HL7® Austria FHIR® Core Implementation Guide
1.1.0 - STU2

HL7® Austria FHIR® Core Implementation Guide - Local Development build (v1.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: HL7ATCorePractitionerRole - Detailed Descriptions

Active as of 2024-04-27

Definitions for the at-core-practitionerRole resource profile.

Guidance on how to interpret the contents of this table can be found here

0. PractitionerRole
2. PractitionerRole.practitioner
TypeReference(HL7® AT Core Practitioner Profile)
4. PractitionerRole.organization
TypeReference(HL7® AT Core Organization Profile)
6. PractitionerRole.code
BindingUnless not suitable, these codes SHALL be taken from https://termgit.elga.gv.at/ValueSet/hl7-at-practitionerrole
(extensible to https://termgit.elga.gv.at/ValueSet/hl7-at-practitionerrole)
8. PractitionerRole.contact
TypeExtendedContactDetail(HL7® AT Core ExtendedContactDetail Profile)

Guidance on how to interpret the contents of this table can be found here

0. PractitionerRole
Definition

A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

ShortRoles/organizations the practitioner is associated with
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. PractitionerRole.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. PractitionerRole.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. PractitionerRole.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. PractitionerRole.practitioner
Definition

Practitioner that is able to provide the defined services for the organization.

ShortPractitioner that provides services for the organization
Control0..1
TypeReference(HL7® AT Core Practitioner Profile, Practitioner)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. PractitionerRole.organization
Definition

The organization where the Practitioner performs the roles associated.

ShortOrganization where the roles are available
Control0..1
TypeReference(HL7® AT Core Organization Profile, Organization)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. PractitionerRole.code
Definition

Roles which this practitioner is authorized to perform for the organization.

ShortRoles which this practitioner may perform
Comments

A person may have more than one role.

Control0..*
BindingUnless not suitable, these codes SHALL be taken from For example codes, see https://termgit.elga.gv.at/ValueSet/hl7-at-practitionerrolehttp://hl7.org/fhir/ValueSet/practitioner-role
(extensible to https://termgit.elga.gv.at/ValueSet/hl7-at-practitionerrole)
TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Need to know what authority the practitioner has - what can they do?

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. PractitionerRole.contact
Definition

Specifies contact information for a specific purpose over a period of time, might be handled/monitored by a specific named person or organization.


The contact details of communication devices available relevant to the specific PractitionerRole. This can include addresses, phone numbers, fax numbers, mobile numbers, email addresses and web sites.

ShortContact informationOfficial contact details relating to this PractitionerRole
Comments

This datatype may be sparsely populated, i.e. only contain a purpose and phone number or address, but other cases could be completed filled out.

Control0..*
TypeExtendedContactDetail(HL7® AT Core ExtendedContactDetail Profile)
Is Modifierfalse
Must Supportfalse
Requirements

Often practitioners have a dedicated line for each location (or service) that they work at, and need to be able to define separate contact details for each of these. Sometimes these also include a named person/organization that handles contact for specific purposes, such as a receptionist, or accounts clerk etc.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. PractitionerRole
Definition

A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

ShortRoles/organizations the practitioner is associated with
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. PractitionerRole.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

Control0..1
Typeid
Is Modifierfalse
Must Supportfalse
Summarytrue
4. PractitionerRole.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. PractitionerRole.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. PractitionerRole.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHALL be taken from AllLanguages
(required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

IETF language tag for a human language

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. PractitionerRole.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
This element is affected by the following invariants: dom-6
TypeNarrative
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. PractitionerRole.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. PractitionerRole.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. PractitionerRole.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. PractitionerRole.identifier
Definition

Business Identifiers that are specific to a role/location.

ShortIdentifiers for a role/location
Comments

A specific identifier value (e.g. Minnesota Registration ID) may appear on multiple PractitionerRole instances which could be for different periods, or different Roles (or other reasons). A specific identifier may be included multiple times in the same PractitionerRole instance with different identifier validity periods.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Often, specific identities are assigned for the agent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. PractitionerRole.active
Definition

Whether this practitioner role record is in active use. Some systems may use this property to mark non-active practitioners, such as those that are not currently employed.

ShortWhether this practitioner role record is in active use
Comments

If this value is false, you may refer to the period to see when the role was in active use. If there is no period specified, no inference can be made about when it was active.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Need to be able to mark a practitioner role record as not to be used because it was created in error, or otherwise no longer in active use.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. PractitionerRole.period
Definition

The period during which the person is authorized to act as a practitioner in these role(s) for the organization.

ShortThe period during which the practitioner is authorized to perform in these role(s)
Comments

If a practitioner is performing a role within an organization over multiple, non-adjacent periods, there should be a distinct PractitionerRole instance for each period. For example, if a nurse is employed at a hospital, leaves the organization for a period of time due to pandemic related stress, but returns post-pandemic to the same job role, there would be two PractitionerRole instances for the different periods of employment.

Control0..1
TypePeriod
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Even after the agencies is revoked, the fact that it existed must still be recorded.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. PractitionerRole.practitioner
Definition

Practitioner that is able to provide the defined services for the organization.

ShortPractitioner that provides services for the organization
Control0..1
TypeReference(HL7® AT Core Practitioner Profile)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. PractitionerRole.organization
Definition

The organization where the Practitioner performs the roles associated.

ShortOrganization where the roles are available
Control0..1
TypeReference(HL7® AT Core Organization Profile)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. PractitionerRole.code
Definition

Roles which this practitioner is authorized to perform for the organization.

ShortRoles which this practitioner may perform
Comments

A person may have more than one role.

Control0..*
BindingUnless not suitable, these codes SHALL be taken from https://termgit.elga.gv.at/ValueSet/hl7-at-practitionerrole
(extensible to https://termgit.elga.gv.at/ValueSet/hl7-at-practitionerrole)
TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Need to know what authority the practitioner has - what can they do?

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. PractitionerRole.specialty
Definition

The specialty of a practitioner that describes the functional role they are practicing at a given organization or location.

ShortSpecific specialty of the practitioner
Comments

The specialty represents the functional role a practitioner is playing within an organization/location. This role may require the individual have certain qualifications, which would be represented in the Practitioner.qualifications property. Note that qualifications may or might not relate to or be required by the practicing specialty.

Control0..*
BindingThe codes SHOULD be taken from PracticeSettingCodeValueSet
(preferred to http://hl7.org/fhir/ValueSet/c80-practice-codes)

Specific specialty associated with the agency.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. PractitionerRole.location
Definition

The location(s) at which this practitioner provides care.

ShortLocation(s) where the practitioner provides care
Control0..*
TypeReference(Location)
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. PractitionerRole.healthcareService
Definition

The list of healthcare services that this worker provides for this role's Organization/Location(s).

ShortHealthcare services provided for this role's Organization/Location(s)
Control0..*
TypeReference(HealthcareService)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. PractitionerRole.contact
Definition

Specifies contact information for a specific purpose over a period of time, might be handled/monitored by a specific named person or organization.

ShortContact information
Comments

This datatype may be sparsely populated, i.e. only contain a purpose and phone number or address, but other cases could be completed filled out.

Control0..*
TypeExtendedContactDetail(HL7® AT Core ExtendedContactDetail Profile)
Is Modifierfalse
Must Supportfalse
Requirements

Often practitioners have a dedicated line for each location (or service) that they work at, and need to be able to define separate contact details for each of these. Sometimes these also include a named person/organization that handles contact for specific purposes, such as a receptionist, or accounts clerk etc.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. PractitionerRole.characteristic
Definition

Collection of characteristics (attributes).

ShortCollection of characteristics (attributes)
Comments

These could be such things as is the service mode used by this role.

Control0..*
BindingFor example codes, see ServiceMode
(example to http://hl7.org/fhir/ValueSet/service-mode)

A custom attribute that could be provided at a service (e.g. Wheelchair accessibility).

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. PractitionerRole.communication
Definition

A language the practitioner can use in patient communication. The practitioner may know several languages (listed in practitioner.communication), however these are the languages that could be advertised in a directory for a patient to search.

ShortA language the practitioner (in this role) can use in patient communication
Comments

The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

Note that for non-patient oriented communication, see Practitioner.communication. Note that all 'person' type resources (Person, RelatedPerson, Patient, Practitioner) have a communication structure that includes preferences. Role or service oriented resources such as HealthcareService and PractitionerRole only include languages that are available for interacting with patients.

Control0..*
BindingThe codes SHALL be taken from AllLanguages
(required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

IETF language tag for a human language

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

Knowing which language a practitioner speaks can help in facilitating patients to locate practitioners that speak their language.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. PractitionerRole.availability
Definition

A collection of times the practitioner is available or performing this role at the location and/or healthcareservice.

ShortTimes the Practitioner is available at this location and/or healthcare service (including exceptions)
Comments

More detailed availability information may be provided in associated Schedule/Slot resources.

Systems may choose to render availability differently than it is exchanged on the interface. For example, rather than "Mon, Tue, Wed, Thur, Fri from 9am-12am; Mon, Tue, Wed, Thur, Fri from 1pm-5pm" as would be implied by two availableTime repetitions, an application could render this information as "Mon-Fri 9-12am and 1-5pm".

The NotAvailableTime(s) included indicate the general days/periods where the practitioner is not available (for things such as vacation time, or public holidays).

Control0..*
TypeAvailability
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. PractitionerRole.endpoint
Definition

Technical endpoints providing access to services operated for the practitioner with this role. Commonly used for locating scheduling services, or identifying where to send referrals electronically.

ShortEndpoints for interacting with the practitioner in this role
Control0..*
TypeReference(Endpoint)
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

Organizations have multiple systems that provide various services and may also be different for practitioners too.

So the endpoint satisfies the need to be able to define the technical connection details for how to connect to them, and for what purpose.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))