Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED)
0.1.0 - ci-build

Moderne Patient:innenabrechnung und Datenkommunikation on FHIR (MOPED) - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: MopedCoverageSelbstzahler - Detailed Descriptions

Draft as of 2025-10-31

Definitions for the MopedCoverageSelbstzahler resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Coverage
Definition

Financial instrument which may be used to reimburse or pay for health care products and services. Includes both insurance and self-payment.

ShortInsurance or medical plan or a payment agreement
Comments

The Coverage resource contains the insurance card level information, which is customary to provide on claims and other communications between providers and insurers.

Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Coverage.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Coverage.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. Coverage.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Coverage.status
Definition

The status of the resource instance.

Shortactive | cancelled | draft | entered-in-error
Comments

This element is labeled as a modifier because the status contains the code entered-in-error that marks the coverage as not currently valid.

Control1..1
BindingThe codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|5.0.0
(required to http://hl7.org/fhir/ValueSet/fm-status|5.0.0)

A code specifying the state of the resource instance.

Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Obligations
    ObligationsActor
    SHALL:populateMoped KH Actor
    SHALL:handleMoped Device Actor
    Summarytrue
    Requirements

    Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Coverage.kind
    Definition

    The nature of the coverage be it insurance, or cash payment such as self-pay.

    Shortinsurance | self-pay | other
    Control1..1
    BindingThe codes SHALL be taken from Kindhttp://hl7.org/fhir/ValueSet/coverage-kind|5.0.0
    (required to http://hl7.org/fhir/ValueSet/coverage-kind|5.0.0)
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Obligations
      ObligationsActor
      SHALL:populateMoped KH Actor
      Summarytrue
      Requirements

      This is used to implement conformance on other elements.

      Pattern Valueself-pay
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Coverage.type
      Definition

      The type of coverage: social program, medical plan, accident coverage (workers compensation, auto), group health or payment by an individual or organization.

      ShortCoverage category such as medical or accident
      Control0..1
      BindingThe codes SHOULD be taken from CoverageTypeAndSelfPayCodeshttp://hl7.org/fhir/ValueSet/coverage-type|5.0.0
      (preferred to http://hl7.org/fhir/ValueSet/coverage-type|5.0.0)

      The type of insurance: public health, worker compensation; private accident, auto, private health, etc.) or a direct payment by an individual or organization.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Obligations
        ObligationsActor
        SHALL:populateMoped KH Actor
        Summarytrue
        Requirements

        The order of application of coverages is dependent on the types of coverage.

        Pattern Value{
          "coding" : [{
            "system" : "http://terminology.hl7.org/CodeSystem/coverage-selfpay",
            "code" : "pay"
          }]
        }
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. Coverage.beneficiary
        Definition

        The party who benefits from the insurance coverage; the patient when products and/or services are provided.

        ShortPlan beneficiary
        Control1..1
        TypeReference(HL7® AT Core Patient Profile, Patient)
        Is Modifierfalse
        Must Supportfalse
        Obligations
          ObligationsActor
          SHALL:handleMoped Device Actor
          Summarytrue
          Requirements

          This is the party who receives treatment for which the costs are reimbursed under the coverage.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          16. Coverage.insurer
          Definition

          The program or plan underwriter, payor, insurance company.

          ShortIssuer of the policy
          Comments

          May provide multiple identifiers such as insurance company identifier or business identifier (BIN number).

          Control0..01
          TypeReference(Organization)
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Requirements

          Need to identify the issuer to target for claim processing and for coordination of benefit processing.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

          Guidance on how to interpret the contents of this table can be foundhere

          0. Coverage
          2. Coverage.status
          Obligations
            ObligationsActor
            SHALL:populateMoped KH Actor
            SHALL:handleMoped Device Actor
            4. Coverage.kind
            Obligations
              ObligationsActor
              SHALL:populateMoped KH Actor
              Pattern Valueself-pay
              6. Coverage.paymentBy
              8. Coverage.paymentBy.party
              TypeReference(HL7® AT Core Patient Profile)
              Obligations
                ObligationsActor
                SHALL:handleMoped Device Actor
                10. Coverage.type
                Obligations
                  ObligationsActor
                  SHALL:populateMoped KH Actor
                  Pattern Value{
                    "coding" : [{
                      "system" : "http://terminology.hl7.org/CodeSystem/coverage-selfpay",
                      "code" : "pay"
                    }]
                  }
                  12. Coverage.beneficiary
                  TypeReference(HL7® AT Core Patient Profile)
                  Obligations
                    ObligationsActor
                    SHALL:handleMoped Device Actor
                    14. Coverage.insurer
                    Control0..0

                    Guidance on how to interpret the contents of this table can be foundhere

                    0. Coverage
                    Definition

                    Financial instrument which may be used to reimburse or pay for health care products and services. Includes both insurance and self-payment.

                    ShortInsurance or medical plan or a payment agreement
                    Comments

                    The Coverage resource contains the insurance card level information, which is customary to provide on claims and other communications between providers and insurers.

                    Control0..*
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                    dom-6: A resource should have narrative for robust management (text.`div`.exists())
                    2. Coverage.id
                    Definition

                    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                    ShortLogical id of this artifact
                    Comments

                    Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

                    Control0..1
                    Typeid
                    Is Modifierfalse
                    Must Supportfalse
                    Summarytrue
                    4. Coverage.meta
                    Definition

                    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                    ShortMetadata about the resource
                    Control0..1
                    TypeMeta
                    Is Modifierfalse
                    Must Supportfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    6. Coverage.implicitRules
                    Definition

                    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                    ShortA set of rules under which this content was created
                    Comments

                    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

                    Control0..1
                    Typeuri
                    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    8. Coverage.language
                    Definition

                    The base language in which the resource is written.

                    ShortLanguage of the resource content
                    Comments

                    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                    Control0..1
                    BindingThe codes SHALL be taken from AllLanguages
                    (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

                    IETF language tag for a human language

                    Typecode
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    10. Coverage.text
                    Definition

                    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                    ShortText summary of the resource, for human interpretation
                    Comments

                    Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                    Control0..1
                    This element is affected by the following invariants: dom-6
                    TypeNarrative
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Alternate Namesnarrative, html, xhtml, display
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    12. Coverage.contained
                    Definition

                    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

                    ShortContained, inline Resources
                    Comments

                    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

                    Control0..*
                    This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
                    TypeResource
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Alternate Namesinline resources, anonymous resources, contained resources
                    14. Coverage.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    16. Coverage.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                    Must Supportfalse
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    18. Coverage.identifier
                    Definition

                    The identifier of the coverage as issued by the insurer.

                    ShortBusiness identifier(s) for this coverage
                    Comments

                    The main (and possibly only) identifier for the coverage - often referred to as a Member Id, Certificate number, Personal Health Number or Case ID. May be constructed as the concatenation of the Coverage.SubscriberID and the Coverage.dependant. Note that not all insurers issue unique member IDs therefore searches may result in multiple responses.

                    NoteThis is a business identifier, not a resource identifier (see discussion)
                    Control0..*
                    TypeIdentifier
                    Is Modifierfalse
                    Must Supportfalse
                    Summarytrue
                    Requirements

                    Allows coverages to be distinguished and referenced.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    20. Coverage.status
                    Definition

                    The status of the resource instance.

                    Shortactive | cancelled | draft | entered-in-error
                    Comments

                    This element is labeled as a modifier because the status contains the code entered-in-error that marks the coverage as not currently valid.

                    Control1..1
                    BindingThe codes SHALL be taken from FinancialResourceStatusCodes
                    (required to http://hl7.org/fhir/ValueSet/fm-status|5.0.0)

                    A code specifying the state of the resource instance.

                    Typecode
                    Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supportfalse
                    Obligations
                      ObligationsActor
                      SHALL:populateMoped KH Actor
                      SHALL:handleMoped Device Actor
                      Summarytrue
                      Requirements

                      Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      22. Coverage.kind
                      Definition

                      The nature of the coverage be it insurance, or cash payment such as self-pay.

                      Shortinsurance | self-pay | other
                      Control1..1
                      BindingThe codes SHALL be taken from Kind
                      (required to http://hl7.org/fhir/ValueSet/coverage-kind|5.0.0)
                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supportfalse
                      Obligations
                        ObligationsActor
                        SHALL:populateMoped KH Actor
                        Summarytrue
                        Requirements

                        This is used to implement conformance on other elements.

                        Pattern Valueself-pay
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        24. Coverage.paymentBy
                        Definition

                        Link to the paying party and optionally what specifically they will be responsible to pay.

                        ShortSelf-pay parties and responsibility
                        Control0..*
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supportfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        26. Coverage.paymentBy.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        28. Coverage.paymentBy.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        30. Coverage.paymentBy.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        32. Coverage.paymentBy.party
                        Definition

                        The list of parties providing non-insurance payment for the treatment costs.

                        ShortParties performing self-payment
                        Control1..1
                        TypeReference(HL7® AT Core Patient Profile)
                        Is Modifierfalse
                        Must Supportfalse
                        Obligations
                          ObligationsActor
                          SHALL:handleMoped Device Actor
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          34. Coverage.paymentBy.responsibility
                          Definition

                          Description of the financial responsibility.

                          ShortParty's responsibility
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supportfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          36. Coverage.type
                          Definition

                          The type of coverage: social program, medical plan, accident coverage (workers compensation, auto), group health or payment by an individual or organization.

                          ShortCoverage category such as medical or accident
                          Control0..1
                          BindingThe codes SHOULD be taken from CoverageTypeAndSelfPayCodes
                          (preferred to http://hl7.org/fhir/ValueSet/coverage-type|5.0.0)

                          The type of insurance: public health, worker compensation; private accident, auto, private health, etc.) or a direct payment by an individual or organization.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Must Supportfalse
                          Obligations
                            ObligationsActor
                            SHALL:populateMoped KH Actor
                            Summarytrue
                            Requirements

                            The order of application of coverages is dependent on the types of coverage.

                            Pattern Value{
                              "coding" : [{
                                "system" : "http://terminology.hl7.org/CodeSystem/coverage-selfpay",
                                "code" : "pay"
                              }]
                            }
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            38. Coverage.policyHolder
                            Definition

                            The party who 'owns' the insurance policy.

                            ShortOwner of the policy
                            Comments

                            For example: may be an individual, corporation or the subscriber's employer.

                            Control0..1
                            TypeReference(Patient, RelatedPerson, Organization)
                            Is Modifierfalse
                            Must Supportfalse
                            Summarytrue
                            Requirements

                            This provides employer information in the case of Worker's Compensation and other policies.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            40. Coverage.subscriber
                            Definition

                            The party who has signed-up for or 'owns' the contractual relationship to the policy or to whom the benefit of the policy for services rendered to them or their family is due.

                            ShortSubscriber to the policy
                            Comments

                            May be self or a parent in the case of dependants. A subscriber is only required on certain types of policies not all policies and that it is appropriate to have just a policyholder and a beneficiary when not other party can join that policy instance.

                            Control0..1
                            TypeReference(Patient, RelatedPerson)
                            Is Modifierfalse
                            Must Supportfalse
                            Summarytrue
                            Requirements

                            This is the party who is entitled to the benfits under the policy.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            42. Coverage.subscriberId
                            Definition

                            The insurer assigned ID for the Subscriber.

                            ShortID assigned to the subscriber
                            Control0..*
                            TypeIdentifier
                            Is Modifierfalse
                            Must Supportfalse
                            Summarytrue
                            Requirements

                            The insurer requires this identifier on correspondance and claims (digital and otherwise).

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            44. Coverage.beneficiary
                            Definition

                            The party who benefits from the insurance coverage; the patient when products and/or services are provided.

                            ShortPlan beneficiary
                            Control1..1
                            TypeReference(HL7® AT Core Patient Profile)
                            Is Modifierfalse
                            Must Supportfalse
                            Obligations
                              ObligationsActor
                              SHALL:handleMoped Device Actor
                              Summarytrue
                              Requirements

                              This is the party who receives treatment for which the costs are reimbursed under the coverage.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              46. Coverage.dependent
                              Definition

                              A designator for a dependent under the coverage.

                              ShortDependent number
                              Comments

                              Sometimes the member number is constructed from the subscriberId and the dependant number.

                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              For some coverages a single identifier is issued to the Subscriber and then an additional dependent number is issued to each beneficiary.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              48. Coverage.relationship
                              Definition

                              The relationship of beneficiary (patient) to the subscriber.

                              ShortBeneficiary relationship to the subscriber
                              Comments

                              Typically, an individual uses policies which are theirs (relationship='self') before policies owned by others.

                              Control0..1
                              BindingUnless not suitable, these codes SHALL be taken from SubscriberRelationshipCodes
                              (extensible to http://hl7.org/fhir/ValueSet/subscriber-relationship|5.0.0)

                              The relationship between the Subscriber and the Beneficiary (insured/covered party/patient).

                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Requirements

                              The relationship between the patient and the subscriber to determine coordination of benefits.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              50. Coverage.period
                              Definition

                              Time period during which the coverage is in force. A missing start date indicates the start date isn't known, a missing end date means the coverage is continuing to be in force.

                              ShortCoverage start and end dates
                              Control0..1
                              TypePeriod
                              Is Modifierfalse
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              Some insurers require the submission of the coverage term.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              52. Coverage.insurer
                              Definition

                              The program or plan underwriter, payor, insurance company.

                              ShortIssuer of the policy
                              Comments

                              May provide multiple identifiers such as insurance company identifier or business identifier (BIN number).

                              Control0..0
                              TypeReference(Organization)
                              Is Modifierfalse
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              Need to identify the issuer to target for claim processing and for coordination of benefit processing.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              54. Coverage.class
                              Definition

                              A suite of underwriter specific classifiers.

                              ShortAdditional coverage classifications
                              Comments

                              For example, class may be used to identify a class of coverage or employer group, policy, or plan.

                              Control0..*
                              TypeBackboneElement
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Requirements

                              The codes provided on the health card which identify or confirm the specific policy for the insurer.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              56. Coverage.class.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              58. Coverage.class.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              60. Coverage.class.modifierExtension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                              ShortExtensions that cannot be ignored even if unrecognized
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                              Summarytrue
                              Requirements

                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                              Alternate Namesextensions, user content, modifiers
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              62. Coverage.class.type
                              Definition

                              The type of classification for which an insurer-specific class label or number and optional name is provided. For example, type may be used to identify a class of coverage or employer group, policy, or plan.

                              ShortType of class such as 'group' or 'plan'
                              Control1..1
                              BindingUnless not suitable, these codes SHALL be taken from CoverageClassCodes
                              (extensible to http://hl7.org/fhir/ValueSet/coverage-class|5.0.0)

                              The policy classifications, e.g. Group, Plan, Class, etc.

                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              The insurer issued label for a specific health card value.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              64. Coverage.class.value
                              Definition

                              The alphanumeric identifier associated with the insurer issued label.

                              ShortValue associated with the type
                              Comments

                              For example, the Group or Plan number.

                              Control1..1
                              TypeIdentifier
                              Is Modifierfalse
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              The insurer issued label and identifier are necessary to identify the specific policy, group, etc..

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              66. Coverage.class.name
                              Definition

                              A short description for the class.

                              ShortHuman readable description of the type and value
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              Used to provide a meaningful description in correspondence to the patient.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              68. Coverage.order
                              Definition

                              The order of applicability of this coverage relative to other coverages which are currently in force. Note, there may be gaps in the numbering and this does not imply primary, secondary etc. as the specific positioning of coverages depends upon the episode of care. For example; a patient might have (0) auto insurance (1) their own health insurance and (2) spouse's health insurance. When claiming for treatments which were not the result of an auto accident then only coverages (1) and (2) above would be applicatble and would apply in the order specified in parenthesis.

                              ShortRelative order of the coverage
                              Control0..1
                              TypepositiveInt
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              Used in managing the coordination of benefits.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              70. Coverage.network
                              Definition

                              The insurer-specific identifier for the insurer-defined network of providers to which the beneficiary may seek treatment which will be covered at the 'in-network' rate, otherwise 'out of network' terms and conditions apply.

                              ShortInsurer network
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              Used in referral for treatment and in claims processing.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              72. Coverage.costToBeneficiary
                              Definition

                              A suite of codes indicating the cost category and associated amount which have been detailed in the policy and may have been included on the health card.

                              ShortPatient payments for services/products
                              Comments

                              For example by knowing the patient visit co-pay, the provider can collect the amount prior to undertaking treatment.

                              Control0..*
                              TypeBackboneElement
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Requirements

                              Required by providers to manage financial transaction with the patient.

                              Alternate NamesCoPay, Deductible, Exceptions
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              74. Coverage.costToBeneficiary.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              76. Coverage.costToBeneficiary.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              78. Coverage.costToBeneficiary.modifierExtension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                              ShortExtensions that cannot be ignored even if unrecognized
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                              Summarytrue
                              Requirements

                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                              Alternate Namesextensions, user content, modifiers
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              80. Coverage.costToBeneficiary.type
                              Definition

                              The category of patient centric costs associated with treatment.

                              ShortCost category
                              Comments

                              For example visit, specialist visits, emergency, inpatient care, etc.

                              Control0..1
                              BindingUnless not suitable, these codes SHALL be taken from CoverageCopayTypeCodes
                              (extensible to http://hl7.org/fhir/ValueSet/coverage-copay-type|5.0.0)

                              The types of services to which patient copayments are specified.

                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              Needed to identify the category associated with the amount for the patient.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              82. Coverage.costToBeneficiary.category
                              Definition

                              Code to identify the general type of benefits under which products and services are provided.

                              ShortBenefit classification
                              Comments

                              Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

                              Control0..1
                              BindingFor example codes, see BenefitCategoryCodes
                              (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory|5.0.0)
                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Requirements

                              Needed to convey the category of service or product for which eligibility is sought.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              84. Coverage.costToBeneficiary.network
                              Definition

                              Is a flag to indicate whether the benefits refer to in-network providers or out-of-network providers.

                              ShortIn or out of network
                              Control0..1
                              BindingFor example codes, see NetworkTypeCodes
                              (example to http://hl7.org/fhir/ValueSet/benefit-network|5.0.0)
                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Requirements

                              Needed as in or out of network providers are treated differently under the coverage.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              86. Coverage.costToBeneficiary.unit
                              Definition

                              Indicates if the benefits apply to an individual or to the family.

                              ShortIndividual or family
                              Control0..1
                              BindingFor example codes, see UnitTypeCodes
                              (example to http://hl7.org/fhir/ValueSet/benefit-unit|5.0.0)
                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Requirements

                              Needed for the understanding of the benefits.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              88. Coverage.costToBeneficiary.term
                              Definition

                              The term or period of the values such as 'maximum lifetime benefit' or 'maximum annual visits'.

                              ShortAnnual or lifetime
                              Control0..1
                              BindingFor example codes, see BenefitTermCodes
                              (example to http://hl7.org/fhir/ValueSet/benefit-term|5.0.0)
                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Requirements

                              Needed for the understanding of the benefits.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              90. Coverage.costToBeneficiary.value[x]
                              Definition

                              The amount due from the patient for the cost category.

                              ShortThe amount or percentage due from the beneficiary
                              Comments

                              Amount may be expressed as a percentage of the service/product cost or a fixed amount of currency.

                              Control0..1
                              TypeChoice of: Quantity(SimpleQuantity), Money
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              Needed to identify the amount for the patient associated with the category.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              92. Coverage.costToBeneficiary.exception
                              Definition

                              A suite of codes indicating exceptions or reductions to patient costs and their effective periods.

                              ShortExceptions for patient payments
                              Control0..*
                              TypeBackboneElement
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Requirements

                              Required by providers to manage financial transaction with the patient.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              94. Coverage.costToBeneficiary.exception.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              96. Coverage.costToBeneficiary.exception.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              98. Coverage.costToBeneficiary.exception.modifierExtension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                              ShortExtensions that cannot be ignored even if unrecognized
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                              Summarytrue
                              Requirements

                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                              Alternate Namesextensions, user content, modifiers
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              100. Coverage.costToBeneficiary.exception.type
                              Definition

                              The code for the specific exception.

                              ShortException category
                              Control1..1
                              BindingFor example codes, see ExampleCoverageFinancialExceptionCodes
                              (example to http://hl7.org/fhir/ValueSet/coverage-financial-exception|5.0.0)

                              The types of exceptions from the part or full value of financial obligations such as copays.

                              TypeCodeableConcept
                              Is Modifierfalse
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              Needed to identify the exception associated with the amount for the patient.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              102. Coverage.costToBeneficiary.exception.period
                              Definition

                              The timeframe the exception is in force.

                              ShortThe effective period of the exception
                              Control0..1
                              TypePeriod
                              Is Modifierfalse
                              Must Supportfalse
                              Summarytrue
                              Requirements

                              Needed to identify the applicable timeframe for the exception for the correct calculation of patient costs.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              104. Coverage.subrogation
                              Definition

                              When 'subrogation=true' this insurance instance has been included not for adjudication but to provide insurers with the details to recover costs.

                              ShortReimbursement to insurer
                              Comments

                              Typically, automotive and worker's compensation policies would be flagged with 'subrogation=true' to enable healthcare payors to collect against accident claims.

                              Control0..1
                              Typeboolean
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supportfalse
                              Summaryfalse
                              Requirements

                              See definition for when to be used.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              106. Coverage.contract
                              Definition

                              The policy(s) which constitute this insurance coverage.

                              ShortContract details
                              Control0..*
                              TypeReference(Contract)
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Requirements

                              To reference the legally binding contract between the policy holder and the insurer.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              108. Coverage.insurancePlan
                              Definition

                              The insurance plan details, benefits and costs, which constitute this insurance coverage.

                              ShortInsurance plan details
                              Control0..1
                              TypeReference(InsurancePlan)
                              Is Modifierfalse
                              Must Supportfalse
                              Summaryfalse
                              Requirements

                              To associate the plan benefits and costs with the coverage which is an instance of that plan.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))