Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED)
0.1.0 - ci-build

Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED) - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: MopedARKResponse - Detailed Descriptions

Draft as of 2025-07-11

Definitions for the MopedARKResponse resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. ClaimResponse
Definition

This resource provides the adjudication details from the processing of a Claim resource.

ShortResponse to a claim predetermination or preauthorization
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesRemittance Advice
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. ClaimResponse.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. ClaimResponse.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. ClaimResponse.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ClaimResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. ClaimResponse.extension:AbrechnungsartAuslaenderverrechnung
    Slice NameAbrechnungsartAuslaenderverrechnung
    Definition

    Abrechnungsart Ausländerverrechnung

    ShortAbrechnungsart Ausländerverrechnung
    Control0..1
    TypeExtension(Abrechnungsart Ausländerverrechnung) (Extension Type: Coding)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. ClaimResponse.extension:Betreuungsschein
    Slice NameBetreuungsschein
    Definition

    MOPED Extension für den Betreuungsschein bei Ausländerverrechnung

    ShortBetreuungsschein bei Ausländerverrechnung
    Control0..1
    TypeExtension(Betreuungsschein bei Ausländerverrechnung) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. ClaimResponse.extension:SupportingInfo
    Slice NameSupportingInfo
    Definition

    Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues

    ShortSupporting Info Extension for ClaimResponse
    Control0..*
    TypeExtension(Supporting Info Extension for ClaimResponse) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. ClaimResponse.extension:MopedSupportingInfoFREMDRE
    Slice NameMopedSupportingInfoFREMDRE
    Definition

    Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues

    ShortSupporting Info Extension for ClaimResponse - FREMDRE Slice
    Control0..1
    TypeExtension(Supporting Info Extension for ClaimResponse - FREMDRE Slice) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. ClaimResponse.extension:MopedSupportingInfoOEGKELBNR
    Slice NameMopedSupportingInfoOEGKELBNR
    Definition

    Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues

    ShortSupporting Info Extension for ClaimResponse - OEGKELBNR Slice
    Control0..1
    TypeExtension(Supporting Info Extension for ClaimResponse - OEGKELBNR Slice) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. ClaimResponse.extension:Beihilfenaequivalent
    Slice NameBeihilfenaequivalent
    Definition

    MOPED Extension für das Beihilfenaequivalent

    ShortBeihilfenaequivalent
    Control0..1
    TypeExtension(Beihilfenaequivalent) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. ClaimResponse.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Must Supportfalse
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. ClaimResponse.status
    Definition

    The status of the resource instance.

    Shortactive | cancelled | draft | entered-in-error
    Comments

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|5.0.0
    (required to http://hl7.org/fhir/ValueSet/fm-status|5.0.0)

    A code specifying the state of the resource instance.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. ClaimResponse.type
    Definition

    A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

    ShortMore granular claim type
    Comments

    This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodeshttp://hl7.org/fhir/ValueSet/claim-type
    (extensible to http://hl7.org/fhir/ValueSet/claim-type)

    The type or discipline-style of the claim.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    Some jurisdictions need a finer grained claim type for routing and adjudication.

    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
        "code" : "institutional"
      }]
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. ClaimResponse.subType
    Definition

    A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

    ShortKostenmeldung für Ausländerverrechnung, Regressangelegenheiten und KosteninformationMore granular claim type
    Comments

    This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

    Control10..1
    BindingThe codes SHALL be taken from For example codes, see Kostenmeldung für (A/R/K)http://hl7.org/fhir/ValueSet/claim-subtype
    (required to https://elga.moped.at/ValueSet/KostenmeldungARKVS)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Requirements

    Some jurisdictions need a finer grained claim type for routing and adjudication.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. ClaimResponse.use
    Definition

    A code to indicate whether the nature of the request is: Claim - A request to an Insurer to adjudicate the supplied charges for health care goods and services under the identified policy and to pay the determined Benefit amount, if any; Preauthorization - A request to an Insurer to adjudicate the supplied proposed future charges for health care goods and services under the identified policy and to approve the services and provide the expected benefit amounts and potentially to reserve funds to pay the benefits when Claims for the indicated services are later submitted; or, Pre-determination - A request to an Insurer to adjudicate the supplied 'what if' charges for health care goods and services under the identified policy and report back what the Benefit payable would be had the services actually been provided.

    Shortclaim | preauthorization | predetermination
    Control1..1
    BindingThe codes SHALL be taken from Usehttp://hl7.org/fhir/ValueSet/claim-use|5.0.0
    (required to http://hl7.org/fhir/ValueSet/claim-use|5.0.0)

    Claim, preauthorization, predetermination.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    This element is required to understand the nature of the request for adjudication.

    Pattern Valueclaim
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. ClaimResponse.patient
    Definition

    The party to whom the professional services and/or products have been supplied or are being considered and for whom actual for facast reimbursement is sought.

    ShortThe recipient of the products and services
    Control1..1
    TypeReference(HL7® AT Core Patient Profile, Patient)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    The patient must be supplied to the insurer so that confirmation of coverage and service hstory may be considered as part of the authorization and/or adjudiction.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. ClaimResponse.created
    Definition

    The date this resource was created.

    ShortResponse creation date
    Control1..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    Need to record a timestamp for use by both the recipient and the issuer.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. ClaimResponse.request
    Definition

    Original request resource reference.

    ShortId of resource triggering adjudication
    Control10..1
    TypeReference(MOPED ARKRequest, Claim)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. ClaimResponse.outcome
    Definition

    The outcome of the claim, predetermination, or preauthorization processing.

    Shortqueued | complete | error | partial
    Comments

    The resource may be used to indicate that the Claim/Preauthorization/Pre-determination has been received but processing has not begun (queued); that it has been processed and one or more errors have been detected (error); no errors were detected and some of the adjudication processing has been performed (partial); or all of the adjudication processing has completed without errors (complete).

    Control1..1
    BindingThe codes SHALL be taken from ClaimProcessingCodeshttp://hl7.org/fhir/ValueSet/claim-outcome|5.0.0
    (required to http://hl7.org/fhir/ValueSet/claim-outcome|5.0.0)

    The result of the claim processing.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    To advise the requestor of an overall processing outcome.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. ClaimResponse.addItem
    Definition

    The first-tier service adjudications for payor added product or service lines.

    ShortInsurer added line items
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Requirements

    Insurers may redefine the provided product or service or may package and/or decompose groups of products and services. The addItems allows the insurer to provide their line item list with linkage to the submitted items/details/sub-details. In a preauthorization the insurer may use the addItem structure to provide additional information on authorized products and services.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on ClaimResponse.addItem. The slices areOrdered and Open, and can be differentiated using the following discriminators:
    • value @ extension('https://elga.moped.at/StructureDefinition/moped-ext-AddItemCategory').value.coding
    • 40. ClaimResponse.addItem.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on ClaimResponse.addItem.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 42. ClaimResponse.addItem.extension:AddItemCategory
        Slice NameAddItemCategory
        Definition

        Benefit classification

        ShortAddItemCategory
        Control0..1
        TypeExtension(AddItemCategory) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        44. ClaimResponse.addItem.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        46. ClaimResponse.addItem:Patientenanteil
        Slice NamePatientenanteil
        Definition

        The first-tier service adjudications for payor added product or service lines.

        ShortInsurer added line items
        Control0..1*
        TypeBackboneElement
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Requirements

        Insurers may redefine the provided product or service or may package and/or decompose groups of products and services. The addItems allows the insurer to provide their line item list with linkage to the submitted items/details/sub-details. In a preauthorization the insurer may use the addItem structure to provide additional information on authorized products and services.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory
        Slice NameAddItemCategory
        Definition

        Benefit classification

        ShortAddItemCategory
        Control0..1
        TypeExtension(AddItemCategory) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        50. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.extension
        Definition

        An Extension


        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortExtensionAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..0*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on ClaimResponse.addItem.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 52. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.url
          Definition

          Source of the definition for the extension code - a logical name or a URL.

          Shortidentifies the meaning of the extension
          Comments

          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

          Control1..1
          Typeuri
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          Fixed Valuehttps://elga.moped.at/StructureDefinition/moped-ext-AddItemCategory
          54. ClaimResponse.addItem:Patientenanteil.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          56. ClaimResponse.addItem:Patientenanteil.unitPrice
          Definition

          If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

          ShortPatientenanteil für Angehörige (tägl. Satz) nettoFee, charge or cost per item
          Control10..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          The amount charged to the patient by the provider for a single unit.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. ClaimResponse.addItem:Patientenanteil.factor
          Definition

          A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

          ShortPrice scaling factor
          Comments

          To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

          Control0..1
          Typedecimal
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Requirements

          When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

          Pattern Value-1
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. ClaimResponse.addItem:Patientenanteil.net
          Definition

          The total amount claimed for the group (if a grouper) or the addItem. Net = unit price * quantity * factor.

          ShortPatientenanteil nettoTotal item cost
          Comments

          For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

          Control10..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Requirements

          Provides the total amount claimed for the group (if a grouper) or the line item.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. ClaimResponse.total
          Definition

          Categorized monetary totals for the adjudication.

          ShortForderungsbetrag für Ausländerverrechnung/RegresseAdjudication totals
          Comments

          Totals for amounts submitted, co-pays, benefits payable etc.

          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          To provide the requestor with financial totals by category for the adjudication.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          64. ClaimResponse.total.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          66. ClaimResponse.total.category
          Definition

          A code to indicate the information type of this adjudication record. Information types may include: the value submitted, maximum values or percentages allowed or payable under the plan, amounts that the patient is responsible for in aggregate or pertaining to this item, amounts paid by other coverages, and the benefit payable for this item.

          ShortType of adjudication information
          Comments

          For example codes indicating: Co-Pay, deductible, eligible, benefit, tax, etc.

          Control1..1
          BindingFor example codes, see AdjudicationValueCodeshttp://hl7.org/fhir/ValueSet/adjudication
          (example to http://hl7.org/fhir/ValueSet/adjudication)

          The adjudication codes.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          Needed to convey the type of total provided.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          68. ClaimResponse.total.amount
          Definition

          Monetary total amount associated with the category.

          ShortFinancial total for the category
          Control1..1
          TypeMoney
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          Needed to convey the total monetary amount.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

          Guidance on how to interpret the contents of this table can be foundhere

          0. ClaimResponse
          2. ClaimResponse.extension
          SlicingThis element introduces a set of slices on ClaimResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 4. ClaimResponse.extension:AbrechnungsartAuslaenderverrechnung
            Slice NameAbrechnungsartAuslaenderverrechnung
            Control0..1
            TypeExtension(Abrechnungsart Ausländerverrechnung) (Extension Type: Coding)
            6. ClaimResponse.extension:Betreuungsschein
            Slice NameBetreuungsschein
            Control0..1
            TypeExtension(Betreuungsschein bei Ausländerverrechnung) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
            8. ClaimResponse.extension:SupportingInfo
            Slice NameSupportingInfo
            Control0..*
            TypeExtension(Supporting Info Extension for ClaimResponse) (Complex Extension)
            10. ClaimResponse.extension:MopedSupportingInfoFREMDRE
            Slice NameMopedSupportingInfoFREMDRE
            Control0..1
            TypeExtension(Supporting Info Extension for ClaimResponse - FREMDRE Slice) (Complex Extension)
            12. ClaimResponse.extension:MopedSupportingInfoOEGKELBNR
            Slice NameMopedSupportingInfoOEGKELBNR
            Control0..1
            TypeExtension(Supporting Info Extension for ClaimResponse - OEGKELBNR Slice) (Complex Extension)
            14. ClaimResponse.extension:Beihilfenaequivalent
            Slice NameBeihilfenaequivalent
            Control0..1
            TypeExtension(Beihilfenaequivalent) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
            16. ClaimResponse.type
            Pattern Value{
              "coding" : [{
                "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
                "code" : "institutional"
              }]
            }
            18. ClaimResponse.subType
            ShortKostenmeldung für Ausländerverrechnung, Regressangelegenheiten und Kosteninformation
            Control1..?
            BindingThe codes SHALL be taken from Kostenmeldung für (A/R/K)
            (required to https://elga.moped.at/ValueSet/KostenmeldungARKVS)
            20. ClaimResponse.use
            Pattern Valueclaim
            22. ClaimResponse.patient
            TypeReference(HL7® AT Core Patient Profile)
            24. ClaimResponse.request
            Control1..?
            TypeReference(MOPED ARKRequest)
            26. ClaimResponse.addItem
            SlicingThis element introduces a set of slices on ClaimResponse.addItem. The slices areOrdered and Open, and can be differentiated using the following discriminators:
            • value @ extension('https://elga.moped.at/StructureDefinition/moped-ext-AddItemCategory').value.coding
            • 28. ClaimResponse.addItem.extension
              SlicingThis element introduces a set of slices on ClaimResponse.addItem.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 30. ClaimResponse.addItem.extension:AddItemCategory
                Slice NameAddItemCategory
                Control0..1
                TypeExtension(AddItemCategory) (Extension Type: CodeableConcept)
                32. ClaimResponse.addItem:Patientenanteil
                Slice NamePatientenanteil
                Control0..1
                34. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory
                Slice NameAddItemCategory
                Control0..1
                TypeExtension(AddItemCategory) (Extension Type: CodeableConcept)
                36. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.value[x]
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                38. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.value[x].coding
                Pattern Value{
                  "system" : "https://elga.moped.at/CodeSystem/MopedClaimItemCategoryCS",
                  "code" : "Patientenanteil"
                }
                40. ClaimResponse.addItem:Patientenanteil.unitPrice
                ShortPatientenanteil für Angehörige (tägl. Satz) netto
                Control1..?
                42. ClaimResponse.addItem:Patientenanteil.factor
                Pattern Value-1
                44. ClaimResponse.addItem:Patientenanteil.net
                ShortPatientenanteil netto
                Control1..?
                46. ClaimResponse.total
                ShortForderungsbetrag für Ausländerverrechnung/Regresse

                Guidance on how to interpret the contents of this table can be foundhere

                0. ClaimResponse
                Definition

                This resource provides the adjudication details from the processing of a Claim resource.

                ShortResponse to a claim predetermination or preauthorization
                Control0..*
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Alternate NamesRemittance Advice
                Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                dom-6: A resource should have narrative for robust management (text.`div`.exists())
                2. ClaimResponse.id
                Definition

                The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                ShortLogical id of this artifact
                Comments

                Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

                Control0..1
                Typeid
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                4. ClaimResponse.meta
                Definition

                The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                ShortMetadata about the resource
                Control0..1
                TypeMeta
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                6. ClaimResponse.implicitRules
                Definition

                A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                ShortA set of rules under which this content was created
                Comments

                Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

                Control0..1
                Typeuri
                Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                8. ClaimResponse.language
                Definition

                The base language in which the resource is written.

                ShortLanguage of the resource content
                Comments

                Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                Control0..1
                BindingThe codes SHALL be taken from AllLanguages
                (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

                IETF language tag for a human language

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                10. ClaimResponse.text
                Definition

                A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                ShortText summary of the resource, for human interpretation
                Comments

                Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                Control0..1
                This element is affected by the following invariants: dom-6
                TypeNarrative
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Alternate Namesnarrative, html, xhtml, display
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                12. ClaimResponse.contained
                Definition

                These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

                ShortContained, inline Resources
                Comments

                This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

                Control0..*
                This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
                TypeResource
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Alternate Namesinline resources, anonymous resources, contained resources
                14. ClaimResponse.extension
                Definition

                An Extension

                ShortExtension
                Control0..*
                TypeExtension
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on ClaimResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 16. ClaimResponse.extension:AbrechnungsartAuslaenderverrechnung
                  Slice NameAbrechnungsartAuslaenderverrechnung
                  Definition

                  Abrechnungsart Ausländerverrechnung

                  ShortAbrechnungsart Ausländerverrechnung
                  Control0..1
                  TypeExtension(Abrechnungsart Ausländerverrechnung) (Extension Type: Coding)
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  18. ClaimResponse.extension:Betreuungsschein
                  Slice NameBetreuungsschein
                  Definition

                  MOPED Extension für den Betreuungsschein bei Ausländerverrechnung

                  ShortBetreuungsschein bei Ausländerverrechnung
                  Control0..1
                  TypeExtension(Betreuungsschein bei Ausländerverrechnung) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  20. ClaimResponse.extension:SupportingInfo
                  Slice NameSupportingInfo
                  Definition

                  Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues

                  ShortSupporting Info Extension for ClaimResponse
                  Control0..*
                  TypeExtension(Supporting Info Extension for ClaimResponse) (Complex Extension)
                  Is Modifierfalse
                  Must Supportfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  22. ClaimResponse.extension:MopedSupportingInfoFREMDRE
                  Slice NameMopedSupportingInfoFREMDRE
                  Definition

                  Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues

                  ShortSupporting Info Extension for ClaimResponse - FREMDRE Slice
                  Control0..1
                  TypeExtension(Supporting Info Extension for ClaimResponse - FREMDRE Slice) (Complex Extension)
                  Is Modifierfalse
                  Must Supportfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  24. ClaimResponse.extension:MopedSupportingInfoOEGKELBNR
                  Slice NameMopedSupportingInfoOEGKELBNR
                  Definition

                  Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues

                  ShortSupporting Info Extension for ClaimResponse - OEGKELBNR Slice
                  Control0..1
                  TypeExtension(Supporting Info Extension for ClaimResponse - OEGKELBNR Slice) (Complex Extension)
                  Is Modifierfalse
                  Must Supportfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  26. ClaimResponse.extension:Beihilfenaequivalent
                  Slice NameBeihilfenaequivalent
                  Definition

                  MOPED Extension für das Beihilfenaequivalent

                  ShortBeihilfenaequivalent
                  Control0..1
                  TypeExtension(Beihilfenaequivalent) (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta)
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  28. ClaimResponse.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  30. ClaimResponse.identifier
                  Definition

                  A unique identifier assigned to this claim response.

                  ShortBusiness Identifier for a claim response
                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..*
                  TypeIdentifier
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Allows claim responses to be distinguished and referenced.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  32. ClaimResponse.traceNumber
                  Definition

                  Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                  ShortNumber for tracking
                  Control0..*
                  TypeIdentifier
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Allows partners to uniquely identify components for tracking.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  34. ClaimResponse.status
                  Definition

                  The status of the resource instance.

                  Shortactive | cancelled | draft | entered-in-error
                  Comments

                  This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

                  Control1..1
                  BindingThe codes SHALL be taken from FinancialResourceStatusCodes
                  (required to http://hl7.org/fhir/ValueSet/fm-status|5.0.0)

                  A code specifying the state of the resource instance.

                  Typecode
                  Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  36. ClaimResponse.type
                  Definition

                  A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

                  ShortMore granular claim type
                  Comments

                  This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

                  Control1..1
                  BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodes
                  (extensible to http://hl7.org/fhir/ValueSet/claim-type)

                  The type or discipline-style of the claim.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  Some jurisdictions need a finer grained claim type for routing and adjudication.

                  Pattern Value{
                    "coding" : [{
                      "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
                      "code" : "institutional"
                    }]
                  }
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  38. ClaimResponse.subType
                  Definition

                  A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

                  ShortKostenmeldung für Ausländerverrechnung, Regressangelegenheiten und Kosteninformation
                  Comments

                  This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

                  Control1..1
                  BindingThe codes SHALL be taken from Kostenmeldung für (A/R/K)
                  (required to https://elga.moped.at/ValueSet/KostenmeldungARKVS)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Some jurisdictions need a finer grained claim type for routing and adjudication.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  40. ClaimResponse.use
                  Definition

                  A code to indicate whether the nature of the request is: Claim - A request to an Insurer to adjudicate the supplied charges for health care goods and services under the identified policy and to pay the determined Benefit amount, if any; Preauthorization - A request to an Insurer to adjudicate the supplied proposed future charges for health care goods and services under the identified policy and to approve the services and provide the expected benefit amounts and potentially to reserve funds to pay the benefits when Claims for the indicated services are later submitted; or, Pre-determination - A request to an Insurer to adjudicate the supplied 'what if' charges for health care goods and services under the identified policy and report back what the Benefit payable would be had the services actually been provided.

                  Shortclaim | preauthorization | predetermination
                  Control1..1
                  BindingThe codes SHALL be taken from Use
                  (required to http://hl7.org/fhir/ValueSet/claim-use|5.0.0)

                  Claim, preauthorization, predetermination.

                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  This element is required to understand the nature of the request for adjudication.

                  Pattern Valueclaim
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  42. ClaimResponse.patient
                  Definition

                  The party to whom the professional services and/or products have been supplied or are being considered and for whom actual for facast reimbursement is sought.

                  ShortThe recipient of the products and services
                  Control1..1
                  TypeReference(HL7® AT Core Patient Profile)
                  Is Modifierfalse
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  The patient must be supplied to the insurer so that confirmation of coverage and service hstory may be considered as part of the authorization and/or adjudiction.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  44. ClaimResponse.created
                  Definition

                  The date this resource was created.

                  ShortResponse creation date
                  Control1..1
                  TypedateTime
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  Need to record a timestamp for use by both the recipient and the issuer.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  46. ClaimResponse.insurer
                  Definition

                  The party responsible for authorization, adjudication and reimbursement.

                  ShortParty responsible for reimbursement
                  Control0..1
                  TypeReference(Organization)
                  Is Modifierfalse
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  To be a valid claim, preauthorization or predetermination there must be a party who is responsible for adjudicating the contents against a policy which provides benefits for the patient.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  48. ClaimResponse.requestor
                  Definition

                  The provider which is responsible for the claim, predetermination or preauthorization.

                  ShortParty responsible for the claim
                  Comments

                  Typically this field would be 1..1 where this party is accountable for the data content within the claim but is not necessarily the facility, provider group or practitioner who provided the products and services listed within this claim resource. This field is the Billing Provider, for example, a facility, provider group, lab or practitioner..

                  Control0..1
                  TypeReference(Practitioner, PractitionerRole, Organization)
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  50. ClaimResponse.request
                  Definition

                  Original request resource reference.

                  ShortId of resource triggering adjudication
                  Control1..1
                  TypeReference(MOPED ARKRequest)
                  Is Modifierfalse
                  Must Supportfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  52. ClaimResponse.outcome
                  Definition

                  The outcome of the claim, predetermination, or preauthorization processing.

                  Shortqueued | complete | error | partial
                  Comments

                  The resource may be used to indicate that the Claim/Preauthorization/Pre-determination has been received but processing has not begun (queued); that it has been processed and one or more errors have been detected (error); no errors were detected and some of the adjudication processing has been performed (partial); or all of the adjudication processing has completed without errors (complete).

                  Control1..1
                  BindingThe codes SHALL be taken from ClaimProcessingCodes
                  (required to http://hl7.org/fhir/ValueSet/claim-outcome|5.0.0)

                  The result of the claim processing.

                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  To advise the requestor of an overall processing outcome.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  54. ClaimResponse.decision
                  Definition

                  The result of the claim, predetermination, or preauthorization adjudication.

                  ShortResult of the adjudication
                  Comments

                  The element is used to indicate the current state of the adjudication overall for the claim resource, for example: the request has been held (pended) for adjudication processing, for manual review or other reasons; that it has been processed and will be paid, or the outstanding paid, as submitted (approved); that no amount will be paid (denied); or that some amount between zero and the submitted amount will be paid (partial).

                  Control0..1
                  BindingFor example codes, see ClaimAdjudicationDecisionsCodes
                  (example to http://hl7.org/fhir/ValueSet/claim-decision)

                  The overall result of the claim adjudication.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summarytrue
                  Requirements

                  To advise the requestor of the result of the adjudication process.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  56. ClaimResponse.disposition
                  Definition

                  A human readable description of the status of the adjudication.

                  ShortDisposition Message
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Provided for user display.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  58. ClaimResponse.preAuthRef
                  Definition

                  Reference from the Insurer which is used in later communications which refers to this adjudication.

                  ShortPreauthorization reference
                  Comments

                  This value is only present on preauthorization adjudications.

                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  On subsequent claims, the insurer may require the provider to quote this value.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  60. ClaimResponse.preAuthPeriod
                  Definition

                  The time frame during which this authorization is effective.

                  ShortPreauthorization reference effective period
                  Control0..1
                  TypePeriod
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  To convey to the provider when the authorized products and services must be supplied for the authorized adjudication to apply.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  62. ClaimResponse.event
                  Definition

                  Information code for an event with a corresponding date or period.

                  ShortEvent information
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  64. ClaimResponse.event.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  66. ClaimResponse.event.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  68. ClaimResponse.event.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  70. ClaimResponse.event.type
                  Definition

                  A coded event such as when a service is expected or a card printed.

                  ShortSpecific event
                  Control1..1
                  BindingFor example codes, see DatesTypeCodes
                  (example to http://hl7.org/fhir/ValueSet/datestype)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  72. ClaimResponse.event.when[x]
                  Definition

                  A date or period in the past or future indicating when the event occurred or is expectd to occur.

                  ShortOccurance date or period
                  Control1..1
                  TypeChoice of: dateTime, Period
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  74. ClaimResponse.payeeType
                  Definition

                  Type of Party to be reimbursed: subscriber, provider, other.

                  ShortParty to be paid any benefits payable
                  Control0..1
                  BindingFor example codes, see ClaimPayeeTypeCodes
                  (example to http://hl7.org/fhir/ValueSet/payeetype)

                  A code for the party to be reimbursed.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Need to know who should receive payment with the most common situations being the Provider (assignment of benefits) or the Subscriber.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  76. ClaimResponse.encounter
                  Definition

                  Healthcare encounters related to this claim.

                  ShortEncounters associated with the listed treatments
                  Comments

                  This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

                  Control0..*
                  TypeReference(Encounter)
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Used in some jurisdictions to link clinical events to claim items.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  78. ClaimResponse.diagnosisRelatedGroup
                  Definition

                  A package billing code or bundle code used to group products and services to a particular health condition (such as heart attack) which is based on a predetermined grouping code system.

                  ShortPackage billing code
                  Comments

                  For example DRG (Diagnosis Related Group) or a bundled billing code. A patient may have a diagnosis of a Myocardial Infarction and a DRG for HeartAttack would be assigned. The Claim item (and possible subsequent claims) would refer to the DRG for those line items that were for services related to the heart attack event.

                  Control0..1
                  BindingFor example codes, see ExampleDiagnosisRelatedGroupCodes
                  (example to http://hl7.org/fhir/ValueSet/ex-diagnosisrelatedgroup)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Required to relate the current diagnosis to a package billing code that is then referenced on the individual claim items which are specific to the health condition covered by the package code.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  80. ClaimResponse.item
                  Definition

                  A claim line. Either a simple (a product or service) or a 'group' of details which can also be a simple items or groups of sub-details.

                  ShortAdjudication for claim line items
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  The adjudication for items provided on the claim.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  82. ClaimResponse.item.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  84. ClaimResponse.item.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  86. ClaimResponse.item.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  88. ClaimResponse.item.itemSequence
                  Definition

                  A number to uniquely reference the claim item entries.

                  ShortClaim item instance identifier
                  Control1..1
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Necessary to provide a mechanism to link the adjudication result to the submitted claim item.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  90. ClaimResponse.item.traceNumber
                  Definition

                  Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                  ShortNumber for tracking
                  Control0..*
                  TypeIdentifier
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Allows partners to uniquely identify components for tracking.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  92. ClaimResponse.item.noteNumber
                  Definition

                  The numbers associated with notes below which apply to the adjudication of this item.

                  ShortApplicable note numbers
                  Control0..*
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  94. ClaimResponse.item.reviewOutcome
                  Definition

                  The high-level results of the adjudication if adjudication has been performed.

                  ShortAdjudication results
                  Control0..1
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  96. ClaimResponse.item.reviewOutcome.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  98. ClaimResponse.item.reviewOutcome.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  100. ClaimResponse.item.reviewOutcome.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  102. ClaimResponse.item.reviewOutcome.decision
                  Definition

                  The result of the claim, predetermination, or preauthorization adjudication.

                  ShortResult of the adjudication
                  Comments

                  The element is used to indicate the current state of the adjudication overall for the claim resource, for example: the request has been held (pended) for adjudication processing, for manual review or other reasons; that it has been processed and will be paid, or the outstanding paid, as submitted (approved); that no amount will be paid (denied); or that some amount between zero and the submitted amount will be paid (partial).

                  Control0..1
                  BindingFor example codes, see ClaimAdjudicationDecisionsCodes
                  (example to http://hl7.org/fhir/ValueSet/claim-decision)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  To advise the requestor of the result of the adjudication process.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  104. ClaimResponse.item.reviewOutcome.reason
                  Definition

                  The reasons for the result of the claim, predetermination, or preauthorization adjudication.

                  ShortReason for result of the adjudication
                  Control0..*
                  BindingFor example codes, see ClaimAdjudicationDecisionReasonCodes
                  (example to http://hl7.org/fhir/ValueSet/claim-decision-reason)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  To advise the requestor of the contributors to the result of the adjudication process.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  106. ClaimResponse.item.reviewOutcome.preAuthRef
                  Definition

                  Reference from the Insurer which is used in later communications which refers to this adjudication.

                  ShortPreauthorization reference
                  Comments

                  This value is only present on preauthorization adjudications.

                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  On subsequent claims, the insurer may require the provider to quote this value.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  108. ClaimResponse.item.reviewOutcome.preAuthPeriod
                  Definition

                  The time frame during which this authorization is effective.

                  ShortPreauthorization reference effective period
                  Control0..1
                  TypePeriod
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  To convey to the provider when the authorized products and services must be supplied for the authorized adjudication to apply.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  110. ClaimResponse.item.adjudication
                  Definition

                  If this item is a group then the values here are a summary of the adjudication of the detail items. If this item is a simple product or service then this is the result of the adjudication of this item.

                  ShortAdjudication details
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  The adjudication results conveys the insurer's assessment of the item provided in the claim under the terms of the patient's insurance coverage.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  112. ClaimResponse.item.adjudication.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  114. ClaimResponse.item.adjudication.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  116. ClaimResponse.item.adjudication.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  118. ClaimResponse.item.adjudication.category
                  Definition

                  A code to indicate the information type of this adjudication record. Information types may include the value submitted, maximum values or percentages allowed or payable under the plan, amounts that: the patient is responsible for in aggregate or pertaining to this item; amounts paid by other coverages; and, the benefit payable for this item.

                  ShortType of adjudication information
                  Comments

                  For example codes indicating: Co-Pay, deductible, eligible, benefit, tax, etc.

                  Control1..1
                  BindingFor example codes, see AdjudicationValueCodes
                  (example to http://hl7.org/fhir/ValueSet/adjudication)

                  The adjudication codes.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Needed to enable understanding of the context of the other information in the adjudication.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  120. ClaimResponse.item.adjudication.reason
                  Definition

                  A code supporting the understanding of the adjudication result and explaining variance from expected amount.

                  ShortExplanation of adjudication outcome
                  Comments

                  For example may indicate that the funds for this benefit type have been exhausted.

                  Control0..1
                  BindingFor example codes, see AdjudicationReasonCodes
                  (example to http://hl7.org/fhir/ValueSet/adjudication-reason)

                  The adjudication reason codes.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  To support understanding of variance from adjudication expectations.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  122. ClaimResponse.item.adjudication.amount
                  Definition

                  Monetary amount associated with the category.

                  ShortMonetary amount
                  Comments

                  For example: amount submitted, eligible amount, co-payment, and benefit payable.

                  Control0..1
                  TypeMoney
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Most adjudication categories convey a monetary amount.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  124. ClaimResponse.item.adjudication.quantity
                  Definition

                  A non-monetary value associated with the category. Mutually exclusive to the amount element above.

                  ShortNon-monetary value
                  Comments

                  For example: eligible percentage or co-payment percentage.

                  Control0..1
                  TypeQuantity
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Some adjudication categories convey a percentage or a fixed value.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  126. ClaimResponse.item.detail
                  Definition

                  A claim detail. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

                  ShortAdjudication for claim details
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  The adjudication for details provided on the claim.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  128. ClaimResponse.item.detail.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  130. ClaimResponse.item.detail.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  132. ClaimResponse.item.detail.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  134. ClaimResponse.item.detail.detailSequence
                  Definition

                  A number to uniquely reference the claim detail entry.

                  ShortClaim detail instance identifier
                  Control1..1
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Necessary to provide a mechanism to link the adjudication result to the submitted claim detail.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  136. ClaimResponse.item.detail.traceNumber
                  Definition

                  Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                  ShortNumber for tracking
                  Control0..*
                  TypeIdentifier
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Allows partners to uniquely identify components for tracking.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  138. ClaimResponse.item.detail.noteNumber
                  Definition

                  The numbers associated with notes below which apply to the adjudication of this item.

                  ShortApplicable note numbers
                  Control0..*
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  140. ClaimResponse.item.detail.reviewOutcome
                  Definition

                  The high-level results of the adjudication if adjudication has been performed.

                  ShortDetail level adjudication results
                  Control0..1
                  TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  142. ClaimResponse.item.detail.adjudication
                  Definition

                  The adjudication results.

                  ShortDetail level adjudication details
                  Control0..*
                  TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  144. ClaimResponse.item.detail.subDetail
                  Definition

                  A sub-detail adjudication of a simple product or service.

                  ShortAdjudication for claim sub-details
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  The adjudication for sub-details provided on the claim.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  146. ClaimResponse.item.detail.subDetail.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  148. ClaimResponse.item.detail.subDetail.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  150. ClaimResponse.item.detail.subDetail.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  152. ClaimResponse.item.detail.subDetail.subDetailSequence
                  Definition

                  A number to uniquely reference the claim sub-detail entry.

                  ShortClaim sub-detail instance identifier
                  Control1..1
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Necessary to provide a mechanism to link the adjudication result to the submitted claim sub-detail.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  154. ClaimResponse.item.detail.subDetail.traceNumber
                  Definition

                  Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                  ShortNumber for tracking
                  Control0..*
                  TypeIdentifier
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Allows partners to uniquely identify components for tracking.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  156. ClaimResponse.item.detail.subDetail.noteNumber
                  Definition

                  The numbers associated with notes below which apply to the adjudication of this item.

                  ShortApplicable note numbers
                  Control0..*
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  158. ClaimResponse.item.detail.subDetail.reviewOutcome
                  Definition

                  The high-level results of the adjudication if adjudication has been performed.

                  ShortSubdetail level adjudication results
                  Control0..1
                  TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  160. ClaimResponse.item.detail.subDetail.adjudication
                  Definition

                  The adjudication results.

                  ShortSubdetail level adjudication details
                  Control0..*
                  TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  162. ClaimResponse.addItem
                  Definition

                  The first-tier service adjudications for payor added product or service lines.

                  ShortInsurer added line items
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supportfalse
                  Summaryfalse
                  Requirements

                  Insurers may redefine the provided product or service or may package and/or decompose groups of products and services. The addItems allows the insurer to provide their line item list with linkage to the submitted items/details/sub-details. In a preauthorization the insurer may use the addItem structure to provide additional information on authorized products and services.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on ClaimResponse.addItem. The slices areOrdered and Open, and can be differentiated using the following discriminators:
                  • value @ extension('https://elga.moped.at/StructureDefinition/moped-ext-AddItemCategory').value.coding
                  • 164. ClaimResponse.addItem.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    166. ClaimResponse.addItem.extension
                    Definition

                    An Extension

                    ShortExtension
                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on ClaimResponse.addItem.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 168. ClaimResponse.addItem.extension:AddItemCategory
                      Slice NameAddItemCategory
                      Definition

                      Benefit classification

                      ShortAddItemCategory
                      Control0..1
                      TypeExtension(AddItemCategory) (Extension Type: CodeableConcept)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      170. ClaimResponse.addItem.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      172. ClaimResponse.addItem.itemSequence
                      Definition

                      Claim items which this service line is intended to replace.

                      ShortItem sequence number
                      Control0..*
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides references to the claim items.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      174. ClaimResponse.addItem.detailSequence
                      Definition

                      The sequence number of the details within the claim item which this line is intended to replace.

                      ShortDetail sequence number
                      Control0..*
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides references to the claim details within the claim item.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      176. ClaimResponse.addItem.subdetailSequence
                      Definition

                      The sequence number of the sub-details within the details within the claim item which this line is intended to replace.

                      ShortSubdetail sequence number
                      Control0..*
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides references to the claim sub-details within the claim detail.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      178. ClaimResponse.addItem.traceNumber
                      Definition

                      Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                      ShortNumber for tracking
                      Control0..*
                      TypeIdentifier
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Allows partners to uniquely identify components for tracking.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      180. ClaimResponse.addItem.provider
                      Definition

                      The providers who are authorized for the services rendered to the patient.

                      ShortAuthorized providers
                      Control0..*
                      TypeReference(Practitioner, PractitionerRole, Organization)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Insurer may provide authorization specifically to a restricted set of providers rather than an open authorization.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      182. ClaimResponse.addItem.revenue
                      Definition

                      The type of revenue or cost center providing the product and/or service.

                      ShortRevenue or cost center code
                      Control0..1
                      BindingFor example codes, see ExampleRevenueCenterCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

                      Codes for the revenue or cost centers supplying the service and/or products.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed in the processing of institutional claims.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      184. ClaimResponse.addItem.productOrService
                      Definition

                      When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                      ShortBilling, service, product, or drug code
                      Comments

                      If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)

                      Allowable service and product codes.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to state what was provided or done.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      186. ClaimResponse.addItem.productOrServiceEnd
                      Definition

                      This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                      ShortEnd of a range of codes
                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)
                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      188. ClaimResponse.addItem.request
                      Definition

                      Request or Referral for Goods or Service to be rendered.

                      ShortRequest or Referral for Service
                      Control0..*
                      TypeReference(DeviceRequest, MedicationRequest, NutritionOrder, ServiceRequest, SupplyRequest, VisionPrescription)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      May identify the service to be provided or provider authorization for the service.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      190. ClaimResponse.addItem.modifier
                      Definition

                      Item typification or modifiers codes to convey additional context for the product or service.

                      ShortService/Product billing modifiers
                      Comments

                      For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

                      Control0..*
                      BindingFor example codes, see ModifierTypeCodes
                      (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

                      Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      To support inclusion of the item for adjudication or to charge an elevated fee.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      192. ClaimResponse.addItem.programCode
                      Definition

                      Identifies the program under which this may be recovered.

                      ShortProgram the product or service is provided under
                      Comments

                      For example: Neonatal program, child dental program or drug users recovery program.

                      Control0..*
                      BindingFor example codes, see ExampleProgramReasonCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-program-code)

                      Program specific reason codes.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      194. ClaimResponse.addItem.serviced[x]
                      Definition

                      The date or dates when the service or product was supplied, performed or completed.

                      ShortDate or dates of service or product delivery
                      Control0..1
                      TypeChoice of: date, Period
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed to determine whether the service or product was provided during the term of the insurance coverage.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      196. ClaimResponse.addItem.location[x]
                      Definition

                      Where the product or service was provided.

                      ShortPlace of service or where product was supplied
                      Control0..1
                      BindingFor example codes, see ExampleServicePlaceCodes
                      (example to http://hl7.org/fhir/ValueSet/service-place)

                      Place of service: pharmacy, school, prison, etc.

                      TypeChoice of: CodeableConcept, Address, Reference(Location)
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The location can alter whether the item was acceptable for insurance purposes or impact the determination of the benefit amount.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      198. ClaimResponse.addItem.quantity
                      Definition

                      The number of repetitions of a service or product.

                      ShortCount of products or services
                      Control0..1
                      TypeQuantity(SimpleQuantity)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when the product or service code does not convey the quantity provided.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      200. ClaimResponse.addItem.unitPrice
                      Definition

                      If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                      ShortFee, charge or cost per item
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The amount charged to the patient by the provider for a single unit.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      202. ClaimResponse.addItem.factor
                      Definition

                      A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                      ShortPrice scaling factor
                      Comments

                      To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                      Control0..1
                      Typedecimal
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      204. ClaimResponse.addItem.tax
                      Definition

                      The total of taxes applicable for this product or service.

                      ShortTotal tax
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when taxes are not embedded in the unit price or provided as a separate service.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      206. ClaimResponse.addItem.net
                      Definition

                      The total amount claimed for the group (if a grouper) or the addItem. Net = unit price * quantity * factor.

                      ShortTotal item cost
                      Comments

                      For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides the total amount claimed for the group (if a grouper) or the line item.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      208. ClaimResponse.addItem.bodySite
                      Definition

                      Physical location where the service is performed or applies.

                      ShortAnatomical location
                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      210. ClaimResponse.addItem.bodySite.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      212. ClaimResponse.addItem.bodySite.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      214. ClaimResponse.addItem.bodySite.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      216. ClaimResponse.addItem.bodySite.site
                      Definition

                      Physical service site on the patient (limb, tooth, etc.).

                      ShortLocation
                      Comments

                      For example: Providing a tooth code allows an insurer to identify a provider performing a filling on a tooth that was previously removed.

                      Control1..*
                      BindingFor example codes, see OralSiteCodes
                      (example to http://hl7.org/fhir/ValueSet/tooth)
                      TypeCodeableReference(BodyStructure)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Allows insurer to validate specific procedures.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      218. ClaimResponse.addItem.bodySite.subSite
                      Definition

                      A region or surface of the bodySite, e.g. limb region or tooth surface(s).

                      ShortSub-location
                      Control0..*
                      BindingFor example codes, see SurfaceCodes
                      (example to http://hl7.org/fhir/ValueSet/surface)
                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Allows insurer to validate specific procedures.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      220. ClaimResponse.addItem.noteNumber
                      Definition

                      The numbers associated with notes below which apply to the adjudication of this item.

                      ShortApplicable note numbers
                      Control0..*
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      222. ClaimResponse.addItem.reviewOutcome
                      Definition

                      The high-level results of the adjudication if adjudication has been performed.

                      ShortAdded items adjudication results
                      Control0..1
                      TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      224. ClaimResponse.addItem.adjudication
                      Definition

                      The adjudication results.

                      ShortAdded items adjudication
                      Control0..*
                      TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      226. ClaimResponse.addItem.detail
                      Definition

                      The second-tier service adjudications for payor added services.

                      ShortInsurer added line details
                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      228. ClaimResponse.addItem.detail.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      230. ClaimResponse.addItem.detail.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      232. ClaimResponse.addItem.detail.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      234. ClaimResponse.addItem.detail.traceNumber
                      Definition

                      Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                      ShortNumber for tracking
                      Control0..*
                      TypeIdentifier
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Allows partners to uniquely identify components for tracking.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      236. ClaimResponse.addItem.detail.revenue
                      Definition

                      The type of revenue or cost center providing the product and/or service.

                      ShortRevenue or cost center code
                      Control0..1
                      BindingFor example codes, see ExampleRevenueCenterCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

                      Codes for the revenue or cost centers supplying the service and/or products.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed in the processing of institutional claims.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      238. ClaimResponse.addItem.detail.productOrService
                      Definition

                      When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                      ShortBilling, service, product, or drug code
                      Comments

                      If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)

                      Allowable service and product codes.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to state what was provided or done.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      240. ClaimResponse.addItem.detail.productOrServiceEnd
                      Definition

                      This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                      ShortEnd of a range of codes
                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)
                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      242. ClaimResponse.addItem.detail.modifier
                      Definition

                      Item typification or modifiers codes to convey additional context for the product or service.

                      ShortService/Product billing modifiers
                      Comments

                      For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

                      Control0..*
                      BindingFor example codes, see ModifierTypeCodes
                      (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

                      Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      To support inclusion of the item for adjudication or to charge an elevated fee.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      244. ClaimResponse.addItem.detail.quantity
                      Definition

                      The number of repetitions of a service or product.

                      ShortCount of products or services
                      Control0..1
                      TypeQuantity(SimpleQuantity)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when the product or service code does not convey the quantity provided.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      246. ClaimResponse.addItem.detail.unitPrice
                      Definition

                      If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                      ShortFee, charge or cost per item
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The amount charged to the patient by the provider for a single unit.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      248. ClaimResponse.addItem.detail.factor
                      Definition

                      A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                      ShortPrice scaling factor
                      Comments

                      To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                      Control0..1
                      Typedecimal
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      250. ClaimResponse.addItem.detail.tax
                      Definition

                      The total of taxes applicable for this product or service.

                      ShortTotal tax
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when taxes are not embedded in the unit price or provided as a separate service.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      252. ClaimResponse.addItem.detail.net
                      Definition

                      The total amount claimed for the group (if a grouper) or the addItem.detail. Net = unit price * quantity * factor.

                      ShortTotal item cost
                      Comments

                      For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides the total amount claimed for the group (if a grouper) or the line item.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      254. ClaimResponse.addItem.detail.noteNumber
                      Definition

                      The numbers associated with notes below which apply to the adjudication of this item.

                      ShortApplicable note numbers
                      Control0..*
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      256. ClaimResponse.addItem.detail.reviewOutcome
                      Definition

                      The high-level results of the adjudication if adjudication has been performed.

                      ShortAdded items detail level adjudication results
                      Control0..1
                      TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      258. ClaimResponse.addItem.detail.adjudication
                      Definition

                      The adjudication results.

                      ShortAdded items detail adjudication
                      Control0..*
                      TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      260. ClaimResponse.addItem.detail.subDetail
                      Definition

                      The third-tier service adjudications for payor added services.

                      ShortInsurer added line items
                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      262. ClaimResponse.addItem.detail.subDetail.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      264. ClaimResponse.addItem.detail.subDetail.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      266. ClaimResponse.addItem.detail.subDetail.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      268. ClaimResponse.addItem.detail.subDetail.traceNumber
                      Definition

                      Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                      ShortNumber for tracking
                      Control0..*
                      TypeIdentifier
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Allows partners to uniquely identify components for tracking.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      270. ClaimResponse.addItem.detail.subDetail.revenue
                      Definition

                      The type of revenue or cost center providing the product and/or service.

                      ShortRevenue or cost center code
                      Control0..1
                      BindingFor example codes, see ExampleRevenueCenterCodes
                      (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

                      Codes for the revenue or cost centers supplying the service and/or products.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Needed in the processing of institutional claims.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      272. ClaimResponse.addItem.detail.subDetail.productOrService
                      Definition

                      When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                      ShortBilling, service, product, or drug code
                      Comments

                      If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)

                      Allowable service and product codes.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Necessary to state what was provided or done.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      274. ClaimResponse.addItem.detail.subDetail.productOrServiceEnd
                      Definition

                      This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                      ShortEnd of a range of codes
                      Control0..1
                      BindingFor example codes, see USCLSCodes
                      (example to http://hl7.org/fhir/ValueSet/service-uscls)
                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      276. ClaimResponse.addItem.detail.subDetail.modifier
                      Definition

                      Item typification or modifiers codes to convey additional context for the product or service.

                      ShortService/Product billing modifiers
                      Comments

                      For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

                      Control0..*
                      BindingFor example codes, see ModifierTypeCodes
                      (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

                      Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      To support inclusion of the item for adjudication or to charge an elevated fee.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      278. ClaimResponse.addItem.detail.subDetail.quantity
                      Definition

                      The number of repetitions of a service or product.

                      ShortCount of products or services
                      Control0..1
                      TypeQuantity(SimpleQuantity)
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when the product or service code does not convey the quantity provided.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      280. ClaimResponse.addItem.detail.subDetail.unitPrice
                      Definition

                      If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                      ShortFee, charge or cost per item
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      The amount charged to the patient by the provider for a single unit.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      282. ClaimResponse.addItem.detail.subDetail.factor
                      Definition

                      A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                      ShortPrice scaling factor
                      Comments

                      To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                      Control0..1
                      Typedecimal
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      284. ClaimResponse.addItem.detail.subDetail.tax
                      Definition

                      The total of taxes applicable for this product or service.

                      ShortTotal tax
                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Required when taxes are not embedded in the unit price or provided as a separate service.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      286. ClaimResponse.addItem.detail.subDetail.net
                      Definition

                      The total amount claimed for the addItem.detail.subDetail. Net = unit price * quantity * factor.

                      ShortTotal item cost
                      Comments

                      For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                      Control0..1
                      TypeMoney
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides the total amount claimed for the group (if a grouper) or the line item.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      288. ClaimResponse.addItem.detail.subDetail.noteNumber
                      Definition

                      The numbers associated with notes below which apply to the adjudication of this item.

                      ShortApplicable note numbers
                      Control0..*
                      TypepositiveInt
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      290. ClaimResponse.addItem.detail.subDetail.reviewOutcome
                      Definition

                      The high-level results of the adjudication if adjudication has been performed.

                      ShortAdded items subdetail level adjudication results
                      Control0..1
                      TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      292. ClaimResponse.addItem.detail.subDetail.adjudication
                      Definition

                      The adjudication results.

                      ShortAdded items subdetail adjudication
                      Control0..*
                      TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      294. ClaimResponse.addItem:Patientenanteil
                      Slice NamePatientenanteil
                      Definition

                      The first-tier service adjudications for payor added product or service lines.

                      ShortInsurer added line items
                      Control0..1
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supportfalse
                      Summaryfalse
                      Requirements

                      Insurers may redefine the provided product or service or may package and/or decompose groups of products and services. The addItems allows the insurer to provide their line item list with linkage to the submitted items/details/sub-details. In a preauthorization the insurer may use the addItem structure to provide additional information on authorized products and services.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      296. ClaimResponse.addItem:Patientenanteil.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      298. ClaimResponse.addItem:Patientenanteil.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on ClaimResponse.addItem.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 300. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory
                        Slice NameAddItemCategory
                        Definition

                        Benefit classification

                        ShortAddItemCategory
                        Control0..1
                        TypeExtension(AddItemCategory) (Extension Type: CodeableConcept)
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        302. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typeid
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        304. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.extension
                        Definition

                        An Extension

                        ShortExtension
                        Control0..0
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on ClaimResponse.addItem.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 306. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.url
                          Definition

                          Source of the definition for the extension code - a logical name or a URL.

                          Shortidentifies the meaning of the extension
                          Comments

                          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                          Control1..1
                          Typeuri
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          Fixed Valuehttps://elga.moped.at/StructureDefinition/moped-ext-AddItemCategory
                          308. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.value[x]
                          Definition

                          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                          ShortValue of extension
                          Control0..1
                          This element is affected by the following invariants: ext-1
                          BindingThe codes SHALL be taken from Moped Claim Item Category ValueSet
                          (required to https://elga.moped.at/ValueSet/MopedClaimItemCategoryVS)
                          TypeCodeableConcept
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          310. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.value[x].id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          This element is affected by the following invariants: ele-1
                          Typeid
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          312. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.value[x].extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on ClaimResponse.addItem.extension.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 314. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.value[x].coding
                            Definition

                            A reference to a code defined by a terminology system.

                            ShortCode defined by a terminology system
                            Comments

                            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                            Control0..*
                            TypeCoding
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            Allows for alternative encodings within a code system, and translations to other code systems.

                            Pattern Value{
                              "system" : "https://elga.moped.at/CodeSystem/MopedClaimItemCategoryCS",
                              "code" : "Patientenanteil"
                            }
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            316. ClaimResponse.addItem:Patientenanteil.extension:AddItemCategory.value[x].text
                            Definition

                            A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                            ShortPlain text representation of the concept
                            Comments

                            Very often the text is the same as a displayName of one of the codings.

                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            318. ClaimResponse.addItem:Patientenanteil.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            320. ClaimResponse.addItem:Patientenanteil.itemSequence
                            Definition

                            Claim items which this service line is intended to replace.

                            ShortItem sequence number
                            Control0..*
                            TypepositiveInt
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides references to the claim items.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            322. ClaimResponse.addItem:Patientenanteil.detailSequence
                            Definition

                            The sequence number of the details within the claim item which this line is intended to replace.

                            ShortDetail sequence number
                            Control0..*
                            TypepositiveInt
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides references to the claim details within the claim item.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            324. ClaimResponse.addItem:Patientenanteil.subdetailSequence
                            Definition

                            The sequence number of the sub-details within the details within the claim item which this line is intended to replace.

                            ShortSubdetail sequence number
                            Control0..*
                            TypepositiveInt
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides references to the claim sub-details within the claim detail.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            326. ClaimResponse.addItem:Patientenanteil.traceNumber
                            Definition

                            Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                            ShortNumber for tracking
                            Control0..*
                            TypeIdentifier
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Allows partners to uniquely identify components for tracking.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            328. ClaimResponse.addItem:Patientenanteil.provider
                            Definition

                            The providers who are authorized for the services rendered to the patient.

                            ShortAuthorized providers
                            Control0..*
                            TypeReference(Practitioner, PractitionerRole, Organization)
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Insurer may provide authorization specifically to a restricted set of providers rather than an open authorization.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            330. ClaimResponse.addItem:Patientenanteil.revenue
                            Definition

                            The type of revenue or cost center providing the product and/or service.

                            ShortRevenue or cost center code
                            Control0..1
                            BindingFor example codes, see ExampleRevenueCenterCodes
                            (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

                            Codes for the revenue or cost centers supplying the service and/or products.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Needed in the processing of institutional claims.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            332. ClaimResponse.addItem:Patientenanteil.productOrService
                            Definition

                            When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                            ShortBilling, service, product, or drug code
                            Comments

                            If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                            Control0..1
                            BindingFor example codes, see USCLSCodes
                            (example to http://hl7.org/fhir/ValueSet/service-uscls)

                            Allowable service and product codes.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Necessary to state what was provided or done.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            334. ClaimResponse.addItem:Patientenanteil.productOrServiceEnd
                            Definition

                            This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                            ShortEnd of a range of codes
                            Control0..1
                            BindingFor example codes, see USCLSCodes
                            (example to http://hl7.org/fhir/ValueSet/service-uscls)
                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            336. ClaimResponse.addItem:Patientenanteil.request
                            Definition

                            Request or Referral for Goods or Service to be rendered.

                            ShortRequest or Referral for Service
                            Control0..*
                            TypeReference(DeviceRequest, MedicationRequest, NutritionOrder, ServiceRequest, SupplyRequest, VisionPrescription)
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            May identify the service to be provided or provider authorization for the service.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            338. ClaimResponse.addItem:Patientenanteil.modifier
                            Definition

                            Item typification or modifiers codes to convey additional context for the product or service.

                            ShortService/Product billing modifiers
                            Comments

                            For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

                            Control0..*
                            BindingFor example codes, see ModifierTypeCodes
                            (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

                            Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            To support inclusion of the item for adjudication or to charge an elevated fee.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            340. ClaimResponse.addItem:Patientenanteil.programCode
                            Definition

                            Identifies the program under which this may be recovered.

                            ShortProgram the product or service is provided under
                            Comments

                            For example: Neonatal program, child dental program or drug users recovery program.

                            Control0..*
                            BindingFor example codes, see ExampleProgramReasonCodes
                            (example to http://hl7.org/fhir/ValueSet/ex-program-code)

                            Program specific reason codes.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            342. ClaimResponse.addItem:Patientenanteil.serviced[x]
                            Definition

                            The date or dates when the service or product was supplied, performed or completed.

                            ShortDate or dates of service or product delivery
                            Control0..1
                            TypeChoice of: date, Period
                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Needed to determine whether the service or product was provided during the term of the insurance coverage.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            344. ClaimResponse.addItem:Patientenanteil.location[x]
                            Definition

                            Where the product or service was provided.

                            ShortPlace of service or where product was supplied
                            Control0..1
                            BindingFor example codes, see ExampleServicePlaceCodes
                            (example to http://hl7.org/fhir/ValueSet/service-place)

                            Place of service: pharmacy, school, prison, etc.

                            TypeChoice of: CodeableConcept, Address, Reference(Location)
                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            The location can alter whether the item was acceptable for insurance purposes or impact the determination of the benefit amount.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            346. ClaimResponse.addItem:Patientenanteil.quantity
                            Definition

                            The number of repetitions of a service or product.

                            ShortCount of products or services
                            Control0..1
                            TypeQuantity(SimpleQuantity)
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Required when the product or service code does not convey the quantity provided.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            348. ClaimResponse.addItem:Patientenanteil.unitPrice
                            Definition

                            If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                            ShortPatientenanteil für Angehörige (tägl. Satz) netto
                            Control1..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            The amount charged to the patient by the provider for a single unit.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            350. ClaimResponse.addItem:Patientenanteil.factor
                            Definition

                            A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                            ShortPrice scaling factor
                            Comments

                            To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                            Control0..1
                            Typedecimal
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                            Pattern Value-1
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            352. ClaimResponse.addItem:Patientenanteil.tax
                            Definition

                            The total of taxes applicable for this product or service.

                            ShortTotal tax
                            Control0..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Required when taxes are not embedded in the unit price or provided as a separate service.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            354. ClaimResponse.addItem:Patientenanteil.net
                            Definition

                            The total amount claimed for the group (if a grouper) or the addItem. Net = unit price * quantity * factor.

                            ShortPatientenanteil netto
                            Comments

                            For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                            Control1..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides the total amount claimed for the group (if a grouper) or the line item.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            356. ClaimResponse.addItem:Patientenanteil.bodySite
                            Definition

                            Physical location where the service is performed or applies.

                            ShortAnatomical location
                            Control0..*
                            TypeBackboneElement
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            358. ClaimResponse.addItem:Patientenanteil.bodySite.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            360. ClaimResponse.addItem:Patientenanteil.bodySite.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            362. ClaimResponse.addItem:Patientenanteil.bodySite.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            364. ClaimResponse.addItem:Patientenanteil.bodySite.site
                            Definition

                            Physical service site on the patient (limb, tooth, etc.).

                            ShortLocation
                            Comments

                            For example: Providing a tooth code allows an insurer to identify a provider performing a filling on a tooth that was previously removed.

                            Control1..*
                            BindingFor example codes, see OralSiteCodes
                            (example to http://hl7.org/fhir/ValueSet/tooth)
                            TypeCodeableReference(BodyStructure)
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Allows insurer to validate specific procedures.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            366. ClaimResponse.addItem:Patientenanteil.bodySite.subSite
                            Definition

                            A region or surface of the bodySite, e.g. limb region or tooth surface(s).

                            ShortSub-location
                            Control0..*
                            BindingFor example codes, see SurfaceCodes
                            (example to http://hl7.org/fhir/ValueSet/surface)
                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Allows insurer to validate specific procedures.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            368. ClaimResponse.addItem:Patientenanteil.noteNumber
                            Definition

                            The numbers associated with notes below which apply to the adjudication of this item.

                            ShortApplicable note numbers
                            Control0..*
                            TypepositiveInt
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            370. ClaimResponse.addItem:Patientenanteil.reviewOutcome
                            Definition

                            The high-level results of the adjudication if adjudication has been performed.

                            ShortAdded items adjudication results
                            Control0..1
                            TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            372. ClaimResponse.addItem:Patientenanteil.adjudication
                            Definition

                            The adjudication results.

                            ShortAdded items adjudication
                            Control0..*
                            TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            374. ClaimResponse.addItem:Patientenanteil.detail
                            Definition

                            The second-tier service adjudications for payor added services.

                            ShortInsurer added line details
                            Control0..*
                            TypeBackboneElement
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            376. ClaimResponse.addItem:Patientenanteil.detail.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            378. ClaimResponse.addItem:Patientenanteil.detail.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            380. ClaimResponse.addItem:Patientenanteil.detail.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            382. ClaimResponse.addItem:Patientenanteil.detail.traceNumber
                            Definition

                            Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                            ShortNumber for tracking
                            Control0..*
                            TypeIdentifier
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Allows partners to uniquely identify components for tracking.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            384. ClaimResponse.addItem:Patientenanteil.detail.revenue
                            Definition

                            The type of revenue or cost center providing the product and/or service.

                            ShortRevenue or cost center code
                            Control0..1
                            BindingFor example codes, see ExampleRevenueCenterCodes
                            (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

                            Codes for the revenue or cost centers supplying the service and/or products.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Needed in the processing of institutional claims.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            386. ClaimResponse.addItem:Patientenanteil.detail.productOrService
                            Definition

                            When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                            ShortBilling, service, product, or drug code
                            Comments

                            If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                            Control0..1
                            BindingFor example codes, see USCLSCodes
                            (example to http://hl7.org/fhir/ValueSet/service-uscls)

                            Allowable service and product codes.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Necessary to state what was provided or done.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            388. ClaimResponse.addItem:Patientenanteil.detail.productOrServiceEnd
                            Definition

                            This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                            ShortEnd of a range of codes
                            Control0..1
                            BindingFor example codes, see USCLSCodes
                            (example to http://hl7.org/fhir/ValueSet/service-uscls)
                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            390. ClaimResponse.addItem:Patientenanteil.detail.modifier
                            Definition

                            Item typification or modifiers codes to convey additional context for the product or service.

                            ShortService/Product billing modifiers
                            Comments

                            For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

                            Control0..*
                            BindingFor example codes, see ModifierTypeCodes
                            (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

                            Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            To support inclusion of the item for adjudication or to charge an elevated fee.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            392. ClaimResponse.addItem:Patientenanteil.detail.quantity
                            Definition

                            The number of repetitions of a service or product.

                            ShortCount of products or services
                            Control0..1
                            TypeQuantity(SimpleQuantity)
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Required when the product or service code does not convey the quantity provided.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            394. ClaimResponse.addItem:Patientenanteil.detail.unitPrice
                            Definition

                            If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                            ShortFee, charge or cost per item
                            Control0..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            The amount charged to the patient by the provider for a single unit.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            396. ClaimResponse.addItem:Patientenanteil.detail.factor
                            Definition

                            A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                            ShortPrice scaling factor
                            Comments

                            To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                            Control0..1
                            Typedecimal
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            398. ClaimResponse.addItem:Patientenanteil.detail.tax
                            Definition

                            The total of taxes applicable for this product or service.

                            ShortTotal tax
                            Control0..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Required when taxes are not embedded in the unit price or provided as a separate service.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            400. ClaimResponse.addItem:Patientenanteil.detail.net
                            Definition

                            The total amount claimed for the group (if a grouper) or the addItem.detail. Net = unit price * quantity * factor.

                            ShortTotal item cost
                            Comments

                            For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                            Control0..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides the total amount claimed for the group (if a grouper) or the line item.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            402. ClaimResponse.addItem:Patientenanteil.detail.noteNumber
                            Definition

                            The numbers associated with notes below which apply to the adjudication of this item.

                            ShortApplicable note numbers
                            Control0..*
                            TypepositiveInt
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            404. ClaimResponse.addItem:Patientenanteil.detail.reviewOutcome
                            Definition

                            The high-level results of the adjudication if adjudication has been performed.

                            ShortAdded items detail level adjudication results
                            Control0..1
                            TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            406. ClaimResponse.addItem:Patientenanteil.detail.adjudication
                            Definition

                            The adjudication results.

                            ShortAdded items detail adjudication
                            Control0..*
                            TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            408. ClaimResponse.addItem:Patientenanteil.detail.subDetail
                            Definition

                            The third-tier service adjudications for payor added services.

                            ShortInsurer added line items
                            Control0..*
                            TypeBackboneElement
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            410. ClaimResponse.addItem:Patientenanteil.detail.subDetail.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            412. ClaimResponse.addItem:Patientenanteil.detail.subDetail.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            414. ClaimResponse.addItem:Patientenanteil.detail.subDetail.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            416. ClaimResponse.addItem:Patientenanteil.detail.subDetail.traceNumber
                            Definition

                            Trace number for tracking purposes. May be defined at the jurisdiction level or between trading partners.

                            ShortNumber for tracking
                            Control0..*
                            TypeIdentifier
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Allows partners to uniquely identify components for tracking.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            418. ClaimResponse.addItem:Patientenanteil.detail.subDetail.revenue
                            Definition

                            The type of revenue or cost center providing the product and/or service.

                            ShortRevenue or cost center code
                            Control0..1
                            BindingFor example codes, see ExampleRevenueCenterCodes
                            (example to http://hl7.org/fhir/ValueSet/ex-revenue-center)

                            Codes for the revenue or cost centers supplying the service and/or products.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Needed in the processing of institutional claims.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            420. ClaimResponse.addItem:Patientenanteil.detail.subDetail.productOrService
                            Definition

                            When the value is a group code then this item collects a set of related item details, otherwise this contains the product, service, drug or other billing code for the item. This element may be the start of a range of .productOrService codes used in conjunction with .productOrServiceEnd or it may be a solo element where .productOrServiceEnd is not used.

                            ShortBilling, service, product, or drug code
                            Comments

                            If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

                            Control0..1
                            BindingFor example codes, see USCLSCodes
                            (example to http://hl7.org/fhir/ValueSet/service-uscls)

                            Allowable service and product codes.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Necessary to state what was provided or done.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            422. ClaimResponse.addItem:Patientenanteil.detail.subDetail.productOrServiceEnd
                            Definition

                            This contains the end of a range of product, service, drug or other billing codes for the item. This element is not used when the .productOrService is a group code. This value may only be present when a .productOfService code has been provided to convey the start of the range. Typically this value may be used only with preauthorizations and not with claims.

                            ShortEnd of a range of codes
                            Control0..1
                            BindingFor example codes, see USCLSCodes
                            (example to http://hl7.org/fhir/ValueSet/service-uscls)
                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Alternate NamesEnd of a range of Drug Code; Bill Code; Service Cod
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            424. ClaimResponse.addItem:Patientenanteil.detail.subDetail.modifier
                            Definition

                            Item typification or modifiers codes to convey additional context for the product or service.

                            ShortService/Product billing modifiers
                            Comments

                            For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

                            Control0..*
                            BindingFor example codes, see ModifierTypeCodes
                            (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

                            Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            To support inclusion of the item for adjudication or to charge an elevated fee.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            426. ClaimResponse.addItem:Patientenanteil.detail.subDetail.quantity
                            Definition

                            The number of repetitions of a service or product.

                            ShortCount of products or services
                            Control0..1
                            TypeQuantity(SimpleQuantity)
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Required when the product or service code does not convey the quantity provided.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            428. ClaimResponse.addItem:Patientenanteil.detail.subDetail.unitPrice
                            Definition

                            If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

                            ShortFee, charge or cost per item
                            Control0..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            The amount charged to the patient by the provider for a single unit.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            430. ClaimResponse.addItem:Patientenanteil.detail.subDetail.factor
                            Definition

                            A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

                            ShortPrice scaling factor
                            Comments

                            To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

                            Control0..1
                            Typedecimal
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            432. ClaimResponse.addItem:Patientenanteil.detail.subDetail.tax
                            Definition

                            The total of taxes applicable for this product or service.

                            ShortTotal tax
                            Control0..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Required when taxes are not embedded in the unit price or provided as a separate service.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            434. ClaimResponse.addItem:Patientenanteil.detail.subDetail.net
                            Definition

                            The total amount claimed for the addItem.detail.subDetail. Net = unit price * quantity * factor.

                            ShortTotal item cost
                            Comments

                            For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

                            Control0..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides the total amount claimed for the group (if a grouper) or the line item.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            436. ClaimResponse.addItem:Patientenanteil.detail.subDetail.noteNumber
                            Definition

                            The numbers associated with notes below which apply to the adjudication of this item.

                            ShortApplicable note numbers
                            Control0..*
                            TypepositiveInt
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides a condensed manner for associating human readable descriptive explanations for adjudications on the line item.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            438. ClaimResponse.addItem:Patientenanteil.detail.subDetail.reviewOutcome
                            Definition

                            The high-level results of the adjudication if adjudication has been performed.

                            ShortAdded items subdetail level adjudication results
                            Control0..1
                            TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.reviewOutcome
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            440. ClaimResponse.addItem:Patientenanteil.detail.subDetail.adjudication
                            Definition

                            The adjudication results.

                            ShortAdded items subdetail adjudication
                            Control0..*
                            TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            442. ClaimResponse.adjudication
                            Definition

                            The adjudication results which are presented at the header level rather than at the line-item or add-item levels.

                            ShortHeader-level adjudication
                            Control0..*
                            TypeSeettp://hl7.org/fhir/StructureDefinition/ClaimResponse#ClaimResponse.item.adjudication
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Some insurers will receive line-items but provide the adjudication only at a summary or header-level.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            444. ClaimResponse.total
                            Definition

                            Categorized monetary totals for the adjudication.

                            ShortForderungsbetrag für Ausländerverrechnung/Regresse
                            Comments

                            Totals for amounts submitted, co-pays, benefits payable etc.

                            Control0..*
                            TypeBackboneElement
                            Is Modifierfalse
                            Must Supportfalse
                            Summarytrue
                            Requirements

                            To provide the requestor with financial totals by category for the adjudication.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            446. ClaimResponse.total.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            448. ClaimResponse.total.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            450. ClaimResponse.total.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            452. ClaimResponse.total.category
                            Definition

                            A code to indicate the information type of this adjudication record. Information types may include: the value submitted, maximum values or percentages allowed or payable under the plan, amounts that the patient is responsible for in aggregate or pertaining to this item, amounts paid by other coverages, and the benefit payable for this item.

                            ShortType of adjudication information
                            Comments

                            For example codes indicating: Co-Pay, deductible, eligible, benefit, tax, etc.

                            Control1..1
                            BindingFor example codes, see AdjudicationValueCodes
                            (example to http://hl7.org/fhir/ValueSet/adjudication)

                            The adjudication codes.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summarytrue
                            Requirements

                            Needed to convey the type of total provided.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            454. ClaimResponse.total.amount
                            Definition

                            Monetary total amount associated with the category.

                            ShortFinancial total for the category
                            Control1..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summarytrue
                            Requirements

                            Needed to convey the total monetary amount.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            456. ClaimResponse.payment
                            Definition

                            Payment details for the adjudication of the claim.

                            ShortPayment Details
                            Control0..1
                            TypeBackboneElement
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Needed to convey references to the financial instrument that has been used if payment has been made.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            458. ClaimResponse.payment.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            460. ClaimResponse.payment.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            462. ClaimResponse.payment.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            464. ClaimResponse.payment.type
                            Definition

                            Whether this represents partial or complete payment of the benefits payable.

                            ShortPartial or complete payment
                            Control1..1
                            BindingFor example codes, see ExamplePaymentTypeCodes
                            (example to http://hl7.org/fhir/ValueSet/ex-paymenttype)

                            The type (partial, complete) of the payment.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            To advise the requestor when the insurer believes all payments to have been completed.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            466. ClaimResponse.payment.adjustment
                            Definition

                            Total amount of all adjustments to this payment included in this transaction which are not related to this claim's adjudication.

                            ShortPayment adjustment for non-claim issues
                            Comments

                            Insurers will deduct amounts owing from the provider (adjustment), such as a prior overpayment, from the amount owing to the provider (benefits payable) when payment is made to the provider.

                            Control0..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            To advise the requestor of adjustments applied to the payment.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            468. ClaimResponse.payment.adjustmentReason
                            Definition

                            Reason for the payment adjustment.

                            ShortExplanation for the adjustment
                            Control0..1
                            BindingFor example codes, see PaymentAdjustmentReasonCodes
                            (example to http://hl7.org/fhir/ValueSet/payment-adjustment-reason)

                            Payment Adjustment reason codes.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Needed to clarify the monetary adjustment.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            470. ClaimResponse.payment.date
                            Definition

                            Estimated date the payment will be issued or the actual issue date of payment.

                            ShortExpected date of payment
                            Control0..1
                            Typedate
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            To advise the payee when payment can be expected.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            472. ClaimResponse.payment.amount
                            Definition

                            Benefits payable less any payment adjustment.

                            ShortPayable amount after adjustment
                            Control1..1
                            TypeMoney
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Needed to provide the actual payment amount.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            474. ClaimResponse.payment.identifier
                            Definition

                            Issuer's unique identifier for the payment instrument.

                            ShortBusiness identifier for the payment
                            Comments

                            For example: EFT number or check number.

                            NoteThis is a business identifier, not a resource identifier (see discussion)
                            Control0..1
                            TypeIdentifier
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Enable the receiver to reconcile when payment received.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            476. ClaimResponse.fundsReserve
                            Definition

                            A code, used only on a response to a preauthorization, to indicate whether the benefits payable have been reserved and for whom.

                            ShortFunds reserved status
                            Comments

                            Fund would be release by a future claim quoting the preAuthRef of this response. Examples of values include: provider, patient, none.

                            Control0..1
                            BindingFor example codes, see FundsReservationCodes
                            (example to http://hl7.org/fhir/ValueSet/fundsreserve)

                            For whom funds are to be reserved: (Patient, Provider, None).

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Needed to advise the submitting provider on whether the rquest for reservation of funds has been honored.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            478. ClaimResponse.formCode
                            Definition

                            A code for the form to be used for printing the content.

                            ShortPrinted form identifier
                            Comments

                            May be needed to identify specific jurisdictional forms.

                            Control0..1
                            BindingFor example codes, see FormCodes
                            (example to http://hl7.org/fhir/ValueSet/forms)

                            The forms codes.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Needed to specify the specific form used for producing output for this response.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            480. ClaimResponse.form
                            Definition

                            The actual form, by reference or inclusion, for printing the content or an EOB.

                            ShortPrinted reference or actual form
                            Comments

                            Needed to permit insurers to include the actual form.

                            Control0..1
                            TypeAttachment
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Needed to include the specific form used for producing output for this response.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            482. ClaimResponse.processNote
                            Definition

                            A note that describes or explains adjudication results in a human readable form.

                            ShortNote concerning adjudication
                            Control0..*
                            TypeBackboneElement
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides the insurer specific textual explanations associated with the processing.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            484. ClaimResponse.processNote.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            486. ClaimResponse.processNote.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            488. ClaimResponse.processNote.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            490. ClaimResponse.processNote.number
                            Definition

                            A number to uniquely identify a note entry.

                            ShortNote instance identifier
                            Control0..1
                            TypepositiveInt
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Necessary to provide a mechanism to link from adjudications.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            492. ClaimResponse.processNote.type
                            Definition

                            The business purpose of the note text.

                            ShortNote purpose
                            Control0..1
                            BindingUnless not suitable, these codes SHALL be taken from NoteType
                            (extensible to http://hl7.org/fhir/ValueSet/note-type)

                            The presentation types of notes.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            To convey the expectation for when the text is used.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            494. ClaimResponse.processNote.text
                            Definition

                            The explanation or description associated with the processing.

                            ShortNote explanatory text
                            Control1..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Required to provide human readable explanation.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            496. ClaimResponse.processNote.language
                            Definition

                            A code to define the language used in the text of the note.

                            ShortLanguage of the text
                            Comments

                            Only required if the language is different from the resource language.

                            Control0..1
                            BindingThe codes SHALL be taken from AllLanguages
                            (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

                            IETF language tag for a human language

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Note text may vary from the resource defined language.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            498. ClaimResponse.communicationRequest
                            Definition

                            Request for additional supporting or authorizing information.

                            ShortRequest for additional information
                            Comments

                            For example: professional reports, documents, images, clinical resources, or accident reports.

                            Control0..*
                            TypeReference(CommunicationRequest)
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Need to communicate insurer request for additional information required to support the adjudication.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            500. ClaimResponse.insurance
                            Definition

                            Financial instruments for reimbursement for the health care products and services specified on the claim.

                            ShortPatient insurance information
                            Comments

                            All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

                            Control0..*
                            TypeBackboneElement
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            At least one insurer is required for a claim to be a claim.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            502. ClaimResponse.insurance.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            504. ClaimResponse.insurance.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            506. ClaimResponse.insurance.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            508. ClaimResponse.insurance.sequence
                            Definition

                            A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

                            ShortInsurance instance identifier
                            Control1..1
                            TypepositiveInt
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            To maintain order of the coverages.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            510. ClaimResponse.insurance.focal
                            Definition

                            A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

                            ShortCoverage to be used for adjudication
                            Comments

                            A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

                            Control1..1
                            Typeboolean
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            To identify which coverage in the list is being used to adjudicate this claim.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            512. ClaimResponse.insurance.coverage
                            Definition

                            Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

                            ShortInsurance information
                            Control1..1
                            TypeReference(Coverage)
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Required to allow the adjudicator to locate the correct policy and history within their information system.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            514. ClaimResponse.insurance.businessArrangement
                            Definition

                            A business agreement number established between the provider and the insurer for special business processing purposes.

                            ShortAdditional provider contract number
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Providers may have multiple business arrangements with a given insurer and must supply the specific contract number for adjudication.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            516. ClaimResponse.insurance.claimResponse
                            Definition

                            The result of the adjudication of the line items for the Coverage specified in this insurance.

                            ShortAdjudication results
                            Comments

                            Must not be specified when 'focal=true' for this insurance.

                            Control0..1
                            TypeReference(ClaimResponse)
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            An insurer need the adjudication results from prior insurers to determine the outstanding balance remaining by item for the items in the curent claim.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            518. ClaimResponse.error
                            Definition

                            Errors encountered during the processing of the adjudication.

                            ShortProcessing errors
                            Comments

                            If the request contains errors then an error element should be provided and no adjudication related sections (item, addItem, or payment) should be present.

                            Control0..*
                            TypeBackboneElement
                            Is Modifierfalse
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Need to communicate processing issues to the requestor.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            520. ClaimResponse.error.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            522. ClaimResponse.error.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            524. ClaimResponse.error.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            526. ClaimResponse.error.itemSequence
                            Definition

                            The sequence number of the line item submitted which contains the error. This value is omitted when the error occurs outside of the item structure.

                            ShortItem sequence number
                            Control0..1
                            TypepositiveInt
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides references to the claim items.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            528. ClaimResponse.error.detailSequence
                            Definition

                            The sequence number of the detail within the line item submitted which contains the error. This value is omitted when the error occurs outside of the item structure.

                            ShortDetail sequence number
                            Control0..1
                            TypepositiveInt
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides references to the claim details within the claim item.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            530. ClaimResponse.error.subDetailSequence
                            Definition

                            The sequence number of the sub-detail within the detail within the line item submitted which contains the error. This value is omitted when the error occurs outside of the item structure.

                            ShortSubdetail sequence number
                            Control0..1
                            TypepositiveInt
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summaryfalse
                            Requirements

                            Provides references to the claim sub-details within the claim detail.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            532. ClaimResponse.error.code
                            Definition

                            An error code, from a specified code system, which details why the claim could not be adjudicated.

                            ShortError code detailing processing issues
                            Control1..1
                            BindingFor example codes, see AdjudicationErrorCodes
                            (example to http://hl7.org/fhir/ValueSet/adjudication-error)

                            The adjudication error codes.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supportfalse
                            Summarytrue
                            Requirements

                            Required to convey processing errors.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            534. ClaimResponse.error.expression
                            Definition

                            A simple subset of FHIRPath limited to element names, repetition indicators and the default child accessor that identifies one of the elements in the resource that caused this issue to be raised.

                            ShortFHIRPath of element(s) related to issue
                            Comments

                            The root of the FHIRPath is the resource or bundle that generated OperationOutcome. Each FHIRPath SHALL resolve to a single node.

                            Control0..*
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supportfalse
                            Summarytrue
                            Requirements

                            Allows systems to highlight or otherwise guide users to elements implicated in issues to allow them to be fixed more easily.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))