUntenLeistungskomponente
Definition	In dieses Datenfeld ist – soweit zutreffend – die ermittelte Leistungskomponente für jene Patient:innen einzutragen, deren Belagsdauer des akutstationären Krankenhausaufenthalts unter der im LKF-Modell in der jeweiligen LDF-Pauschale festgelegten Belagsdaueruntergrenze liegt.
Short	Punkte Belagsdauerausreisser unten - LeistungskomponenteAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
4. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`PunkteBelagsdauerausreisserUntenLeistungskomponente`
8. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente
Slice Name	PunkteBelagsdauerausreisserUntenTageskomponente
Definition	In dieses Datenfeld ist – soweit zutreffend – die ermittelte Tageskomponente für jene Patient:innen einzutragen, deren Belagsdauer des akutstationären Krankenhausaufenthalts unter der im LKF-Modell in der jeweiligen LDF-Pauschale festgelegten Belagsdaueruntergrenze liegt.
Short	Punkte Belagsdauerausreisser unten - TageskomponenteAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
14. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`PunkteBelagsdauerausreisserUntenTageskomponente`
16. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben
Slice Name	ZusatzpunkteBelagsdauerausreisserNachOben
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der tageweise ermittelten Zusatzpunkte für jene Patient:innen einzutragen, deren Belagsdauer des akut-stationären Krankenhausaufenthaltes über der im LKF-Modell in der jeweiligen LDF-Pauschale fest- gelegten Belagsdauerobergrenze liegt.
Short	Zusatzpunkte Belagsdauerausreißer nach obenAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`ZusatzpunkteBelagsdauerausreisserNachOben`
24. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Extension.extension:ZusatzpunkteIntensiv
Slice Name	ZusatzpunkteIntensiv
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der Zusatzpunkte für während des stationären Krankenhausaufenthalts angefallene Tage auf abrechnungsrelevanten Intensiveinheiten einzutragen.
Short	Zusatzpunkte IntensivAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Extension.extension:ZusatzpunkteIntensiv.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
30. Extension.extension:ZusatzpunkteIntensiv.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`ZusatzpunkteIntensiv`
32. Extension.extension:ZusatzpunkteIntensiv.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Extension.extension:ZusatzpunkteMehrfachleistungen
Slice Name	ZusatzpunkteMehrfachleistungen
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der Zusatzpunkte für zusätzliche Leistungen außerhalb des Punktepauschales der zur Abrechnung gelangenden Gruppe einzutragen.
Short	Zusatzpunkte MehrfachleistungenAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
36. Extension.extension:ZusatzpunkteMehrfachleistungen.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
38. Extension.extension:ZusatzpunkteMehrfachleistungen.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`ZusatzpunkteMehrfachleistungen`
40. Extension.extension:ZusatzpunkteMehrfachleistungen.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Extension.extension:PunkteSpeziellerBereicheTageweise
Slice Name	PunkteSpeziellerBereicheTageweise
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der tageweise ermittelten Punkte für einen stationären Krankenhausaufenthalt in speziellen Leistungsbereichen - z.B. in den Bereichen der Kinder- und Jugendpsychiatrie, der Akut-Nachbehandlung von neuro- logischen Patient:innen, der medizinischen Geriatrie, der Akutgeriatrie/Remobilisation sowie der palliativmedizinischen Einrichtungen - einzutragen.
Short	Punkte spezieller Bereiche - tageweiseAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
44. Extension.extension:PunkteSpeziellerBereicheTageweise.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
46. Extension.extension:PunkteSpeziellerBereicheTageweise.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`PunkteSpeziellerBereicheTageweise`
48. Extension.extension:PunkteSpeziellerBereicheTageweise.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Extension.extension:PunkteTotal
Slice Name	PunkteTotal
Definition	In dieses Datenfeld ist die Gesamtsumme der für den stationären Aufenthalt/den ambulanten Besuch ermittelten Punkte einzutragen.
Short	Punkte totalAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
52. Extension.extension:PunkteTotal.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
54. Extension.extension:PunkteTotal.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`PunkteTotal`
56. Extension.extension:PunkteTotal.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Extension.extension:Leistungskomponente
Slice Name	Leistungskomponente
Definition	In dieses Datenfeld ist – soweit zutreffend – die Leistungskomponente bzw. sind die Leistungspunkte einzutragen.
Short	Leistungskomponente/LeistungspunkteAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
60. Extension.extension:Leistungskomponente.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
62. Extension.extension:Leistungskomponente.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`Leistungskomponente`
64. Extension.extension:Leistungskomponente.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Extension.extension:TageskomponenteKontaktpunkte
Slice Name	TageskomponenteKontaktpunkte
Definition	In dieses Datenfeld ist – soweit zutreffend – die Tageskomponente bzw. sind die Kontakt- punkte einzutragen.
Short	Tageskomponente/KontaktpunkteAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
68. Extension.extension:TageskomponenteKontaktpunkte.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
70. Extension.extension:TageskomponenteKontaktpunkte.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`TageskomponenteKontaktpunkte`
72. Extension.extension:TageskomponenteKontaktpunkte.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://example.org/StructureDefinition/lkfPunkte`
76. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	In dieser Extension werden alle möglichen Punkteangaben im LKF zusammengefasst.
Short	LKF Punkte
Control	0..*
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente
Slice Name	PunkteBelagsdauerausreisserUntenLeistungskomponente
Definition	In dieses Datenfeld ist – soweit zutreffend – die ermittelte Leistungskomponente für jene Patient:innen einzutragen, deren Belagsdauer des akutstationären Krankenhausaufenthalts unter der im LKF-Modell in der jeweiligen LDF-Pauschale festgelegten Belagsdaueruntergrenze liegt.
Short	Punkte Belagsdauerausreisser unten - Leistungskomponente
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
10. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`PunkteBelagsdauerausreisserUntenLeistungskomponente`
14. Extension.extension:PunkteBelagsdauerausreisserUntenLeistungskomponente.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
16. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente
Slice Name	PunkteBelagsdauerausreisserUntenTageskomponente
Definition	In dieses Datenfeld ist – soweit zutreffend – die ermittelte Tageskomponente für jene Patient:innen einzutragen, deren Belagsdauer des akutstationären Krankenhausaufenthalts unter der im LKF-Modell in der jeweiligen LDF-Pauschale festgelegten Belagsdaueruntergrenze liegt.
Short	Punkte Belagsdauerausreisser unten - Tageskomponente
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
20. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`PunkteBelagsdauerausreisserUntenTageskomponente`
24. Extension.extension:PunkteBelagsdauerausreisserUntenTageskomponente.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben
Slice Name	ZusatzpunkteBelagsdauerausreisserNachOben
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der tageweise ermittelten Zusatzpunkte für jene Patient:innen einzutragen, deren Belagsdauer des akut-stationären Krankenhausaufenthaltes über der im LKF-Modell in der jeweiligen LDF-Pauschale fest- gelegten Belagsdauerobergrenze liegt.
Short	Zusatzpunkte Belagsdauerausreißer nach oben
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
30. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`ZusatzpunkteBelagsdauerausreisserNachOben`
34. Extension.extension:ZusatzpunkteBelagsdauerausreisserNachOben.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
36. Extension.extension:ZusatzpunkteIntensiv
Slice Name	ZusatzpunkteIntensiv
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der Zusatzpunkte für während des stationären Krankenhausaufenthalts angefallene Tage auf abrechnungsrelevanten Intensiveinheiten einzutragen.
Short	Zusatzpunkte Intensiv
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Extension.extension:ZusatzpunkteIntensiv.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
40. Extension.extension:ZusatzpunkteIntensiv.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:ZusatzpunkteIntensiv.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`ZusatzpunkteIntensiv`
44. Extension.extension:ZusatzpunkteIntensiv.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
46. Extension.extension:ZusatzpunkteMehrfachleistungen
Slice Name	ZusatzpunkteMehrfachleistungen
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der Zusatzpunkte für zusätzliche Leistungen außerhalb des Punktepauschales der zur Abrechnung gelangenden Gruppe einzutragen.
Short	Zusatzpunkte Mehrfachleistungen
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
48. Extension.extension:ZusatzpunkteMehrfachleistungen.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
50. Extension.extension:ZusatzpunkteMehrfachleistungen.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
52. Extension.extension:ZusatzpunkteMehrfachleistungen.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`ZusatzpunkteMehrfachleistungen`
54. Extension.extension:ZusatzpunkteMehrfachleistungen.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
56. Extension.extension:PunkteSpeziellerBereicheTageweise
Slice Name	PunkteSpeziellerBereicheTageweise
Definition	In dieses Datenfeld ist – soweit zutreffend – die Summe der tageweise ermittelten Punkte für einen stationären Krankenhausaufenthalt in speziellen Leistungsbereichen - z.B. in den Bereichen der Kinder- und Jugendpsychiatrie, der Akut-Nachbehandlung von neuro- logischen Patient:innen, der medizinischen Geriatrie, der Akutgeriatrie/Remobilisation sowie der palliativmedizinischen Einrichtungen - einzutragen.
Short	Punkte spezieller Bereiche - tageweise
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
58. Extension.extension:PunkteSpeziellerBereicheTageweise.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
60. Extension.extension:PunkteSpeziellerBereicheTageweise.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
62. Extension.extension:PunkteSpeziellerBereicheTageweise.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`PunkteSpeziellerBereicheTageweise`
64. Extension.extension:PunkteSpeziellerBereicheTageweise.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
66. Extension.extension:PunkteTotal
Slice Name	PunkteTotal
Definition	In dieses Datenfeld ist die Gesamtsumme der für den stationären Aufenthalt/den ambulanten Besuch ermittelten Punkte einzutragen.
Short	Punkte total
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
68. Extension.extension:PunkteTotal.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
70. Extension.extension:PunkteTotal.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
72. Extension.extension:PunkteTotal.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`PunkteTotal`
74. Extension.extension:PunkteTotal.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
76. Extension.extension:Leistungskomponente
Slice Name	Leistungskomponente
Definition	In dieses Datenfeld ist – soweit zutreffend – die Leistungskomponente bzw. sind die Leistungspunkte einzutragen.
Short	Leistungskomponente/Leistungspunkte
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
78. Extension.extension:Leistungskomponente.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
80. Extension.extension:Leistungskomponente.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
82. Extension.extension:Leistungskomponente.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`Leistungskomponente`
84. Extension.extension:Leistungskomponente.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
86. Extension.extension:TageskomponenteKontaktpunkte
Slice Name	TageskomponenteKontaktpunkte
Definition	In dieses Datenfeld ist – soweit zutreffend – die Tageskomponente bzw. sind die Kontakt- punkte einzutragen.
Short	Tageskomponente/Kontaktpunkte
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
88. Extension.extension:TageskomponenteKontaktpunkte.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
90. Extension.extension:TageskomponenteKontaktpunkte.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
92. Extension.extension:TageskomponenteKontaktpunkte.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`TageskomponenteKontaktpunkte`
94. Extension.extension:TageskomponenteKontaktpunkte.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	unsignedInt
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
96. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://example.org/StructureDefinition/lkfPunkte`
98. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)